Heavy Oil Corrosion Fouling of Ni-Based Alloy and Co-Based Thermal Sprayed Coatings
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Petroleum Processing and Analysis · Corrosion Behavior and Inhibition · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (85)
Show source-provided references
1. W. Wang and A. P. Watkinson, “Iron Sulphide and Coke Fouling from Sour Oils: Review and Initial Experiments,” in Proceedings of the International Conference on Heat Exchanger Fouling and Cleaning, Crete Island, Greece, 2011, pp. 23-30.
2. U.B. Deshannava, M.S. Rafeen, M. Ramasamy, and D. Subbarao, Crude Oil Fouling: A Review, J. Appl. Sci., 2010, 10(24), p 3167-3174. https://doi.org/10.3923/jas.2010.3167.317410.3923/jas.2010.3167.3174 ↗
3. F. Coletti, B. D. Crittenden, and S. Macchietto, “Basic Science of the Fouling Process,” in Crude Oil Fouling, Elsevier, 2015, pp. 23-50. https://doi.org/10.1016/B978-0-12-801256-7.00002-6.10.1016/B978-0-12-801256-7.00002-6 ↗
4. I. M. Cozzarelli and A. L. Baehr, “Volatile Fuel Hydrocarbons and MTBE in the Environment,” in Treatise on Geochemistry, Elsevier, 2003, pp. 433-474. https://doi.org/10.1016/B0-08-043751-6/09054-X.10.1016/B0-08-043751-6/09054-X ↗
5. T. Tavassoli, S.M. Mousavi, S.A. Shojaosadati, and H. Salehizadeh, Asphaltene Biodegradation Using Microorganisms Isolated from Oil Samples, Fuel, 2012, 93, p 142-148. https://doi.org/10.1016/j.fuel.2011.10.02110.1016/j.fuel.2011.10.021 ↗
6. W. Wang and A. P. Watkinson, “Deposition from a Sour Heavy Oil Under Incipient Coking Conditions: Wall Shear Stress Effects and Mechanism,” in Proceedings of International Conference on Heat Exchanger Fouling and Cleaning, Enfield (Dublin), Ireland, 2015, pp. 65-73.
7. J. G. Speight, Oil and Gas Corrosion Prevention: From Surface Facilities to Refineries. The Boulevard, Langford Lane, Kidlington, Oxford,: Gulf Professional Publishing [Imprint] Elsevier Science & Technology Books., 2014. Accessed: May 22, 2020. [Online]. Available: http://app.knovel.com/hotlink/toc/id:kpOGCPFSF8/oil-and-gas10.1016/B978-0-12-800346-6.00012-0 ↗
8. A. Groysman, Corrosion Problems and Solutions in Oil Refining and Petrochemical Industry, 1st ed. 2017. in Topics in Safety, Risk, Reliability and Quality, no. 32. Cham: Springer International Publishing: Imprint: Springer, 2017. https://doi.org/10.1007/978-3-319-45256-210.1007/978-3-319-45256-2 ↗
9. R.B. Rebak, Sulfidic corrosion in refineries – a review, Corros. Rev., 2011 https://doi.org/10.1515/CORRREV.2011.02110.1515/CORRREV.2011.021 ↗
10. K. Wu, X. Li, C. Wang, W. Yu, and Z. Chen, Model for Surface Diffusion of Adsorbed Gas in Nanopores of Shale Gas Reservoirs, Ind. Eng. Chem. Res., 2015, 54(12), p 3225-3236. https://doi.org/10.1021/ie504030v10.1021/ie504030v ↗
11. S. Ebrahimi, J.S. Moghaddas, and M.K.R. Aghjeh, Study on Thermal Cracking Behavior of Petroleum Residue, Fuel, 2008, 87(8-9), p 1623-1627. https://doi.org/10.1016/j.fuel.2007.08.01510.1016/j.fuel.2007.08.015 ↗
