Influence of Powder Size on Microstructure and Wear Resistance of Cold-Sprayed Ti-6Al-4V
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Advanced materials and composites · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. V. Champagne and D. Helfritch, The Unique Abilities of Cold Spray Deposition, Int. Mater. Rev., 2016, 61, p 437–455.10.1080/09506608.2016.1194948 ↗
2. F. Gärtner, T. Stoltenhoff, T. Schmidt and H. Kreye, The Cold Spray Process and its Potential for Industrial Applications, J. Therm. Spray Technol., 2006, 15, p 223–232.10.1361/105996306X108110 ↗
3. T. Schmidt, F. Gärtner, H. Assadi and H. Kreye, Development of a Generalized Parameter Window for Cold Spray Deposition, Acta Mater., 2006, 54, p 729–742.10.1016/j.actamat.2005.10.005 ↗
4. Q. Wang and M.X. Zhang, Review on Recent Research and Development of Cold Spray Technologies, Key Eng. Mater., 2013, 533, p 1–52.10.4028/www.scientific.net/KEM.533.1 ↗
5. T. Schmidt, H. Assadi, F. Gärtner, H. Richter, T. Stoltenhoff, H. Kreye and T. Klassen, From Particle Acceleration to Impact and Bonding in Cold Spraying, J. Therm. Spray Technol., 2009, 18, p 794–808.10.1007/s11666-009-9357-7 ↗
6. X. Yang, T. Meng, Y. Su, R. Xu, Z. Guo, Y. Xu, T. Ma and W. Li, Effect of Initial Microstructure on Performance and Corrosion Behavior of GH4169 Superalloy Joint Produced by Linear Friction Welding, Chin. J. Aeronaut., 2025, 38, 103226.10.1016/j.cja.2024.09.002 ↗
7. Y. Su, X. Yang, T. Meng, D. Wu, R. Xu, H. Xu, W. Li and S. Yin, Effect of Linear Friction Welding Process on Microstructure Evolution, Mechanical Properties and Corrosion Behavior of GH4169 Superalloy, Chin. J. Aeronaut., 2024, 37, p 504–520.10.1016/j.cja.2024.03.039 ↗
8. H. Lee, H. Shin, S. Lee and K. Ko, Effect of Gas Pressure on Al Coatings by Cold Gas Dynamic Spray, Mater. Lett., 2008, 62, p 1579–1581.10.1016/j.matlet.2007.09.026 ↗
9. H. Zhang, J. Zhang, A. Shan, J. Wu and H. Song, Effects of Gas Temperature on Bonding and Deformation Behavior of Cold-Sprayed Ni Particles, Acta Metallurgica Sinica -Chinese Edition-, 2007, 43, p 823–828.
10. W. Wong, E. Irissou, A.N. Ryabinin, J.-G. Legoux and S. Yue, Influence of Helium and Nitrogen Gases on the Properties of Cold Gas Dynamic Sprayed Pure Titanium Coatings, J. Therm. Spray Technol., 2011, 20, p 213–226.10.1007/s11666-010-9568-y ↗
11. P. Sirvent, M.Á. Garrido-Maneiro and P. Poza, Improving Cold Sprayed Ti-6Al-4V Coatings Controlling Processing Parameters: Effect on Microstructure and Scratch Behaviour, Wear, 2023, 532–533, 205075.10.1016/j.wear.2023.205075 ↗
12. K. Binder, J. Gottschalk, M. Kollenda, F. Gärtner and T. Klassen, Influence of Impact Angle and Gas Temperature on Mechanical Properties of Titanium Cold Spray Deposits, J. Therm. Spray Technol., 2011, 20, p 234–242.10.1007/s11666-010-9557-1 ↗
13. S. Yin, X.K. Suo, J.Q. Su, Z.W. Guo, H.L. Liao and X.F. Wang, Effects of Substrate Hardness and Spray Angle on the Deposition Behavior of Cold-Sprayed Ti Particles, J. Therm. Spray Technol., 2014, 23, p 76–83.10.1007/s11666-013-0039-0 ↗
