Mechanism of Strength and Toughness Regulation of Laser Cladding Coatings Based on Interfacial Composite Textures
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Material Properties and Applications · Material Selection and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. L. Li, L.L. Liu, X. Li, P. Guo, P. Ke and A. Wang, Enhanced tribocorrosion performance of Cr/GLC multilayered films for marine protective application, ACS Appl. Mater. Interfaces, 2018, 10, p 13187–13198. https://doi.org/10.1021/acsami.8b0062810.1021/acsami.8b00628 ↗
2. L. Wang, S. Liu, J. Gou, Q. Zhang, F. Zhou, Y. Wang and R. Chu, Study on the wear resistance of graphene modified nanostructured Al2O3/TiO2 coatings, Appl. Surf. Sci., 2019, 492, p 272–279. https://doi.org/10.1016/j.apsusc.2019.06.10210.1016/j.apsusc.2019.06.102 ↗
3. Y. Qi, W. Liang, Q. Miao, J. Yi, H. Lin, Y. Liu and H. Ma, Role of the nitrogen ratio on mechanical properties and wear resistance of CrN/Fe functionally graded coating produced by double glow plasma alloying, Appl. Surf. Sci., 2022, 585, 152735. https://doi.org/10.1016/j.apsusc.2022.15273510.1016/j.apsusc.2022.152735 ↗
4. J. Kong, C. Li, X. Sun, Y. Xuan, H. Zhai, A. Li, Q. Wang and F. Zhou, Improved tribological properties and corrosion protection of CrN coating by ultrathin composite oxide interlayer, Appl. Surf. Sci., 2021, 541, 148606. https://doi.org/10.1016/j.apsusc.2020.14860610.1016/j.apsusc.2020.148606 ↗
5. C.K. Sahoo and M. Masanta, Microstructure and mechanical properties of TiC-Ni coating on AISI304 steel produced by TIG cladding process, J. Mater. Process. Technol., 2017, 240, p 126–137. https://doi.org/10.1016/j.jmatprotec.2016.09.01810.1016/j.jmatprotec.2016.09.018 ↗
6. C. Li, L. Wang, L. Shang, X. Cao, G. Zhang, Y. Yu, W. Li, S. Zhang and H. Hu, Mechanical and high-temperature tribological properties of CrAlN/TiSiN multilayer coating deposited by PVD, Ceram. Int., 2021, 47, p 29285–29294. https://doi.org/10.1016/j.ceramint.2021.07.09310.1016/j.ceramint.2021.07.093 ↗
7. H.G. Li, Y.J. Huang, W.J. Zhao, T. Chen, J.F. Sun, D.Q. Wei, Q. Du, Y.C. Zou, Y.Z. Lu, P. Zhu, X. Lu and A.H.W. Ngan, Overcoming the strength-ductility trade-off in an additively manufactured CoCrFeMnNi high entropy alloy via deep cryogenic treatment, Addit. Manuf., 2022, 50, 102546. https://doi.org/10.1016/j.addma.2021.10254610.1016/j.addma.2021.102546 ↗
8. G. Wu, Q. Chen, Z. Lu and G. Zhang, Results in physics bio-inspired AlSiCN/Ti hierarchical coatings with high toughness by efficient energy dissipation, Results Phys., 2019, 14, 102358. https://doi.org/10.1016/j.rinp.2019.10235810.1016/j.rinp.2019.102358 ↗
9. C. Hu, Y. Sakka, S. Grasso, T. Nishimura, S. Guo and H. Tanaka, Shell-like nanolayered Nb4AlC3 ceramic with high strength and toughness, Scripta Mater., 2011, 64, p 765–768. https://doi.org/10.1016/j.scriptamat.2010.12.04510.1016/j.scriptamat.2010.12.045 ↗
10. S.M. Liang, H.M. Ji and X.W. Li, A high-strength and high-toughness nacreous structure in a deep-sea Nautilus shell: critical role of platelet geometry and organic matrix, J. Mater. Sci. Technol., 2021, 88, p 189–202. https://doi.org/10.1016/j.jmst.2021.01.08210.1016/j.jmst.2021.01.082 ↗
11. Y. Nie, D. Li and Q. Luo, A crack-bridging model of brick and mortar architecture considering the anisotropic property, Compos. Struct., 2023, 312, 116868. https://doi.org/10.1016/j.compstruct.2023.11686810.1016/j.compstruct.2023.116868 ↗
12. V. Rodríguez-García, M. Herráez, V. Martínez and R. Guzman de Villoria, Interlaminar and translaminar fracture toughness of automated manufactured bio-inspired CFRP laminates, Compos. Sci. Technol., 2022, 219, 109236. https://doi.org/10.1016/j.compscitech.2021.10923610.1016/j.compscitech.2021.109236 ↗
