Analysis of the t′ + c Phase Content from ZrO2-16 Mol.% Y2O3-16 Mol.% Ta2O5 Mechanoactivated Powder Mixtures in Coatings Deposited by Suspension Plasma Spraying
Source abstract
Abstract
Abstract Gas turbines or power generation engines used in transportation, defense, and energy sectors use thermal barrier coatings (TBCs) to protect metallic components exposed to high-temperature conditions. This work focuses on the in situ synthesis during coating deposition by suspension plasma spraying (SPS) from powders mechanoactivated by high-energy ball milling of ZrO2-16 mol.% YO1.5-16 mol.% TaO2.5 (16YTZ) for applications in TBCs. This composition is expected to present a non-transformable tetragonal phase (t′ phase), suitable to overcome the thermodynamic limits of the mostly used conventional 6-8 wt.% yttria stabilized zirconia (YSZ). The 16YTZ powder mixtures were mechanoactivated by either planetary ball milling (240 RPM) and high-energy ball milling (1700 RPM). These mechanoactivated powders were used to obtain densified samples through sintering at 1500 °C for 2 and 20 h, as well as to deposit coatings by SPS at a stand-off distance between 60 and 80 mm using Ar/He as the plasma forming gas. The ceramics and coatings were characterized by XRD, SEM, and Raman spectroscopy. The densified ceramics showed a high t′ phase content, i.e., > 98% of the 16YTZ system, with an average tetragonality of 1.0267. Coatings deposited at a stand-off distance of 60 mm, and a deposition rate of 33 µm/min, present a porosity of less than 5%, and a tetragonality of 1.0187, which is higher than that of standard YSZ coatings. Phase quantification by Rietveld refinement revealed a multiphase condition as result of the heat transfer in the plasma plume leading to in situ synthesis of the ZrO2 base solid solutions, formed by 89.2 wt.% of t′ + c phases (48.4 and 40.8 wt.% of t′ and c-ZrO2, respectively) 8.1% monoclinic ZrO2, 2.4% cubic Y2O3 and 0.4% orthorhombic Ta2O5 on average. Achieving a high percentage of t' + c phases in the coating with a porosity of less than 5% is a significant accomplishment. This success is closely linked to the fact that tetragonality exceeds that of YSZ. These results provide a solid foundation for future experimental designs aimed at optimizing spray parameters.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Catalytic Processes in Materials Science · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. L. Guo, W. He, W. Chen, Z. Xue, J. He, Y. Guo, Y. Wu, L. Gao, D. Li, Z. Zhang, L. Wei, Y. Gao, T. Zhang, J. Qiao, Q. Li, and H. Guo, Progress on High-Temperature Protective Coatings for Aero-Engines, Surf. Sci. Tech., 2023, 1(6), p 1–39.10.1007/s44251-023-00005-6 ↗
2. D.R. Clarke, M. Oechsner, and N.P. Padture, Thermal-Barrier Coatings for More Efficient Gas-Turbine Engines, MRS Bull., 2012, 37(10), p 891–898.10.1557/mrs.2012.232 ↗
3. M.C. Gurak, "Studies of the Yttrium Tantalate-Zirconium Oxide Quasi-Binary," Ph.D. Thesis, Harvard University, 2017
4. J. Wang, L. Chen, M. Wang, C. Zhang, Y. Yu, J. Sun, X. Chen, Y. Wang, P. Liu, and Q. Jing, Influence of Gd2O3 Substitution on Thermal and Mechanical Properties of ZrO2-Ta2O5-Y2O3, J. Eur. Ceram. Soc., 2021, 41(2), p 1654–1663.10.1016/j.jeurceramsoc.2020.10.011 ↗
5. D.B. Marshall, A.G. Evans, and M. Drory, Transformation Toughening in Ceramics, Fract. Mech. Ceram., 1983, 6(190144), p 289–307.