14. D.H.L. Seng, Z. Zhang, Z.-Q. Zhang, T.L. Meng, S.L. Teo, B.H. Tan, Q. Loi and J. Pan, Influence of Spray Angle in Cold Spray Deposition of Ti-6Al-4V Coatings on Al6061-T6 Substrates, Surf. Coat. Technol., 2022, 432, 128068.10.1016/j.surfcoat.2021.128068 ↗
15. D.H.L. Seng, Z. Zhang, Z.-Q. Zhang, T.L. Meng, S.L. Teo, B.H. Tan, Q. Loi, J. Pan and T. Ba, Impact of Spray Angle and Particle Velocity in Cold Sprayed IN718 Coatings, Surf. Coat. Technol., 2023, 466, 129623.10.1016/j.surfcoat.2023.129623 ↗
16. Z. Zhang, T.L. Meng, C.J.J. Lee, F. Wei, T. Ba, Z.-Q. Zhang and J. Pan, Experimental and Numerical Study of Al2219 Powders Deposition on Al2219-T6 Substrate by Cold Spray: Effects of Spray Angle, Traverse Speed, and Standoff Distance, Materials, 2023, 16, 5240.10.3390/ma16155240 ↗
17. W.Y. Li, C. Zhang, X.P. Guo, G. Zhang, H.L. Liao, C.J. Li and C. Coddet, Effect of Standoff Distance on Coating Deposition Characteristics in Cold Spraying, Mater. Des., 2008, 29, p 297–304.10.1016/j.matdes.2007.02.005 ↗
18. W. Żórawski, R. Molak, J. Mądry, J. Sienicki, A. Góral, M. Makrenek, M. Scendo and R. Dobosz, Experimental and Numerical Investigations of Titanium Deposition for Cold Spray Additive Manufacturing as a Function of Standoff Distance, Materials, 2021 https://doi.org/10.3390/ma1419549210.3390/ma14195492 ↗
19. R.G. Neo, K. Wu, S.C. Tan and W. Zhou, Effect of Spray Distance and Powder Feed Rate on Particle Velocity in Cold Spray Processes, Metals, 2022 https://doi.org/10.3390/met1201007510.3390/met12010075 ↗
20. Z. Zhang, T.L. Meng, C.J. Lee, F. Wei, T. Ba, Z.-Q. Zhang and J. Pan, Experimental and Numerical Study of Al2219 Powders Deposition on Al2219-T6 Substrate by Cold Spray: Effects of Spray Angle, Traverse Speed, and Standoff Distance, Materials, 2023 https://doi.org/10.3390/ma1615524010.3390/ma16155240 ↗
21. A.W.-Y. Tan, W. Sun, Y.P. Phang, M. Dai, I. Marinescu, Z. Dong and E. Liu, Effects of Traverse Scanning Speed of Spray Nozzle on the Microstructure and Mechanical Properties of Cold-Sprayed Ti6Al4V Coatings, J. Therm. Spray Technol., 2017, 26, p 1484–1497.10.1007/s11666-017-0619-5 ↗
22. C.W. Ziemian, M.M. Sharma, B.D. Bouffard, T. Nissley and T.J. Eden, Effect of Substrate Surface Roughening and Cold Spray Coating on the Fatigue Life of AA2024 Specimens, Mater. Design (1980–2015), 2014, 54, p 212–221.10.1016/j.matdes.2013.08.061 ↗
23. W. Sun, A.W.Y. Tan, A. Bhowmik, I. Marinescu, X. Song, W. Zhai, F. Li and E. Liu, Deposition Characteristics of Cold Sprayed Inconel 718 Particles on Inconel 718 Substrates with Different Surface Conditions, Mater. Sci. Eng. A, 2018, 720, p 75–84.10.1016/j.msea.2018.02.059 ↗
24. W. Sun, A.W.Y. Tan, N.W. Khun, I. Marinescu and E. Liu, Effect of Substrate Surface Condition on Fatigue Behavior of Cold Sprayed Ti6Al4V Coatings, Surf. Coat. Technol., 2017, 320, p 452–457.10.1016/j.surfcoat.2016.11.093 ↗
25. S. Yin, P. Cavaliere, B. Aldwell, R. Jenkins, H. Liao, W. Li and R. Lupoi, Cold Spray Additive Manufacturing and Repair: Fundamentals and Applications, Addit. Manuf., 2018, 21, p 628–650.