12. A.E. Hughes, J.M.C. Mol, M.L. Zheludkevich, and R.G. Buchneit, Active protective coatings, Springer, Berlin, 2016.10.1007/978-94-017-7540-3 ↗
13. D.E. Coates and A.D. Dalvi, An Extension of the Wagner Theory of Alloy Oxidation and Sulfidation, Oxid. Met., 1970, 2(4), p 331-347. https://doi.org/10.1007/BF0060447410.1007/BF00604474 ↗
14. P. Cavaliere, G. Zavarise, and M. Perillo, Modeling of the Carburizing and Nitriding Processes, Comput. Mater. Sci., 2009, 46(1), p 26-35. https://doi.org/10.1016/j.commatsci.2009.01.02410.1016/j.commatsci.2009.01.024 ↗
15. D.J. Young, Chapter 8 - Corrosion by Sulphur, High Temperature Oxidation and Corrosion of Metals (Second Edition). D.J. Young Ed., Elsevier, Amsterdam, 2016, p 393-43010.1016/B978-0-08-100101-1.00008-X ↗
16. W. Wang and A.P. Watkinson, Deposition from a Sour Heavy Oil Under Incipient Coking Conditions: Effect of Surface Materials and Temperature, Heat Transf. Eng., 2015, 36(7-8), p 623-631. https://doi.org/10.1080/01457632.2015.95491410.1080/01457632.2015.954914 ↗
17. M. Hazelton, T. Stephenson, J. Lepore, V. Subramani, and D. Mitlin, Sulfide Promoted Chronic Fouling in a Refinery: A Broad Phenomenon Spanning a Range of Heat Transfer Surfaces and Oil Types, Fuel, 2015, 160, p 479-489. https://doi.org/10.1016/j.fuel.2015.07.07410.1016/j.fuel.2015.07.074 ↗
18. D.J. Young, Chapter 3 - Oxidation of Pure Metals, High Temperature Oxidation and Corrosion of Metals (Second Edition). D.J. Young Ed., Elsevier, Amsterdam, 2016, p 85-14410.1016/B978-0-08-100101-1.00003-0 ↗
19. R.C. Reed, T. Tao, and N. Warnken, Alloys-by-Design: Application to Nickel-Based Single Crystal Superalloys, Acta Mater., 2009, 57(19), p 5898-5913. https://doi.org/10.1016/j.actamat.2009.08.01810.1016/j.actamat.2009.08.018 ↗
20. S. Kumar, B. Satapathy, D. Pradhan, and G.S. Mahobia, Effect of Surface Modification on the Hot Corrosion Resistance of Inconel 718 at 700 °C, Mater. Res. Express, 2019, 6(8), 086549. https://doi.org/10.1088/2053-1591/ab1dc710.1088/2053-1591/ab1dc7 ↗
21. J. R. Davis and ASM International, Eds., Nickel, cobalt, and their alloys. in ASM specialty handbook. ASM International, Materials Park, 2000.
22. A.-R. Boukantar, B. Djerdjare, F. Guiberteau, and A.L. Ortiz, Spark Plasma Sinterability and Dry Sliding-Wear Resistance of WC Densified with Co, Co+Ni, and Co+Ni+Cr, Int. J. Refract. Met. Hard Mater., 2020, 92, 105280. https://doi.org/10.1016/j.ijrmhm.2020.10528010.1016/j.ijrmhm.2020.105280 ↗
23. J. García, V. Collado Ciprés, A. Blomqvist, and B. Kaplan, Cemented Carbide Microstructures: A Review, Int. J. Refract. Met. Hard Mater., 2019, 80, p 40-68. https://doi.org/10.1016/j.ijrmhm.2018.12.00410.1016/j.ijrmhm.2018.12.004 ↗
24. S. Soltanattar, High Temperature Corrosion Behavior of Alloys in Mixed-Gas Environments, University of Pittsburgh, Swanson School of Engineering, 2018.