6. D. Kim, Effect of Ta2O5, Nb2O5, and HfO2 Alloying on the Transformability of Y2O3-Stabilized Tetragonal ZrO2, J. Am. Ceram. Soc., 1990, 73(1), p 115–120.10.1111/j.1151-2916.1990.tb05100.x ↗
7. J. Li, Q. Zhou, L. Yang, Y. Zhou, J. Zhao, J. Huang, and Y. Wei, Ferroelastic Deformation Mechanism and Mechanical Properties of [001]-Oriented YSZ Film by Indentation, J. Alloys Compd., 2022, 889, p 161557.10.1016/j.jallcom.2021.161557 ↗
8. R.L. Jones, R.F. Reidy, and D. Mess, Scandia, Yttria-Stabilized Zirconia for Thermal Barrier Coatings, Surf. Coatings Technol., 1996, 82(1–2), p 70–76.10.1016/0257-8972(95)02646-0 ↗
9. N.M. Abdul-Jabbar, A.N. Fernandez, R.W. Jackson, D. Park, W.D. Summers, and C.G. Levi, Interactions between Zirconia–Yttria–Tantala Thermal Barrier Oxides and Silicate Melts, Acta Mater., 2020, 185, p 171–180.10.1016/j.actamat.2019.11.060 ↗
10. M. Gurak, Q. Flamant, L. Laversenne, and D.R. Clarke, On the Yttrium Tantalate—Zirconia Phase Diagram, J. Eur. Ceram. Soc., 2018, 38(9), p 3317–3324.10.1016/j.jeurceramsoc.2018.03.012 ↗
11. S. Raghavan, H. Wang, W.D. Porter, R.B. Dinwiddie, and M.J. Mayo, Thermal Properties of Zirconia Co-Doped with Trivalent and Pentavalent Oxides, Acta Mater., 2001, 49(1), p 169–179.10.1016/S1359-6454(00)00295-0 ↗
12. Y. Shen, R.M. Leckie, C.G. Levi, and D.R. Clarke, Low Thermal Conductivity without Oxygen Vacancies in Equimolar YO1.5 + TaO2.5- and YbO1.5 + TaO2.5-Stabilized Tetragonal Zirconia Ceramics, Acta Mater., 2010, 58(13), p 4424–4431.10.1016/j.actamat.2010.04.040 ↗
13. P.L. Fauchais, J.V.R. Heberlein, and M.I. Boulos, Thermal Spray Fundamentals, Springer, New York, 2014.10.1007/978-0-387-68991-3 ↗
14. S. Mahade, R. Li, N. Curry, S. Björklund, N. Markocsan, and P. Nylén, Isothermal Oxidation Behavior of Gd2Zr2O7/YSZ Multilayered Thermal Barrier Coatings, Int. J. Appl. Ceram. Technol., 2016, 13(3), p 443–450.10.1111/ijac.12527 ↗
15. B. Liang and C. Ding, Thermal Shock Resistances of Nanostructured and Conventional Zirconia Coatings Deposited by Atmospheric Plasma Spraying, Surf. Coatings Technol., 2005, 197(2–3), p 185–192.10.1016/j.surfcoat.2004.08.225 ↗
16. X. Chen, H. Honda, S. Kuroda, H. Araki, H. Murakami, M. Watanabe, and Y. Sakka, Highly Segmented Thermal Barrier Coatings Deposited by Suspension Plasma Spray: Effects of Spray Process on Microstructure, J. Therm. Spray Technol., 2016, 25(8), p 1638–1649.10.1007/s11666-016-0469-6 ↗
17. J. Lee, S. Lee, H.N. Han, W. Kim, and N.M. Hwang, Yttrium Oxyfluoride Coatings Deposited by Suspension Plasma Spraying Using Coaxial Feeding, Coatings, 2020, 10(5), p 1–14.10.3390/coatings10050481 ↗
18. W. Fan and Y. Bai, Review of Suspension and Solution Precursor Plasma Sprayed Thermal Barrier Coatings, Ceram. Int., 2016, 42(13), p 14299–14312.10.1016/j.ceramint.2016.06.063 ↗
19. E. Meillot, S. Vincent, C. Caruyer, D. Damiani, and J.P. Caltagirone, Modelling the Interactions between a Thermal Plasma Flow and a Continuous Liquid Jet in a Suspension Spraying Process, J. Phys. D Appl. Phys., 2013, 46(22), p 224017.10.1088/0022-3727/46/22/224017 ↗
20. A.G. González, "Étude du Comportement à Haute Temperature de Revêtements Nanostructurés Elaborés Par Projection Thermique (Combustion et Plasma) à Partir Poudres et Suspensions." Ph.D. Thesis, Limoges University, 2014, in Spanish
21. G. Darut, H. Ageorges, A. Denoirjean, and P. Fauchais, Tribological Performances of YSZ Composite Coatings Manufactured by Suspension Plasma Spraying, Surf. Coatings Technol., 2013, 217, p 172–180.10.1016/j.surfcoat.2012.12.008 ↗
22. A.G. González, H. Ageorges, O. Rojas, E. López, F.M. Hurtado, and F. Vargas, Efecto de la Microestructura y la Microdureza Sobre la Resistencia al Desgaste de Recubrimientos Elaborados por Proyección Térmica por Plasma Atmosférico a Partir de Circona-Alúmina, Circona-Itria y Circona-Ceria (Effect of Microstructure and Microhardness on the Wear Resistance of Zirconia-Alumina, Zirconia-Yttria and Zirconia-Ceria Coatings Manufactured by Atmospheric Plasma Spraying), Bol. la Soc. Esp. Ceram. y Vidr., 2015, 54(3), p 124–132 (in Spanish)10.1016/j.bsecv.2015.05.005 ↗