26. W. Wong, P. Vo, E. Irissou, A.N. Ryabinin, J.G. Legoux and S. Yue, Effect of Particle Morphology and Size Distribution on Cold-Sprayed Pure Titanium Coatings, J. Therm. Spray Technol., 2013, 22, p 1140–1153.10.1007/s11666-013-9951-6 ↗
27. L. Feng, D. Li, G. An, G. Wang, W. Li and J. Chang, Effect of Powder Particle size on Microstructure and Properties of Low Pressure Cold Sprayed High Aluminium Bronze Coating, Mater. Res. Express, 2020, 7, 026524.10.1088/2053-1591/ab6fac ↗
28. F. Taherkhani, A. List, S. Keller, N. Kashaev, F. Gärtner and T. Klassen, The Influence of Spraying Parameters and Powder Sizes on the Microstructure and Mechanical Behavior of Cold-Sprayed Inconel®625 Deposits, J. Therm. Spray Technol., 2024 https://doi.org/10.1007/s11666-024-01712-810.1007/s11666-024-01712-8 ↗
29. L.N. Brewer, J.F. Schiel, E.S.K. Menon and D.J. Woo, The Connections Between Powder Variability and Coating Microstructures for Cold Spray Deposition of Austenitic Stainless Steel, Surf. Coat. Technol., 2018, 334, p 50–60.10.1016/j.surfcoat.2017.10.082 ↗
30. V.N.V. Munagala, S. Bessette, R. Gauvin, R.R. Chromik, Sliding wear of cold sprayed Ti6Al4V coatings: Effect of porosity and normal load, Wear, 450 (2020).10.1016/j.wear.2020.203268 ↗
31. M.R. Rokni, C.A. Widener, V.K. Champagne, G.A. Crawford and S.R. Nutt, The Effects of Heat Treatment on 7075 Al Cold Spray Deposits, Surf. Coat. Technol., 2017, 310, p 278–285.10.1016/j.surfcoat.2016.10.064 ↗
32. C.J. Williamson, A.R. Webb, L.N. Brewer, P.G. Allison and J.B. Jordon, Effect of Powder Heat Treatment on Fatigue Mechanisms of Freestanding AA7075 Cold Spray Deposits, Int. J. Fatigue, 2023 https://doi.org/10.1016/j.ijfatigue.2022.10725610.1016/j.ijfatigue.2022.107256 ↗
33. V.S. Bhattiprolu, K.W. Johnson, O.C. Ozdemir and G.A. Crawford, Influence of Feedstock Powder and Cold Spray Processing Parameters on Microstructure and Mechanical Properties of Ti-6Al-4V cold Spray Depositions, Surf. Coat. Technol., 2018, 335, p 1–12.10.1016/j.surfcoat.2017.12.014 ↗
34. V.S. Bhattiprolu, K.W. Johnson and G.A. Crawford, Influence of Powder Microstructure on the Microstructural Evolution of As-sprayed and Heat Treated Cold-Sprayed Ti-6Al-4V Coatings, J. Therm. Spray Technol., 2019, 28, p 174–188.10.1007/s11666-018-0812-1 ↗
35. V.N.V. Munagala, V. Akinyi, P. Vo and R.R. Chromik, Influence of Powder Morphology and Microstructure on the Cold Spray and Mechanical Properties of Ti6Al4V Coatings, J. Therm. Spray Technol., 2018, 27, p 827–842.10.1007/s11666-018-0729-8 ↗
36. P.C. King and M. Jahedi, Relationship Between Particle Size and Deformation in the Cold Spray Process, Appl. Surf. Sci., 2010, 256, p 1735–1738.10.1016/j.apsusc.2009.09.104 ↗
37. S. Chandra, C. Wang, S.B. Tor, U. Ramamurty and X. Tan, Powder-Size Driven Facile Microstructure Control in Powder-Fusion Metal Additive Manufacturing Processes, Nat. Commun., 2024, 15, 3094.10.1038/s41467-024-47257-w ↗
