Performance of Sustainable WC-FeCrNiMo Coating by High-Velocity Air Fuel Spraying: A Potential Alternative to WC-Co Based Coatings
Source abstract
Abstract
Abstract The quest to find an alternative to Co-based metal binders has been of prime importance within the thermal spray community to develop sustainable, Co-free WC-based cermet coatings. In this study, we investigated WC-based coatings with FeCrNiMo as a Co-free binder, as an alternative to traditional WC-CoCr coatings. WC-FeCrNiMo powders with particle sizes of fine (25/5 µm) and coarse (45/15 µm) were deposited via high velocity air fuel (HVAF) spraying with various nozzle configurations. For benchmarking, a standard WC-CoCr coating with two particle sizes (45/15 and 30/5 µm) was included in all analyses and testing. The microstructure and mechanical properties of the coatings were thoroughly examined. Performance was evaluated through ball-on-disk sliding wear tests and air jet erosion tests. Microstructural analysis showed dense coatings, and XRD results confirmed that all coatings maintained the main phase composition of the feedstock, demonstrating HVAF's efficiency in preserving feedstock integrity. In sliding wear tests, the fine WC-FeCrNiMo coating showed a 57% lower wear rate (8.42 × 10 −8 mm 3 /Nm) compared to the coarser WC-FeCrNiMo coating (13.23 × 10 −8 mm 3 /Nm). In comparison, the standard WC-CoCr system exhibits an overall lower wear rate (2-3 × 10 −8 mm 3 /Nm), attributed to its better strain hardening. Although WC-FeCrNiMo coatings had higher wear rates, their values remained within the same order of magnitude (~10 −8 mm 3 /Nm), which is extremely low and suitable for many demanding tribological applications. Under erosion conditions, no significant difference in removal mechanisms was observed; however, the standard WC-CoCr coatings had better erosion resistance than WC-FeCrNiMo coatings. The overall findings from this study convey that WC-FeCrNiMo coatings are promising, offering performance comparable to Co-based binders.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Subcritical and Supercritical Water Processes · Erosion and Abrasive Machining
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. P. Fauchais, Current status and future directions of thermal spray coatings and techniques, in Future Development of Thermal Spray Coatings: Types, Designs, Manufacture and Applications, (Elsevier Inc., 2015), pp 17–4910.1016/B978-0-85709-769-9.00002-6 ↗
2. L.M. Berger, Coatings by thermal spray, in Comprehensive Hard Materials, (Elsevier Ltd., 2014), pp. 471–50610.1016/B978-0-08-096527-7.00017-9 ↗
3. H.L. De, V. Lovelock, Powder/Processing/Structure Relationships in WC-Co Thermal Spray Coatings: A Review of the Published Literature. J. Therm. Spray Technol. 7(3) (1998)10.1361/105996398770350846 ↗
4. H. Wang, Q. Qiu, M. Gee, C. Hou, X. Liu, X. Song, Wear Resistance Enhancement of HVOF-Sprayed WC-Co Coating by Complete Densification of Starting Powder. Mater. Des. 191 (2020)10.1016/j.matdes.2020.108586 ↗
5. A.M. Venter, V. Luzin, D. Marais, N. Sacks, E.N. Ogunmuyiwa, P.H. shipway, Interdependence of slurry erosion wear performance and residual stress in WC-12wt.% Co and WC-10wt%VC-12wt.%Co HVOF Coatings, Int. J. Refract. Metals Hard. Mater. 87 (2020)10.1016/j.ijrmhm.2019.105101 ↗
6. L.M. Berger, Application of Hardmetals as Thermal Spray Coatings, Int. J. Refract. Metals Hard. Mater., 2015, 49(1), p 350–364.10.1016/j.ijrmhm.2014.09.029 ↗
7. R. Ahmed, O. Ali, C.C. Berndt and A. Fardan, Sliding Wear of Conventional and Suspension Sprayed Nanocomposite WC-Co Coatings: An Invited Review, J. Therm. Spray Technol., 2021, 30, p 800–861.10.1007/s11666-021-01185-z ↗
8. IARC Monographs Vol. 86: Cobalt in Hard Metals and Cobalt Sulfate, Gallium Arsenide, Indium Phosphide and Vanadium Pentoxide,” I A R C (2006)
9. A.H. Tkaczyk, A. Bartl, A. Amato, V. Lapkovskis, M. Petranikova, Sustainability Evaluation of Essential Critical Raw Materials: Cobalt, Niobium, Tungsten and Rare Earth Elements, J. Phys. D Appl. Phys. 51(20) (2018)10.1088/1361-6463/aaba99 ↗
10. R.K. Viswanadham, P.G. Lindquist, Transformation-Toughening in Cemented Carbides: Part I. Binder Composition Control. n.d.