23. Y. Yao, D. Wu, X. Zhao, and F. Yang, Premature Failure Induced by Non-Equilibrium Grain-Boundary Tantalum Segregation in Air-Plasma Sprayed ZrO2-YO1.5-TaO2.5 Thermal Barrier Coatings, Int. J. Miner. Metall. Mater., 2022, 29(12), p 2189–2200.10.1007/s12613-021-2394-z ↗
24. F.-L. Toma, S. Gruber, A. Selbmann, S. Tkachenko, O. Kunze, K. Zabransky, C. Leyens, L. Čelko, and M. Tajmar, Performance of Suspension Sprayed YSZ Thermal Barrier Coatings on Inconel 718 Substrates Produced by Laser Powder Bed Fusion, Therm. Spray 2022 Proc. from Int. Therm. Spray Conf., May 4-6, 2022 (Viena, Austria) ASM International, 2022, 84369, p 645–653.10.31399/asm.cp.itsc2022p0645 ↗
25. B.H. Toby, R Factors in Rietveld Analysis: How Good Is Good Enough?, Powder Diffr., 2006, 21(1), p 67–70.10.1154/1.2179804 ↗
26. L.B. Mccusker, R.B. Von Dreele, D.E. Cox, D. Louër, and P. Scardi, Rietveld Refinement Guidelines, J. Appl. Crystallogr., 1999, 32(1), p 36–50.10.1107/S0021889898009856 ↗
27. D. Chen, J. Lu, C. Sun, Q. Wang, and X. Ning, Microstructure and Thermal Cycling Behavior of Ta2O5 and Y2O3 Co-Doped ZrO2 Coatings, J. Therm. Spray Technol., 2023, 32(5), p 1327–1337.10.1007/s11666-022-01525-7 ↗
28. T.A. Schaedler, "Phase Evolution in the YO1. 5-TiO2-ZrO2 System and Effects on Ionic Conductivity and Toughness," Ph.D. Thesis, University of California, 200610.1016/j.actamat.2005.03.010 ↗
29. F. Pitek, "A Study of the Zirconia-Yttria-Tantala System as a Potential Thermal Barrier Oxide," Ph.D. Thesis, University of California, 2006
30. T.A. Schaedler, R.M. Leckie, S. Krämer, A.G. Evans, and C.G. Levi, Toughening of Nontransformable t -YSZ by Addition of Titania, J. Am. Ceram. Soc., 2007, 90(12), p 3896–3901.10.1111/j.1551-2916.2007.01990.x ↗
31. A.V. Virkar and R.L.K. Matsumoto, Ferroelastic Domain Switching as a Toughening Mechanism in Tetragonal Zirconia, J. Am. Ceram. Soc., 1986, 69(10), p C-362–C−364.10.1111/j.1151-2916.1986.tb07341.x ↗
32. X. Niu, M. Xie, F. Zhou, R. Mu, X. Song, and S. An, Substituent Influence of Yttria by Gadolinia on the Tetragonal Phase Stability for Y2O3-Ta2O5-ZrO2 Ceramics at 1300 °C, J. Mater. Sci. Technol., 2014, 30(4), p 381–386.10.1016/j.jmst.2013.12.008 ↗
33. J. Rios, A. Restrepo, A. Zuleta, F. Bolívar, J. Castaño, E. Correa, and F. Echeverria, Effect of Ball Size on the Microstructure and Morphology of Mg Powders Processed by High-Energy Ball Milling, Metals (Basel), 2021, 11(10), p 1621.10.3390/met11101621 ↗
34. C. Barrett, Z. Stein, J. Hernandez, R. Naraparaju, U. Schulz, L. Tetard, and S. Raghavan, Detrimental Effects of Sand Ingression in Jet Engine Ceramic Coatings Captured with Raman-Based 3D Rendering, J. Eur. Ceram. Soc., 2021, 41(2), p 1664–1671.10.1016/j.jeurceramsoc.2020.09.050 ↗
35. H.-U. Hummel, R. Fackler, and P. Remmert, Tantaloxide Durch Gasphasenhydrolyse, Druckhydrolyse Und Transportreaktion Aus 2H-TaS2: Synthesen von TT-Ta2O5 Und T-Ta2O5 Und Kristallstruktur von T-Ta2O5, Chem. Ber., 1992, 125(3), p 551–556.10.1002/cber.19921250304 ↗
36. A. Fert, Structure de Quelques Oxydes de Terres Rares, Bull. la Société française Minéralogie Cristallogr., 1962, 85(3), p 267–270.10.3406/bulmi.1962.5577 ↗
37. R.E. Hann, P.R. Suitch, and J.L. Pentecost, Monoclinic Crystal Structures of ZrO2 and HfO2 Refined from X-ray Powder Diffraction Data, J. Am. Ceram. Soc., 1985, 68(10), p C-285–C−286.
38. N. Igawa and Y. Ishii, Crystal Structure of Metastable Tetragonal Zirconia up to 1473 K, J. Am. Ceram. Soc., 2001, 84(5), p 1169–1171.10.1111/j.1151-2916.2001.tb00808.x ↗
39. C. A. Macauley, "Phase Equilibria and Toughness of Zirconia-Based Thermal Barrier Coatings," Ph.D. Thesis, University of California, 2016
40. A. Loganathan and A.S. Gandhi, Effect of High-Temperature Aging on the Fracture Toughness of Ytterbia-Stabilized T′ Zirconia, Scr. Mater., 2012, 67(3), p 285–288.10.1016/j.scriptamat.2012.05.001 ↗