journal article·2026-02

A Retrospective on 30 Years of Thermally Sprayed Environmental Barrier Coatings

B. J. Harder, E. J. Gildersleeve

Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Advanced ceramic materials synthesis · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. E.J. Opila, J.L. Smialek, R.C. Robinson, D.S. Fox, and N.S. Jacobson, SiC Recession Caused by SiO2 Scale Volatility Under Combustion Conditions: II, Thermodynamics and Gaseous-Diffusion Model, J. Am. Ceram. Soc., 1999, 82(7), p 1826–1834.10.1111/j.1151-2916.1999.tb02005.x ↗
2. N.S. Jacobson, D.S. Fox, J.L. Smialek, E.J. Opila, C. Dellacorte, Performance of Ceramics in Severe Environments, ASM Handbook 13B Corrosion: Materials, 2005, 565-578.10.31399/asm.hb.v13b.a0003842 ↗
3. N.S. Jacobson, E.J. Opila, and K.N. Lee, Oxidation and Corrosion of Ceramics and Ceramic Matrix Composites, Curr. Opin. Solid State Mater. Sci., 2001, 5(4), p 301–309. https://doi.org/10.1016/S1359-0286(01)00009-210.1016/S1359-0286(01)00009-2 ↗
4. K.L. More, P.F. Tortorelli, M.K. Ferber, and J.R. Keiser, Observations of Accelerated Silicon Carbide Recession by Oxidation at High Water-Vapor Pressures, J. Am. Ceram. Soc., 2000, 83(1), p 211–213. https://doi.org/10.1111/j.1151-2916.2000.tb01172.x10.1111/j.1151-2916.2000.tb01172.x ↗
5. R.C. Robinson, and J.L. Smialek, SiC Recession Caused by SiO2 Scale Volatility Under Combustion Conditions: I, Experimental Results and Empirical Model, J. Am. Ceram. Soc., 1999, 82(7), p 1817–1825. https://doi.org/10.1111/j.1151-2916.1999.tb02004.x10.1111/j.1151-2916.1999.tb02004.x ↗
6. M. van Roode, J. Price, J. Kimmel, N. Miriyala, D. Leroux, A. Fahme, and K. Smith, Ceramic Matrix Composite Combustor Liners: A Summary of Field Evaluations, J. Eng. Gas Turbines Power, 2007, 129(1), p 21–30.10.1115/1.2181182 ↗
7. J.I. Federer, Alumina Base Coatings for Protection of SiC Ceramics, J. Mater. Eng., 1990, 12, p 141–149.10.1007/BF02834067 ↗
8. K.N. Lee, R.A. Miller, and N.S. Jacobson, New Generation of Plasma-Sprayed Mullite Coatings on Silicon Carbide, J. Am. Ceram. Soc., 1995, 78(3), p 705–710.10.1111/j.1151-2916.1995.tb08236.x ↗
9. D. Brewer, HSR/EPM Combustor Materials Development Program, Mater. Sci. Eng. A, 1999, A261, p 284–291.10.1016/S0921-5093(98)01079-X ↗
10. S. Bogardus, B. Loper, C. Nauman, J. Page, R. Parris, and G. Steinbach, High Speed Civil Transport, NASA-CR-186661, 1990, p 1–81.
11. E.J. Mularz, Lean, Premixed, Prevaporized Combustion for Aircraft Gas Turbine Engines, NASA-TM-79148, 1979, p 1–18.10.2514/6.1979-1318 ↗
12. S.A. Mosier, and R.M. Pierce, Advanced Combustor Systems for Stationary Gas Turbine Engines, Phase I. Review and Preliminary Evaluation,” Volume I, Contract 68-02-2136, FR-11405, Final Report, U.S. Environmental Protection Agency., 1980.