11. O.J. Ojo-Kupoluyi, S.M. Tahir, B.T.H.T. Baharudin, M.A. Azmah Hanim, M.S. Anuar, “Mechanical Properties of WC-Based Hardmetals Bonded with Iron Alloys—A Review. Mater. Sci. Technol. (United Kingdom), pp 507–517 (2017)10.1080/02670836.2016.1186929 ↗
12. Z. Roulon, S. Lay and J.M. Missiaen, Interface characteristics in cemented carbides with alternative binders, Int. J. Refract. Met. Hard Mater., 2020 https://doi.org/10.1016/j.ijrmhm.2020.10530610.1016/j.ijrmhm.2020.105306 ↗
13. First Principles Calculation of Interfacial Stability, Electronic and Mechanical Properties of WC-304 Cemented Carbides. n.d.
14. Commodities - Live Quote Price Trading Data,” n.d., https://tradingeconomics.com/commodities. Accessed 30 Sept 2025
15. Processing of WC with Fe-Based Alternative Binders Adjustment of C Content and Effect of Cr Addition. n.d.
16. P. Alvaredo, M. Dios, B. Ferrari and E. Gordo, Understanding of wetting and solubility behavior of Fe binder on Ti(C,N) cermets, J. Alloys Compd., 2019, 770, p 17–25. https://doi.org/10.1016/J.JALLCOM.2018.07.24310.1016/J.JALLCOM.2018.07.243 ↗
17. J.E. Cho, S.Y. Hwang and K.Y. Kim, Corrosion Behavior of Thermal Sprayed WC Cermet Coatings Having Various Metallic Binders in Strong Acidic Environment, Surf. Coat. Technol., 2006, 200(8), p 2653–2662.10.1016/j.surfcoat.2004.10.142 ↗
18. Z. Zhao, J. Liu, H. Tang, X. Ma and W. Zhao, Effect of Mo Addition on the Microstructure and Properties of WC-Ni-Fe Hard Alloys, J Alloys Compd, Elsevier Ltd, 2015, 646, p 155–160.10.1016/j.jallcom.2015.05.277 ↗
19. C.M. Fernandes, L.M. Vilhena, C.M.S. Pinho, F.J. Oliveira, E. Soares, J. Sacramento and A.M.R. Senos, Mechanical Characterization of WC-10wt.% AISI 304 Cemented Carbides, Mater. Sci. Eng. A, 2014, 618, p 629–636.10.1016/j.msea.2014.09.064 ↗
20. A.B. Oliveira, A.C. Bastos, C.M. Fernandes, C.M.S. Pinho, A.M.R. Senos, E. Soares, J. Sacramento, M.L. Zheludkevich and M.G.S. Ferreira, Corrosion Behaviour of WC-10% AISI 304 Cemented Carbides, Corros Sci, 2015, 100, p 322–331.10.1016/j.corsci.2015.08.006 ↗
21. V. Testa, S. Morelli, G. Bolelli, B. Benedetti, P. Puddu, P. Sassatelli and L. Lusvarghi, Alternative metallic matrices for WC-based HVOF coatings, Surf. Coat. Technol., 2020 https://doi.org/10.1016/j.surfcoat.2020.12630810.1016/j.surfcoat.2020.126308 ↗
22. K. Torkashvand, S. Joshi, V. Testa, F. Ghisoni, S. Morelli, G. Bolelli, L. Lusvarghi, F. Marra and M. Gupta, Tribological behavior of HVAF-sprayed WC-based coatings with alternative binders, Surf. Coat. Technol., 2022 https://doi.org/10.1016/j.surfcoat.2022.12829610.1016/j.surfcoat.2022.128296 ↗