25. B. Fotovvati, N. Namdari, and A. Dehghanghadikolaei, On Coating Techniques for Surface Protection: A Review, J. Manuf. Mater. Process., 2019, 3(1), Art. no. 1. https://doi.org/10.3390/jmmp301002810.3390/jmmp3010028 ↗
26. M. Oksa, E. Turunen, T. Suhonen, T. Varis, and S.-P. Hannula, Optimization and Characterization of High Velocity Oxy-fuel Sprayed Coatings: Techniques, Materials, and Applications, Coatings, 2011, 1(1), p 17-52. https://doi.org/10.3390/coatings101001710.3390/coatings1010017 ↗
27. T.S. Sidhu, S. Prakash, and R.D. Agrawal, Studies of the Metallurgical and Mechanical Properties of High Velocity Oxy-Fuel Sprayed Stellite-6 Coatings on Ni- and Fe-Based Superalloys, Surf. Coat. Technol., 2006, 201(1), p 273-281. https://doi.org/10.1016/j.surfcoat.2005.11.10810.1016/j.surfcoat.2005.11.108 ↗
28. Š Houdková, E. Smazalová, and Z. Pala, Effect of Heat Treatment on the Microstructure and Properties of HVOF-Sprayed Co-Cr-W Coating, J. Therm. Spray Tech., 2016, 25(3), p 546-557. https://doi.org/10.1007/s11666-015-0365-510.1007/s11666-015-0365-5 ↗
29. Q. Liu, Z. Luo, M. He, T. Wei, and S. Wang, On the Corrosion of Additively Manufactured Inconel 718 with Different Crystallographic Orientations Exposed to 3.5% NaCl, Addit. Manuf., 2024, 92, 104366. https://doi.org/10.1016/j.addma.2024.10436610.1016/j.addma.2024.104366 ↗
30. G. Kasperovich, J. Gussone, G. Requena, N. Schell, A. Stark, and J. Haubrich, Tailoring the Strength of Inconel 718: Insights into LPBF Parameters and Heat Treatment Synergy, Mater. Des., 2025, 250, 113627. https://doi.org/10.1016/j.matdes.2025.11362710.1016/j.matdes.2025.113627 ↗
31. U. Harish et al., Effect of cobalt variation on microstructural and erosion performance of HVOF-sprayed WC-Co-Cr-Ni hard-faced coatings, J Mater. Sci: Mater Eng., 2025, 20(1), p 73. https://doi.org/10.1186/s40712-025-00264-110.1186/s40712-025-00264-1 ↗
32. V. Lakkannavar, K.B. Yogesha, C.D. Prasad, M. Mruthunjaya, and R. Suresh, A Review on Tribological and Corrosion Behaviour of Thermal Spray Coatings, J. Inst. Eng. India Ser. D, 2025, 106(1), p 753-769. https://doi.org/10.1007/s40033-024-00636-510.1007/s40033-024-00636-5 ↗
33. S. Hong et al., Effect of Spray Parameters on the Corrosion Behavior of HVOF Sprayed WC-Co-Cr Coatings, J. of Mater. Eng. Perform., 2014, 23(4), p 1434-1439. https://doi.org/10.1007/s11665-014-0865-310.1007/s11665-014-0865-3 ↗
34. T. Varis, T. Suhonen, M. Jokipii, and P. Vuoristo, Influence of Powder Properties on Residual Stresses Formed in High-Pressure Liquid fuel HVOF Sprayed WC-CoCr Coatings, Surf. Coat. Technol., 2020, 388, 125604. https://doi.org/10.1016/j.surfcoat.2020.12560410.1016/j.surfcoat.2020.125604 ↗
35. X. Gong et al., The Dominant Role of Surface Chemistry on Coking Resistance of Passivating Coating, Appl. Energy, 2023, 352, 121929. https://doi.org/10.1016/j.apenergy.2023.12192910.1016/j.apenergy.2023.121929 ↗
36. D. Nečas and P. Klapetek, Gwyddion: An Open-Source Software for SPM Data Analysis, Open Phys., 2012, 10(1), p 181-188. https://doi.org/10.2478/s11534-011-0096-210.2478/s11534-011-0096-2 ↗
37. K. Kanaya and S. Okayama, Penetration and Energy-Loss Theory of Electrons in Solid Targets, J. Phys. D Appl. Phys., 1972, 5(1), p 43-58. https://doi.org/10.1088/0022-3727/5/1/30810.1088/0022-3727/5/1/308 ↗
38. D. Wilson, G. Polley, and S. Pugh, “Ten Years of Ebert, Panchal and the ‘Threshold Fouling’ Concept,” Heat Exchanger Fouling and Cleaning - Challenges and Opportunities, p. 25, 2005.