13. E.J. Opila and R.E. Hann, Paralinear Oxidation of CVD SiC in Water Vapor, J. Am. Ceram. Soc., 1997, 80(1), p 197–205.10.1111/j.1151-2916.1997.tb02810.x ↗
14. E.J. Opila, Oxidation Kinetics of Chemically Vapor-Deposited Silicon Carbide in Wet Oxygen, J. Am. Ceram. Soc., 1994, 77(3), p 730–736.10.1111/j.1151-2916.1994.tb05357.x ↗
15. E.J. Opila, Variation of the Oxidation Rate of Silicon Carbide with Water-Vapor Pressure, J. Am. Ceram. Soc., 1999, 82(3), p 625–636.10.1111/j.1151-2916.1999.tb01810.x ↗
16. J.L. Smialek, R.C. Robinson, E.J. Opila, D.S. Fox and N.S. Jacobson, SiC and Si3N4 Recession Due to SiO2 Scale Volatility under Combustor Conditions, Adv. Compos. Mater., 1999, 8(1), p 33–45.10.1163/156855199X00056 ↗
17. N.S. Jacobson, Corrosion of Silicon-Based Ceramics in Combustion Environments, J. Am. Ceram. Soc., 1993, 76(1), p 3–28.10.1111/j.1151-2916.1993.tb03684.x ↗
18. P.F. Tortorelli, and K.L. More, Effects of High Water-Vapor Pressure on Oxidation of Silicon Carbide at 1200°C, J. Am. Ceram. Soc., 2003, 86(8), p 1249–1255.10.1111/j.1151-2916.2003.tb03460.x ↗
19. E.J. Opila, D.S. Fox, and N.S. Jacobson, Mass Spectrometric Identification of Si-O-H(g) Species from the Reaction of Silica with Water Vapor at Atmospheric Pressure, J. Am. Ceram. Soc., 1997, 80(4), p 1009–1012.10.1111/j.1151-2916.1997.tb02935.x ↗
20. K.N. Lee, E.J. Opila, and R.A. Miller, Oxidation and Pore Formation at the Mullite/SiC Interface in Air and Water Vapor, Fundamental Aspects of High Temperature Corrosion VI, (San Antonio, Texas), 1996, p 124–136.
21. K.N. Lee and R.A. Miller, Development and Environmental Durability of Mullite and Mullite/YSZ Dual Layer Coatings for SiC and Si3N4 Ceramics, Surf. Coat. Technol., 1996, 86–87(PART 1), p 142–148.10.1016/S0257-8972(96)03074-5 ↗
22. H. Wang, and K. Luthra, “Ceramic With Preferential Oxygen Reactive Layer,” 2001, p US006299988B1.
23. G. Corman, R. Upadhyay, S. Sinha, S. Sweeney, S. Wang, S. Biller, and K. Luthra, General Electric Company: Selected Applications of Ceramics and Composite Materials, Springer Series in Materials Science, Springer, 2016, p 59–91. https://doi.org/10.1007/978-3-319-23419-9_3.10.1007/978-3-319-23419-9_3 ↗
24. K.N. Lee, Current Status of Environmental Barrier Coatings for Si-Based Ceramics, Surf. Coat. Technol., 2000, 133–134, p 1–7.
25. R.J. Shaw, “Nasa’s Ultra-Efficient Engine Technology (Ueet) Program/Aeropropulsion Technology Leadership For The 21 St Century,” ICAS2000-6102.1, (Harrogate, UK), 2000, p 1–11.
26. K.N. Lee, D.S. Fox, and N.P. Bansal, Rare Earth Silicate Environmental BarrierCoatings for SiC/SiC Composites and Si3N4 Ceramics, J. Eur. Ceram. Soc., 2005, 25, p 1705–1715.10.1016/j.jeurceramsoc.2004.12.013 ↗
27. M. Ridley, J. Gaskins, P. Hopkins, and E. Opila, Tailoring Thermal Properties of Multi-component Rare Earth Monosilicates, Acta Mater., 2020, 195, p 698–707.10.1016/j.actamat.2020.06.012 ↗
28. E. Bakan, Y.J. Sohn, W. Kunz, H. Klemm, and R. Vaßen, Effect of Processing on High-Velocity Water Vapor Recession Behavior of Yb-silicate Environmental Barrier Coatings, J. Eur. Ceram. Soc., 2019, 39(4), p 1507–1513. https://doi.org/10.1016/j.jeurceramsoc.2018.11.04810.1016/j.jeurceramsoc.2018.11.048 ↗