38. D. Helfritch, V. Champagne Jr, A Model Study of Powder Particle Size Effects in Cold Spray Deposition, 6, (2008).
39. R.R. Boyer, An Overview on the Use of Titanium in the Aerospace Industry, Mater. Sci. Eng. A, 1996, 213, p 103–114.10.1016/0921-5093(96)10233-1 ↗
40. M. Peters, J. Kumpfert, C.H. Ward and C. Leyens, Titanium Alloys for Aerospace Applications, Adv. Eng. Mater., 2003, 5, p 419–427.10.1002/adem.200310095 ↗
41. I.V. Gorynin, Titanium Alloys for Marine Application, Mater. Sci. Eng. A, 1999, 263, p 112–116.10.1016/S0921-5093(98)01180-0 ↗
42. A.S. Oryshchenko, I.V. Gorynin, V.P. Leonov, A.S. Kudryavtsev, V.I. Mikhailov and E.V. Chudakov, Marine Titanium Alloys: Present and Future, Inorg. Mater. Appl. Res., 2015, 6, p 571–579.10.1134/S2075113315060106 ↗
43. K. Faller and F.H. Froes, The Use of Titanium in Family Automobiles: Current Trends, JOM, 2001, 53, p 27–28.10.1007/s11837-001-0143-3 ↗
44. C.N. Elias, J.H.C. Lima, R. Valiev and M.A. Meyers, Biomedical Applications of Titanium and its Alloys, JOM, 2008, 60, p 46–49.10.1007/s11837-008-0031-1 ↗
45. H.J. Rack and J.I. Qazi, Titanium Alloys for Biomedical Applications, Mater. Sci. Eng. C, Mater. Biol. Interact., 2006, 26, p 1269–1277.10.1016/j.msec.2005.08.032 ↗
46. N. Poondla, T.S. Srivatsan, A. Patnaik and M. Petraroli, A Study of the Microstructure and Hardness of Two Titanium Alloys: Commercially Pure and Ti–6Al–4V, J. Alloys Compd., 2009, 486, p 162–167.10.1016/j.jallcom.2009.06.172 ↗
47. X.-T. Luo, Y.-K. Wei, Y. Wang and C.-J. Li, Microstructure and Mechanical Property of Ti and Ti6Al4V Prepared by an In-situ Shot Peening Assisted Cold Spraying, Mater. Des., 2015, 85, p 527–533.10.1016/j.matdes.2015.07.015 ↗
48. D.K. Christoulis, S. Guetta, V. Guipont and M. Jeandin, The Influence of the Substrate on the Deposition of Cold-Sprayed Titanium: An Experimental and Numerical Study, J. Therm. Spray Technol., 2011, 20, p 523–533.10.1007/s11666-010-9608-7 ↗
49. W. Wong, A. Rezaeian, E. Irissou, J.G. Legoux and S. Yue, Cold Spray Characteristics of Commercially Pure Ti and Ti-6Al-4V, Adv. Mater. Res., 2010, 89–91, p 639–644.10.4028/www.scientific.net/AMR.89-91.639 ↗
50. W.Y. Li, C. Zhang, X.P. Guo, J.L. Xu, C.J. Li, H.L. Liao, C. Cocidet and K.A. Khor, Ti and Ti-6Al-4V Coatings by Cold Spraying and Microstructure Modification by Heat Treatment, Adv. Eng. Mater., 2007, 9, p 418–423.10.1002/adem.200700022 ↗
51. J.Y. Lek, A. Bhowmik, A.W.-Y. Tan, W. Sun, X. Song, W. Zhai, P.J. Buenconsejo, F. Li, E. Liu, Y.M. Lam and C.B. Boothroyd, Understanding the Microstructural Evolution of Cold Sprayed Ti-6Al-4V Coatings on Ti-6Al-4V Substrates, Appl. Surf. Sci., 2018, 459, p 492–504.10.1016/j.apsusc.2018.07.175 ↗