13. G. Tan, J. Zhang, L. Zheng, D. Jiao, Z. Liu, Z. Zhang and R.O. Ritchie, Nature-inspired nacre-like composites combining human tooth-matching elasticity and hardness with exceptional damage tolerance, Adv. Mater., 2019, 31, p 1–9. https://doi.org/10.1002/adma.20190460310.1002/adma.201904603 ↗
14. B.R. Lawn and J.J.W. Lee, Analysis of fracture and deformation modes in teeth subjected to occlusal loading, Acta Biomater., 2009, 5, p 2213–2221. https://doi.org/10.1016/j.actbio.2009.02.00110.1016/j.actbio.2009.02.001 ↗
15. J. Rivera, M.S. Hosseini, D. Restrepo, S. Murata and D. Vasile, Toughening mechanisms of the elytra of the diabolical ironclad beetle, Nature, 2020, 586, p 543–548. https://doi.org/10.1038/s41586-020-2813-810.1038/s41586-020-2813-8 ↗
16. Z. Cai, Z. Li, Y. Ding, J. Zheng, J. Liu and Z. Zhou, Preparation and impact resistance performance of bionic sandwich structure inspired from beetle forewing, Compos. Part B Eng., 2019, 161, p 490–501. https://doi.org/10.1016/j.compositesb.2018.12.13910.1016/j.compositesb.2018.12.139 ↗
17. Z. Liu, Z. Weng, Z. Zhai, N. Huang, Z. Zhang, J. Tan, C. Jiang, D. Jiao, G. Tan, J. Zhang, X. Jiang, Z. Zhang and R.O. Ritchie, Hydration-induced nano- to micro-scale self-recovery of the tooth enamel of the giant panda, Acta Biomater., 2018, 81, p 267–277. https://doi.org/10.1016/j.actbio.2018.09.05310.1016/j.actbio.2018.09.053 ↗
18. H. Xiao, L. Lei, J. Peng, D. Yang, Q. Zeng, J. Zheng and Z. Zhou, Research of the role of microstructure in the wear mechanism of canine and bovine enamel, J. Mech. Behav. Biomed. Mater., 2019, 92, p 33–39. https://doi.org/10.1016/j.jmbbm.2018.12.03610.1016/j.jmbbm.2018.12.036 ↗
19. W. Huang, D. Restrepo, J.Y. Jung, F.Y. Su, Z. Liu, R.O. Ritchie, J. McKittrick, P. Zavattieri and D. Kisailus, Multiscale toughening mechanisms in biological materials and bioinspired designs, Adv. Mater., 2019, 31, p 1–37. https://doi.org/10.1002/adma.20190156110.1002/adma.201901561 ↗
20. U.G.K. Wegst, H. Bai, E. Saiz, A.P. Tomsia and R.O. Ritchie, Bioinspired structural materials, Nat. Mater., 2015, 14, p 23–36. https://doi.org/10.1038/nmat408910.1038/nmat4089 ↗
21. F. Movassagh-Alanagh and M. Mahdavi, Improving wear and corrosion resistance of AISI 304 stainless steel by a multilayered nanocomposite Ti/TiN/TiSiN coating, Surf. Interfaces, 2020, 18, 100428. https://doi.org/10.1016/j.surfin.2019.10042810.1016/j.surfin.2019.100428 ↗
22. Y. Li, Q. Ye, Y. Zhu, L. Zhang, Y. He, S. Zhang and J.J. Xiu, Microstructure, adhesion and tribological properties of CrN/CrTiAlSiN/WCrTiAlN multilayer coatings deposited on nitrocarburized AISI 4140 steel, Surf. Coat. Technol., 2019, 362, p 27–34. https://doi.org/10.1016/j.surfcoat.2019.01.09110.1016/j.surfcoat.2019.01.091 ↗
23. V. Bonu, M. Jeevitha, V. Praveen Kumar and H.C. Barshilia, Nanolayered multilayer Ti/TiN coatings: role of bi-layer thickness and annealing on solid particle erosion behaviour at elevated temperature, Surf. Coat. Technol., 2019, 357, p 204–211. https://doi.org/10.1016/j.surfcoat.2018.10.00710.1016/j.surfcoat.2018.10.007 ↗
24. W. Dai, Q. Wang, K.H. Kim and S.H. Kwon, Al2O3/CrAlSiN multilayer coating deposited using hybrid magnetron sputtering and atomic layer deposition, Ceram. Int., 2019, 45, p 11335–11341. https://doi.org/10.1016/j.ceramint.2019.02.21110.1016/j.ceramint.2019.02.211 ↗
25. A. Vereschaka, S. Grigoriev, V. Tabakov, M. Migranov, N. Sitnikov, F. Milovich and N. Andreev, Influence of the nanostructure of Ti-TiN-(Ti, Al, Cr)N multilayer composite coating on tribological properties and cutting tool life, Tribol. Int., 2020, 150, 106388. https://doi.org/10.1016/j.triboint.2020.10638810.1016/j.triboint.2020.106388 ↗
26. P. Mi and F. Ye, Structure and wear performance of the atmospheric heat-treated HVOF sprayed bimodal WC-co coating, Int. J. Refract. Met. Hard Mater., 2018, 76, p 185–191. https://doi.org/10.1016/j.ijrmhm.2018.06.01010.1016/j.ijrmhm.2018.06.010 ↗