29. B.T. Richards, K.A. Young, F. de Francqueville, S. Sehr, M.R. Begley, and H.N.G. Wadley, Response of Ytterbium Disilicate-Silicon Environmental Barrier Coatings to Thermal Cycling in Water Vapor, Acta Mater., 2016, 106, p 1–14. https://doi.org/10.1016/j.actamat.2015.12.05310.1016/j.actamat.2015.12.053 ↗
30. M. Ridley and E. Opila, Thermochemical Stability and Microstructural Evolution of Yb2Si2O7 in High-Velocity High-Temperature Water Vapor, J. Eur. Ceram. Soc., 2021, 41(5), p 3141–3149. https://doi.org/10.1016/j.jeurceramsoc.2020.05.07110.1016/j.jeurceramsoc.2020.05.071 ↗
31. N.S. Jacobson, Silica Activity Measurements in the Y2O3-SiO2 System and Applications to Modeling of Coating Volatility, J. Am. Ceram. Soc., 2014, 97(6), p 1959–1965.10.1111/jace.12974 ↗
32. G.C.C. Costa, and N.S. Jacobson, Mass Spectrometric Measurements of the Silica Activity in the Yb2O3–SiO2 System and Implications to Assess the Degradation of Silicate-Based Coatings in Combustion Environments, J. Eur. Ceram. Soc., 2015, 35(15), p 4259–4267. https://doi.org/10.1016/j.jeurceramsoc.2015.07.01910.1016/j.jeurceramsoc.2015.07.019 ↗
33. B.A. Kowalski, N.S. Jacobson, C. Bodenschatz, and G. Costa, Thermodynamics of the Lu2O3-SiO2 System and Comparison to Other Rare Earth Silicates, J. Chem. Thermodyn., 2021, 161, 106483.10.1016/j.jct.2021.106483 ↗
34. N.P. Padture, Environmental Degradation of High-Temperature Protective Coatings for Ceramic-Matrix Composites in Gas-Turbine Engines, NPJ Mater. Degrad., 2019, 3(1), 11. https://doi.org/10.1038/s41529-019-0075-410.1038/s41529-019-0075-4 ↗
35. B.T. Richards, and H.N.G. Wadley, Plasma Spray Deposition of Tri-layer Environmental Barrier Coatingss, J. Eur. Ceram. Soc., 2014, 34(12), p 3069–3083. https://doi.org/10.1016/j.jeurceramsoc.2014.04.02710.1016/j.jeurceramsoc.2014.04.027 ↗
36. B.T. Richards, H. Zhao, and H.N.G. Wadley, Structure, Composition, and Defect Control During Plasma Spray Deposition of Ytterbium Silicate Coatings, J. Mater. Sci., 2015, 50(24 LB-Richards2015), p 7939–7957. https://doi.org/10.1007/s10853-015-9358-510.1007/s10853-015-9358-5 ↗
37. E. Bakan, D. Marcano, D. Zhou, Y.J. Sohn, G. Mauer and R. Vaßen, Yb2Si2O7 Environmental Barrier Coatings Deposited by Various Thermal Spray Techniques: A Preliminary Comparative Study, J. Therm. Spray Technol., 2017, 26(6), p 1011–1024.10.1007/s11666-017-0574-1 ↗
38. E. Garcia, H. Lee and S. Sampath, Phase and Microstructure Evolution in Plasma Sprayed Yb2Si2O7 Coatings, J. Eur. Ceram. Soc., 2019, 39(4), p 1477–1486. https://doi.org/10.1016/j.jeurceramsoc.2018.11.01810.1016/j.jeurceramsoc.2018.11.018 ↗
39. D. Zhu, K.N. Lee, and R.A. Miller, Thermal Conductivity and Thermal Gradient Cyclic Behavior of Refractory Silicate Coatings on Sic/Sic Ceramic Matrix Composites. iN: 25th Annual Conference on Composites, Advanced Ceramics, Materials, and Structures: B: Ceramic Engineering and Science Proceedings, 2001, p 443–452. https://doi.org/10.1002/9780470294703.ch53.10.1002/9780470294703.ch53 ↗
40. K.N. Lee, D.S. Fox, J.I. Eldridge, D. Zhu, R.C. Robinson, N.P. Bansal and R.A. Miller, Upper Temperature Limit of Environmental Barrier Coatings Based on Mullite and BSAS, J. Am. Ceram. Soc., 2003, 86(8), p 1299–1306.10.1111/j.1151-2916.2003.tb03466.x ↗