52. N. Maharjan, A. Bhowmik, C. Kum, J. Hu, Y. Yang and W. Zhou, Post-Processing of Cold Sprayed Ti-6Al-4V Coatings by Mechanical Peening, Metals, 2021, 11, p 1038.10.3390/met11071038 ↗
53. A.W.-Y. Tan, W. Sun, A. Bhowmik, J.Y. Lek, I. Marinescu, F. Li, N.W. Khun, Z. Dong and E. Liu, Effect of Coating Thickness on Microstructure, Mechanical Properties and fracture Behaviour of Cold Sprayed Ti6Al4V Coatings on Ti6Al4V Substrates, Surf. Coat. Technol., 2018, 349, p 303–317.10.1016/j.surfcoat.2018.05.060 ↗
54. C.-J. Li and W.-Y. Li, Deposition Characteristics of Titanium Coating in Cold Spraying, Surf. Coat. Technol., 2003, 167, p 278–283.10.1016/S0257-8972(02)00919-2 ↗
55. D. Goldbaum, J.M. Shockley, R.R. Chromik, A. Rezaeian, S. Yue, J.-G. Legoux and E. Irissou, The Effect of Deposition Conditions on Adhesion Strength of Ti and Ti6Al4V Cold Spray Splats, J. Therm. Spray Technol., 2012, 21, p 288–303.10.1007/s11666-011-9720-3 ↗
56. I. Chaban, Y. Sun, D. Veysset, K.A. Nelson and C.A. Schuh, The Effect of Substrate Temperature on the Critical Velocity in Microparticle Impact Bonding, Appl. Phys. Lett., 2021 https://doi.org/10.1063/5.005527410.1063/5.0055274 ↗
57. N.W. Khun, A.W.Y. Tan, K.J.W. Bi and E. Liu, Effects of Working Gas on Wear and Corrosion Resistances of Cold Sprayed Ti-6Al-4V Coatings, Surf. Coat. Technol., 2016, 302, p 1–12.10.1016/j.surfcoat.2016.05.052 ↗
58. N.W. Khun, A.W.Y. Tan, W. Sun and E. Liu, Wear and Corrosion Resistance of Thick Ti-6Al-4V Coating Deposited on Ti-6Al-4V Substrate via High-Pressure Cold Spray, J. Therm. Spray Technol., 2017, 26, p 1393–1407.10.1007/s11666-017-0588-8 ↗
59. S. Msolli, Z.-Q. Zhang, D.H.L. Seng, Z. Zhang, J. Guo, C.D. Reddy, N. Sridhar, J. Pan, B.H. Tan and Q. Loi, An Experimentally Validated Dislocation Density Based Computational Framework for Predicting Microstructural Evolution in Cold Spray Process, Int. J. Solids Struct., 2021, 225, 111065.10.1016/j.ijsolstr.2021.111065 ↗
60. W. Li, K. Yang, D. Zhang and X. Zhou, Residual Stress Analysis of Cold-Sprayed Copper Coatings by Numerical Simulation, J. Therm. Spray Technol., 2016, 25, p 131–142.10.1007/s11666-015-0308-1 ↗
61. Z. Zhang, H.L.D. Seng, M. Lin, S.L. Teo, T.L. Meng, J.J.C. Lee, Z.-Q. Zhang, T. Ba, J. Guo, K. Sundaravadivelu, P.K. Aw and J. Pan, Cold Spray Deposition of Inconel 718 in Comparison with Atmospheric Plasma Spray Deposition, Appl. Surf. Sci., 2021, 535, 147704.10.1016/j.apsusc.2020.147704 ↗
62. N.W. Khun, A.W.Y. Tan and E. Liu, Mechanical and Tribological Properties of Cold-Sprayed Ti Coatings on Ti-6Al-4V Substrates, J. Therm. Spray Technol., 2016, 25, p 715–724.10.1007/s11666-016-0396-6 ↗