23. K. Torkashvand, S. Joshi, M. Gupta, Advances in Thermally Sprayed WC-Based Wear-Resistant Coatings: Co-Free Binders, Processing Routes and Tribological Behavior. J. Therm. Spray Technol. (Springer, 2022), pp. 342–37710.1007/s11666-022-01358-4 ↗
24. K. Torkashvand, M. Gupta, S. Björklund, F. Marra, L. Baiamonte and S. Joshi, Influence of nozzle configuration and particle size on characteristics and sliding wear behaviour of HVAF-sprayed WC-CoCr coatings, Surf. Coat. Technol., 2021 https://doi.org/10.1016/j.surfcoat.2021.12758510.1016/j.surfcoat.2021.127585 ↗
25. I. Baumann, L. Hagen, W. Tillmann, P. Hollingsworth, D. Stangier, G. Schmidtmann, M. Tolan, M. Paulus and C. Sternemann, Process characteristics, particle behavior and coating properties during HVOF spraying of conventional, fine and nanostructured WC-12Co powders, Surf. Coat. Technol., 2021 https://doi.org/10.1016/j.surfcoat.2020.12671610.1016/j.surfcoat.2020.126716 ↗
26. C.J. Li, Y.Y. Wang, G.J. Yang, A. Ohmori and K.A. Khor, Effect of solid carbide particle size on deposition behaviour, microstructure and wear performance of HVOF cermet coatings, Mater. Sci. Technol., 2004, 20(9), p 1087–1096.10.1179/026708304225019722 ↗
27. Numerical Investigation of In-Flight Behavior of Fe-Based Amorphous Alloy Particles in AC-HVAF Thermal Spray Process. n.d.
28. X. Gao, C. Li, D. Zhang, H. Gao and X. Han, Numerical analysis of the activated combustion high-velocity air-fuel (AC-HVAF) thermal spray process: a survey on the parameters of operation and nozzle geometry, Surf. Coat. Technol., 2021 https://doi.org/10.1016/j.surfcoat.2020.12658810.1016/j.surfcoat.2020.126588 ↗
29. Evaluation of Residual Stresses and Their Influence on Cavitation Resistance of High Kinetic HVOF and HVAF-Sprayed-CoCr Coatings. n.d.
30. O. Takakuwa and H. Soyama, Effect of Residual Stress on the Corrosion Behavior of Austenitic Stainless Steel, Adv. Chem. Eng. Sci. Sci. Res. Publ Inc, 2015, 05(01), p 62–71.10.4236/aces.2015.51007 ↗
31. G. Bolelli, A. Milanti, L. Lusvarghi, L. Trombi, H. Koivuluoto and P. Vuoristo, Wear and Impact Behaviour of High Velocity Air-Fuel Sprayed Fe-Cr-Ni-B-C Alloy Coatings, Tribol Int, 2016, 95, p 372–390.10.1016/j.triboint.2015.11.036 ↗
32. K. Torkashvand, A.I. Encalada, B.C.N.M. de Castilho, M. Gupta, R. Chromik, S. Joshi, High-Temperature Sliding Wear Performance of HVAF Sprayed WC-Based Coatings with Alternative Binders, Wear. 538–539 (2024)10.1016/j.wear.2023.205206 ↗
33. L. Thakur and N. Arora, A Comparative Study on Slurry and Dry Erosion Behaviour of HVOF Sprayed WC-CoCr Coatings, Wear, 2013, 303(1–2), p 405–411.10.1016/j.wear.2013.03.028 ↗