39. D.I. Wilson, E.M. Ishiyama, and G.T. Polley, Twenty Years of Ebert and Panchal—What Next?, Heat Transf. Eng., 2017, 38(7-8), p 669-680. https://doi.org/10.1080/01457632.2016.120640710.1080/01457632.2016.1206407 ↗
40. H. Rezaei, X. Liu, S.J. Ardakani, K.J. Smith, and M. Bricker, A Study of Cold Lake Vacuum Residue Hydroconversion in Batch and Semi-Batch Reactors Using Unsupported MoS2 Catalysts, Catal. Today, 2010, 150(3), p 244-254. https://doi.org/10.1016/j.cattod.2009.10.00510.1016/j.cattod.2009.10.005 ↗
41. F.S. Rocha, E. Bousser, M. Azzi, F. Khelfaoui, L. Vernhes, G.S. Patience, J.E. Klemberg-Sapieha, and L. Martinu, Alumina Coatings on Ni-based Superalloys: The Impact of Annealing on Heavy Oil Fouling, Surf. Coat. Technol., 2024, 493, 131266. https://doi.org/10.1016/j.surfcoat.2024.13126610.1016/j.surfcoat.2024.131266 ↗
42. F.S. Rocha, P.R.T. Avila, O. Toure, M. Azzi, F. Khelfaoui, L. Vernhes, G.S. Patience, J.E. Klemberg-Sapieha, and L. Martinu, Enhanced Heavy Oil Fouling Resistance of Cobalt-Based Spray-Deposited Coatings by Alloy Design and Heat Treatment, Surf. Coat. Technol., 2025, 495, 131528. https://doi.org/10.1016/j.surfcoat.2024.13152810.1016/j.surfcoat.2024.131528 ↗
43. P. Wang, B. Hu, X. Huang, and C. Zheng, Thermodynamic Assessment of the Co-Cr-Ni, Co-Cr-W and Co-Ni-W, Calphad, 2021, 73, 102252. https://doi.org/10.1016/j.calphad.2021.10225210.1016/j.calphad.2021.102252 ↗
44. G. Cui, H. Liu, S. Li, G. Gao, M. Hassani, and Z. Kou, Effect of Ni, W and Mo on the Microstructure, Phases and High-temperature Sliding Wear Performance of CoCr Matrix Alloys, Sci. Technol. Adv. Mater., 2020, 21(1), p 229-241. https://doi.org/10.1080/14686996.2020.175211310.1080/14686996.2020.1752113 ↗
45. V. Kuzucu, M. Ceylan, H. Çelik, and İ Aksoy, Phase Investigation of a Cobalt Base Alloy Containing Cr, Ni, W and C, J. Mater. Process. Technol., 1998, 74(1), p 137-141. https://doi.org/10.1016/S0924-0136(97)00261-610.1016/S0924-0136(97)00261-6 ↗
46. J. Chen et al., Superhydrophobic Surfaces Cannot Reduce Ice Adhesion, Appl. Phys. Lett., 2012, 101(11), 111603. https://doi.org/10.1063/1.475243610.1063/1.4752436 ↗
47. E.A. Blekkan and A. Holmen, Coke Formation on Metal Foils from Heavy Oils, Carbon, 1987, 25(6), p 827-835. https://doi.org/10.1016/0008-6223(87)90158-810.1016/0008-6223(87)90158-8 ↗
48. A.K. Halvey, B. Macdonald, A. Dhyani, and A. Tuteja, Design of Surfaces for Controlling Hard and Soft Fouling, Phil. Trans. R. Soc. A, 2019, 377(2138), p 20180266. https://doi.org/10.1098/rsta.2018.026610.1098/rsta.2018.0266 ↗
49. F.S. Rocha, P.R.T. Avila, F. Khelfaoui, L. Vernhes, G.S. Patience, J.E. Klemberg-Sapieha, and L. Martinu, Reactively Sputtered Coatings for the Protection of a Nickel-Based Alloy Against Heavy Oil Corrosion Fouling, J. Vac. Sci. Technol. A, 2025, 43(3), 033106. https://doi.org/10.1116/6.000434310.1116/6.0004343 ↗