27. D. Xiang, X. Cheng, Y. Xiang, L. Chao, C. Yuan and Z. Ding, Structure and cavitation erosion behavior of HVOF sprayed multi-dimensional WC−10Co4Cr coating, Trans. Nonferr. Met. Soc., 2018, 28, p 487–494. https://doi.org/10.1016/S1003-6326(18)64681-310.1016/S1003-6326(18)64681-3 ↗
28. N. Zhao, Y. Zhao, J. Li, X. Wang, Y. Wei, K. Tang, J. Li, Y. Xu and Y. Fu, Formation mechanism and single abrasive wear of TaC dense ceramic layer on surface of gray cast iron, Ceram. Int., 2019, 45, p 15580–15588. https://doi.org/10.1016/j.ceramint.2019.05.06710.1016/j.ceramint.2019.05.067 ↗
29. X. He, X. Yuan, H. Xu, P. Song, X. Yu, C. Li, T. Huang, Q. Li, K. Lü, J. Feng, J. Lü and J. Lu, Analysis of structure and microhardness of Al2O3-40 wt.% TiO2/NiCoCrAl gradient coating with in-situ needle-like phase reinforcement after high-temperature treatment, Ceram. Int., 2019, 45, p 14546–14554. https://doi.org/10.1016/j.ceramint.2019.04.17110.1016/j.ceramint.2019.04.171 ↗
30. N. Zhao, Y. Xu, W. Zhang, Z. Zhao, L. Zhong and Y. Fu, Gradually varying mechanical properties of in situ synthesized NbC–Fe-graded composite coating, Mater. Sci. Technol. Lond., 2017, 33, p 220–226. https://doi.org/10.1080/02670836.2016.118233910.1080/02670836.2016.1182339 ↗
31. H. Wang, J. Mo, S. Mu, M. Zhang, W. Duan, J. Li and Z. Zhou, Effects of interfacial trapezoidal grooves on the mechanical properties of coatings by laser cladding, Surf. Coat. Technol., 2021, 421, 127425. https://doi.org/10.1016/j.surfcoat.2021.12742510.1016/j.surfcoat.2021.127425 ↗
32. Y. Li, Y. Guan, Z. Zhang and S. Ynag, Enhanced bond strength for micro-arc oxidation coating on magnesium alloy via laser surface microstructuring, Appl. Surf. Sci., 2019, 478, p 866–871. https://doi.org/10.1016/j.apsusc.2019.02.04110.1016/j.apsusc.2019.02.041 ↗
33. P. Chen, X. Xiang, T. Shao, Y. La and J. Li, Effect of triangular texture on the tribological performance of die steel with TiN coatings under lubricated sliding condition, Appl. Surf. Sci., 2016, 389, p 361–368. https://doi.org/10.1016/j.apsusc.2016.07.11910.1016/j.apsusc.2016.07.119 ↗
34. V. Kumar and R. Verma, Effect of GNP and laser-surface texturing on HVOF sprayed WC10Co4Cr coatings for high-wear resistance, Tribol. Int., 2023, 178, 108057. https://doi.org/10.1016/j.triboint.2022.10805710.1016/j.triboint.2022.108057 ↗
35. X. Zhan, Y. Liu, P. Yi, W. Feng, Z. Feng and Y. Jin, Effect of substrate surface texture shapes on the adhesion of plasma-sprayed Ni-based coatings, J. Therm. Spray Technol., 2021, 30, p 270–284. https://doi.org/10.1007/s11666-020-01126-210.1007/s11666-020-01126-2 ↗
36. Y. Huang, M.B. Khamesee and E.T. Peng, A comprehensive analytical model for laser powder-fed additive manufacturing, Addit. Manuf., 2016, 12, p 90–99. https://doi.org/10.1016/j.addma.2016.07.00110.1016/j.addma.2016.07.001 ↗
37. S. Zhou, X. Dai and X. Zeng, Effects of processing parameters on structure of Ni-based WC composite coatings during laser induction hybrid rapid cladding, Appl. Surf. Sci., 2009, 255, p 8494–8500. https://doi.org/10.1016/j.apsusc.2009.05.16110.1016/j.apsusc.2009.05.161 ↗
38. X. Han, C. Li, X. Chen and S. Jia, Numerical simulation and experimental study on the composite process of submerged arc cladding and laser cladding, Surf. Coat. Technol., 2022, 439, 128432. https://doi.org/10.1016/j.surfcoat.2022.12843210.1016/j.surfcoat.2022.128432 ↗
39. Q. Wang, J. Shi, L. Zhang, S. Tsutsumi, J. Feng and N. Ma, Impacts of laser cladding residual stress and material properties of functionally graded layers on titanium alloy sheet, Addit. Manuf., 2020, 35, 101303. https://doi.org/10.1016/j.addma.2020.10130310.1016/j.addma.2020.101303 ↗
40. S. Kou, Welding Metallurgy, Wiley, New Jersey, 2003.
41. C. Li, J. Zhao, X. Chen and X. Han, Quantitative evaluation method for the impact parameters during the process of pulsed laser cladding of Fe60, Appl. Phys. A, 2023, 129, p 93. https://doi.org/10.1007/s00339-022-06362-710.1007/s00339-022-06362-7 ↗