Mechanical Properties of Novel Arc-Sprayed Partially Amorphous Iron-Based Alloys Under Cryogenic Temperature and Hydrogen Influence
Source abstract
Abstract
Abstract Previous own works revealed that novel partially amorphous Fe-based alloys have a combination of properties that are beneficial for the application in liquid hydrogen (LH2) tanks, such as low thermal diffusivity, little porosity, and good adhesion. The influence of cryogenic temperatures or hydrogen on coating tensile strength, on the other hand, has not been investigated yet for this material. However, this is crucial for the long-term durability of the coatings under hydrogen and other alternative fuels. Thus, in this work, tubular coating tensile (TCT) tests were performed at room temperature, cryogenic temperatures and after hydrogen charging. For this, a methodology for hydrogen charging was developed to identify a possible regime being sufficient for inducing a measurable amount of hydrogen. Subsequently, the fracture surfaces were evaluated analytically, optically and profilometrically. Under cryogenic conditions, a significant increase in tensile strength and finer structures of the fracture surfaces were observed. The TCT tests with ex-situ hydrogen charging revealed a small reduction in tensile strength and ductility compared to specimens tested at room temperature, proven by the coarse structure of the fracture surface.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · High-Temperature Coating Behaviors · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. German BMWi: The National Hydrogen Strategy. Federal Ministry for Economic Affairs and Energy (Ed.). In German: Die Nationale Wasserstoffstrategie. Bundesministerium für Wirtschaft und Energie (Hrsg.). Available online at: https://www.bmwk.de/Redaktion/DE/Publikationen/Energie/die-nationale-wasserstoffstrategie.pdf?__blob=publicationFile. Last checked June 2020.
2. European Commission (2020): A European Green Deal. Brussels. In German: Europäische Kommission (2020): Ein europäischer Green Deal. Brüssel. Available online at: https://ec.europa.eu/info/strategy/priorities-2019-2024/european-green-deal_de. Last checked June 2024.
3. Fraunhofer ISI; Fraunhofer ISE (ed.): A hydrogen roadmap for Germany. Freiburg. In German: Eine Wasserstoff-Roadmap für Deutschland. Freiburg. Available online at: https://www.ise.fraunhofer.de/content/dam/ise/de/documents/publications/studies/2019-10_Fraunhofer_Wasserstoff-Roadmap_fuer_Deutschland.pdf. Last checked June 2024.
4. Frost & Sullivan (ed.): Study on Disruptive Innovations in Production, Storage, and Transportation of Hydrogen. Santa Clara (US-CA), June 2020.
5. J.-H. Kim and M.-H. Lee, A Study on Cavitation Erosion and Corrosion Behavior of Al- Zn-, Cu-, and Fe-Based Coatings Prepared By Arc Spraying, J Therm Spray Tech, 2010, 19(6), p 1224–1230. https://doi.org/10.1007/s11666-010-9521-010.1007/s11666-010-9521-0 ↗
6. F. Lang and W. Krömmer, Economic and Ecological Benefits of Using Gas Mixtures For Arc Spraying, Tagungsunterlagen 10 Kolloquium Hochgeschwindigkeits-Flammspritzen / 10th Colloquium Hvof Spraying: 29./30. October 2015, Erding, Conference Proceedings, C. Penszior, Ed., Gemeinschaft Thermisches Spritzen e.V (Association of Thermal Sprayers), 2015, p 79–88.
7. J. Chi, A. Zhang, S. Xie and C. Jin, Process Optimization and Residual Stress Measurement for Arc Spraying Rapid Tooling, J. Xi’an Jiaotong Univ., 2014, 48(12), p 126–130.
8. H.-A. Mathesius and W. Krömmer, Praxis des thermischen Spritzens: Anleitung für das Fachpersonal. In German, 2nd ed., DVS Media, 2014 (in Ger).
9. L. Pawłowski, The Science and Engineering of Thermal Spray Coatings, 2nd ed., Wiley, 2008.10.1002/9780470754085 ↗
10. K. Bobzin, M. Öte and T. Königstein, Investigation of Amorphous/Nanocrystalline Iron-Based Thermal Barrier Coatings, J Therm Spray Tech, 2017, 26(3), p 388–397. https://doi.org/10.1007/s11666-016-0520-710.1007/s11666-016-0520-7 ↗
11. W. Guo, Y. Wu, J. Zhang, S. Hong, G. Li, G. Ying, J. Guo and Y. Qin, Fabrication and Characterization of Thermal-Sprayed Fe-Based Amorphous/Nanocrystalline Composite Coatings: An Overview, J Therm Spray Tech, 2014, 23(7), p 1157–1180. https://doi.org/10.1007/s11666-014-0096-z10.1007/s11666-014-0096-z ↗
12. M. Hauer, A. Gericke, L. Möhrke, B. Allebrodt and K.-M. Henkel, Highly Efficient Thermal Barrier Coatings Based on Arc Spraying of Amorphous Fe-based Alloys and NiCrAlY for Use in LH2 Tanks and Other Cryogenic Environments, J Therm Spray Tech, 2023, 32(2–3), p 327–338. https://doi.org/10.1007/s11666-023-01548-810.1007/s11666-023-01548-8 ↗
13. Technical Committee CEN/TC 240 Thermal spraying and thermally sprayed coatings, Thermal Spraying—Tubular coating tensile test, EN 17393, CENELEC, Brussels, 2020.
14. I. Maroef, D.L. Olson, M. Eberhart and G.R. Edwards, Hydrogen Trapping in Ferritic Steel Weld Metal, Int. Mater. Rev., 2002, 47(4), p 191–223. https://doi.org/10.1179/09506600222500654810.1179/095066002225006548 ↗
15. M. Rhode, T. Schaupp, C. Münster, T. Mente, T. Böllinghaus and T. Kannengießer, Hydrogen Determination in Welded Specimens by Carrier Gas Hot Extraction—A Review on the Main Parameters and Their Effect on Hydrogen Measurement, Weld World, 2019, 63(2), p 511–526. https://doi.org/10.1007/s40194-018-0664-910.1007/s40194-018-0664-9 ↗
16. C. Yang, Y.H. Jo, Y. Ikeda, F. Körmann and S.S. Sohn, Effects of Cryogenic Temperature on Tensile and Impact Properties in a Medium-Entropy VCoNi Alloy, J. Mater. Sci. Technol., 2021, 90, p 159–167. https://doi.org/10.1016/j.jmst.2021.02.03410.1016/j.jmst.2021.02.034 ↗
17. H. Pinto et al., The Effect of Hydrogen on the Deterioration of Austenitic Steels During Wear at Cryogenic Temperature, Wear, 2005, 259(1–6), p 424–431. https://doi.org/10.1016/j.wear.2005.02.05710.1016/j.wear.2005.02.057 ↗
18. P. Fernández-Pisón, J.A. Rodríguez-Martínez, E. García-Tabarés, I. Avilés-Santillana and S. Sgobba, Flow and Fracture of Austenitic Stainless Steels at Cryogenic Temperatures, Eng. Fract. Mech., 2021, 258, 108042. https://doi.org/10.1016/j.engfracmech.2021.10804210.1016/j.engfracmech.2021.108042 ↗
19. S. Chen, C. Huang, P.-Y. Liu et al., Hydrogen Trapping and Embrittlement in Metals—A Review, Int. J. Hydrogen Energy, 2024 https://doi.org/10.1016/j.ijhydene.2024.04.07610.1016/j.ijhydene.2024.04.076 ↗