50. A. Rawat, S. Dhakla, S.K. Maity, and P. Lama, An Inclusive Experimental and Kinetic Understanding of the Slurry Phase Hydroprocessing of Crude Oil with an Active Dispersed Catalyst to Obtain Refined Fuel, J. Anal. Appl. Pyrolysis, 2024, 184, p 106834. https://doi.org/10.1016/j.jaap.2024.10683410.1016/j.jaap.2024.106834 ↗
51. D.J. Young, Chapter 4 - Mixed Gas Corrosion of Pure Metals, High Temperature Oxidation and Corrosion of Metals (Second Edition). D.J. Young Ed., Elsevier, Amsterdam, 2016, p 145-19110.1016/B978-0-08-100101-1.00004-2 ↗
52. Kh.A. Al-hatab, M.A. Al-bukhaiti, U. Krupp, and M. Kantehm, Cyclic Oxidation Behavior of IN 718 Superalloy in Air at High Temperatures, Oxid. Met., 2011, 75(3), p 209-228. https://doi.org/10.1007/s11085-010-9230-610.1007/s11085-010-9230-6 ↗
53. S.K. Verma, D.P. Whittle, and J. Stringer, Sulphidation of Cobalt-Based Alloys, Corros. Sci., 1972, 12(7), p 545-554. https://doi.org/10.1016/S0010-938X(72)90063-710.1016/S0010-938X(72)90063-7 ↗
54. I. Gurrappa, I.V.S. Yashwanth, and J.S. Burnell-Gray, Sulfidation Characteristics of an Advanced Superalloy and Comparison with Other Superalloys Intended for Gas Turbine Use, Metall. Mat. Trans. A, 2013, 44(11), p 5270-5280. https://doi.org/10.1007/s11661-013-1859-810.1007/s11661-013-1859-8 ↗
55. S. Mrowec, On the Mechanism of High Temperature Oxidation of Metals and Alloys, Corros. Sci., 1967, 7(9), p 563-578. https://doi.org/10.1016/0010-938X(67)80033-710.1016/0010-938X(67)80033-7 ↗
56. A. Brückman, The Mechanism of Transport of Matter Through the Scales During Oxidation of Metals and Alloys, Corros. Sci., 1967, 7(1), p 51-59. https://doi.org/10.1016/S0010-938X(67)80069-610.1016/S0010-938X(67)80069-6 ↗
57. B. Gleeson, Alloy Degradation Under Oxidizing-Sulfidizing Conditions at Elevated Temperatures, Mater. Res., 2004, 7(1), p 61-69. https://doi.org/10.1590/S1516-1439200400010001010.1590/S1516-14392004000100010 ↗
58. M.W.J. Chase, NIST-JANAF thermochemical tables, monograph 9, Journal of Physical and Chemical Reference Data, Vol 9, 4th ed. American Chemical Society, Washington, 1998, p 1-1951
59. R.D. Holmes, H. St, C. O’Neill, and R.J. Arculus, Standard Gibbs Free Energy of Formation for Cu2O, NiO, CoO, and FexO: High Resolution Electrochemical Measurements Using Zirconia Solid Electrolytes from 900 to 1400 K, Geochim. Cosmochim. Acta, 1986, 50(11), p 2439-2452. https://doi.org/10.1016/0016-7037(86)90027-X10.1016/0016-7037(86)90027-X ↗
60. “Synthesis of Ti,Cr,Mn,Fe,Co,Ni,Cu,Zn sulfide by solid-gas reactions,investigation of structural and conducting properties,” Master of Science, Middle East Technical university, 2005.
61. H.J.T. Elligham, Transactions and Communications, J. Soc. Chem. Ind., 1944, 63(5), p 125-160. https://doi.org/10.1002/jctb.500063050110.1002/jctb.5000630501 ↗
62. Y. Zhang, H. Wang, and X.-G. Lu, Diffusion Coefficients of the Ni-Co-Fe Alloys Studied by Molecular Dynamics Simulation and CALPHAD Assessment, J. Phase Equilib. Diffus., 2024, 45(6), p 1068-1078. https://doi.org/10.1007/s11669-024-01143-610.1007/s11669-024-01143-6 ↗
63. D. Coutsouradis, A. Davin, and M. Lamberigts, Cobalt-Based Superalloys for Applications in Gas Turbines, Mater. Sci. Eng., 1987, 88, p 11-19. https://doi.org/10.1016/0025-5416(87)90061-910.1016/0025-5416(87)90061-9 ↗
64. K. Gjønnes and A. Andersen, Scale Structures During Oxidation and Sulphidation of Nickel and a Nickel-Chromium Alloy, Ultramicroscopy, 1987, 22(1), p 289-295. https://doi.org/10.1016/0304-3991(87)90072-610.1016/0304-3991(87)90072-6 ↗
65. C. Mapelli et al., Comparison of the Combined Oxidation and Sulphidation Behavior of Nickel- and Cobalt-Based Alloys at High Temperature, J. Mater. Res. Technol., 2020, 9(6), p 15679-15692. https://doi.org/10.1016/j.jmrt.2020.11.00910.1016/j.jmrt.2020.11.009 ↗
66. T. Pehlke, “Studies of Aqueous Hydrogen Sulfide Corrosion in Producing SAGD Wells,” Society of Petroleum Engineers, Banff, Alberta, Canada, 2017. Accessed: Jun. 17, 2020. [Online]. Available: http://www.onepetro.org/doi/https://doi.org/10.2118/188161-MS10.2118/188161-MS ↗
67. R.A. King, Sulfide Stress Cracking, Trends in Oil and Gas Corrosion Research and Technologies, Woodhead Publishing Series in Energy. A.M. El-Sherik Ed., Woodhead Publishing, Boston, 2017, p 271-294
68. K.N. Strafford, The Sulphidation of Metals and Alloys, Metall. Rev., 1969, 14(1), p 153-174. https://doi.org/10.1179/mtlr.1969.14.1.15310.1179/mtlr.1969.14.1.153 ↗
69. W. Keogh et al., Deposition of Inorganic Carbonate, Sulfate, and Sulfide Scales on Antifouling Surfaces in Multiphase Flow, Energy Fuels, 2017, 31(11), p 11838-11851. https://doi.org/10.1021/acs.energyfuels.7b0216510.1021/acs.energyfuels.7b02165 ↗
70. T. Liu, T. Jiang, J. Zhong, K. Guan, Z. Wang, and F. Arjmand, Failure Analysis of Sulphidation-Oxidation Corrosion of Incoloy 800HT Superheater Tube, Eng. Fail. Anal., 2022, 142, 106798. https://doi.org/10.1016/j.engfailanal.2022.10679810.1016/j.engfailanal.2022.106798 ↗
71. S.N. Kazi, Fouling and Fouling Mitigation on Heat Exchanger Surfaces, Heat Exchang. - Basics Des. Appl., 2012 https://doi.org/10.5772/3299010.5772/32990 ↗
72. J. Wang, H. Xue, Y. Zhao, T. Zhang, and F. Wang, Effect of Surface Roughness on the Corrosion of HP-13Cr Stainless Steel in the Dynamic Aggressive Oilfield Environment, Metals, 2024 https://doi.org/10.3390/met1403028010.3390/met14030280 ↗
73. M.A. Islam and Z. Farhat, Erosion-Corrosion Mechanism and Comparison of Erosion-Corrosion Performance of API Steels, Wear, 2017, 376-377, p 533-541. https://doi.org/10.1016/j.wear.2016.12.05810.1016/j.wear.2016.12.058 ↗
74. M. Krzyzanowski and J.H. Beynon, Chapter 13 - Oxide Behaviour in Hot Rolling, Metal Forming Science and Practice. J.G. Lenard Ed., Elsevier Science Ltd, Oxford, 2002, p 259-29510.1016/B978-008044024-8/50013-8 ↗
75. J. Yang, S. Wang, J. Wang, and X. Tang, Effect of High Flow Velocity on Corrosion Behavior of Ni Based and Ni-Fe Based Alloys in Supercritical Water Oxidation Environment, J. Supercrit. Fluids, 2021, 170, 105126. https://doi.org/10.1016/j.supflu.2020.10512610.1016/j.supflu.2020.105126 ↗
76. Y. Zhao et al., Investigation of the Rotation Speed on Corrosion Behavior of HP-13Cr Stainless Steel in the Extremely Aggressive Oilfield Environment by Using the Rotating Cage Test, Corros. Sci., 2018, 145, p 307-319. https://doi.org/10.1016/j.corsci.2018.10.01110.1016/j.corsci.2018.10.011 ↗
77. D.J. Young, Chapter 2 - Enabling Theory, High Temperature Oxidation and Corrosion of Metals (Second Edition). D.J. Young Ed., Elsevier, Amsterdam, 2016, p 31-8410.1016/B978-0-08-100101-1.00002-9 ↗
78. T.O. Dembaremba, S. Majodina, R.S. Walmsley, A.S. Ogunlaja, and Z.R. Tshentu, Perspectives on Strategies for Improving Ultra-Deep Desulfurization of Liquid Fuels Through Hydrotreatment: Catalyst Improvement and Feedstock Pre-treatment, Front. Chem., 2022 https://doi.org/10.3389/fchem.2022.80722510.3389/fchem.2022.807225 ↗
79. J. Lu et al., Failure Analysis for a Dry-Pulverized Coal Gasifier Burner Made up of Inconel 718 Superalloy, Eng. Fail. Anal., 2019, 97, p 227-233. https://doi.org/10.1016/j.engfailanal.2019.01.04910.1016/j.engfailanal.2019.01.049 ↗
80. B. Grégoire, X. Montero, M.C. Galetz, G. Bonnet, and F. Pedraza, Mechanisms of Hot Corrosion of Pure Nickel at 700°C: Influence of Testing Conditions, Corros. Sci., 2018, 141, p 211-220. https://doi.org/10.1016/j.corsci.2018.06.00910.1016/j.corsci.2018.06.009 ↗
81. T.J. Stephenson, Corrosion – Fouling on Heat Transfer Surfaces, University of Alberta, Alberta, 2015.
82. E. Medvedovski, G.L. Mendoza, E. Rzad, M. Solecka, and T.P. Dudziak, Influence of Multi-layered Thermal Diffusion Coatings on High-Temperature Sulfidation Resistance of Steels, Surf. Coat. Technol., 2020, 403, 126430. https://doi.org/10.1016/j.surfcoat.2020.12643010.1016/j.surfcoat.2020.126430 ↗
83. A.S. Khanna, 5 - High Temperature Oxidation, Handbook of Environmental Degradation of Materials (Second Edition). M. Kutz Ed., William Andrew Publishing, Oxford, 2012, p 127-19410.1016/B978-1-4377-3455-3.00005-5 ↗
84. S. Bose, Chapter 4 - Oxidation, High Temperature Coatings. S. Bose Ed., Butterworth-Heinemann, Burlington, 2007, p 29-5210.1016/B978-075068252-7/50005-6 ↗
85. F. S. Rocha, Protective Coatings Against Surface Fouling and Sulfidation in Heavy Oil Environments, PhD Thesis, Polytechnique Montreal, 2024.