41. I. Spitsberg and J. Steibel, Thermal and Environmental Barrier Coatings for SiC/SiC CMCs in Aircraft Engine Applications, Int. J. Appl. Ceram. Technol., 2004, 1(4), p 291–301. https://doi.org/10.1111/j.1744-7402.2004.tb00181.x10.1111/j.1744-7402.2004.tb00181.x ↗
42. Y. Xu, X. Hu, F. Xu and K. Li, Rare Earth Silicate Environmental Barrier Coatings: Present Status and Prospective, Ceram. Int., 2017, 43(8), p 5847–5855. https://doi.org/10.1016/j.ceramint.2017.01.15310.1016/j.ceramint.2017.01.153 ↗
43. J. Felsche, Polymorphism and Crystal Data of the Rare-Earth Disilicates of Type R.E.2Si2O7, J. Less Common Met., 1970, 21, p 1–14.10.1016/0022-5088(70)90159-1 ↗
44. E. Garcia, H.F. Garces, L.R. Turcer, H. Bale, N.P. Padture and S. Sampath, Crystallization Behavior of Air-Plasma-Sprayed Ytterbium-Silicate-Based Environmental Barrier Coatings, J. Eur. Ceram. Soc., 2021, 41(6), p 3696–3705. https://doi.org/10.1016/j.jeurceramsoc.2020.12.05110.1016/j.jeurceramsoc.2020.12.051 ↗
45. K.N. Lee,Yb2Si2O7 Environmental Barrier Coatings with Reduced Bond Coat Oxidation Rates via Chemical Modifications for Long Life, J. Am. Ceram. Soc., 2019, 102(3), p 1507–1521.10.1111/jace.15978 ↗
46. K.N. Lee, D. Zhu and R.S. Lima, Perspectives on Environmental Barrier Coatings (EBCS) Manufactured Via Air Plasma Spray (APS) on Ceramic Matrix Composites (CMCS): A Tutorial Paper, J. Therm. Spray Technol., 2021, 30, p 40–58. https://doi.org/10.1007/s11666-021-01168-010.1007/s11666-021-01168-0 ↗
47. M.J. Presby, J.L. Stokes, B.J. Harder, K.N. Lee and L.C. Hoffman, High Temperature Solid Particle Erosion Of Environmental and Thermal Barrier Coatings, Coatings, 2023, 13(902), p 1–17.
48. “Pegasus Airlines Enjoys Smooth Entry Into Service With LEAP-1A,” GE Aerospace, 2016, https://www.geaerospace.com/news/press-releases/joint-ventures/pegasus-airlines-enjoys-smooth-entry-service-leap-1a.
49. “Fleet Statistics,” CFM International, 2025, https://www.cfmaeroengines.com/engines/fleet-statistics/.
50. “GE9X Engine Achieves FAA Certification,” GE Aerospace, 2020, https://www.ge.com/news/reports/ge9x-engine-achieves-faa-certification.
51. D. Delling, “5 Things to Know About the CFM RISE Program,” GE Aerospace, 2024, https://www.geaerospace.com/news/articles/5-things-know-about-cfm-rise-program.
52. C. Kjelgaard, “CFM Fixes Leap Turbine Shroud Coatings,” Aviation International News, 2018, https://www.ainonline.com/aviation-news/air-transport/2018-07-17/cfm-fixes-leap-turbine-shroud-coatings.
53. K.N. Lee, Environmental Barrier Coatings for SiCf/SiC, Ceramic Matrix Composites, 2014, p 430–451. https://doi.org/10.1002/9781118832998.ch15.10.1002/9781118832998.ch15 ↗
54. S. Ueno, T. Ohji and H.-T. Lin, Recession Behavior of Yb2Si2O7 Phase Under High Speed Steam Jet at High Temperatures, Corros. Sci., 2008, 50(1), p 178–182.10.1016/j.corsci.2007.06.014 ↗
55. R.A. Golden, K. Mueller and E.J. Opila, Thermochemical Stability of Y2Si2O7 in High-Temperature Water Vapor, J. Am. Ceram. Soc., 2020, 103(8), p 4517–4535.10.1111/jace.17114 ↗
56. M. Ridley and E. Opila, Variable Thermochemical Stability of RE2Si2O7 (RE = Sc, Nd, Er, Yb, or Lu) in High-Temperature High-Velocity Steam, J. Am. Ceram. Soc., 2022, 105(2), p 1330–1342.10.1111/jace.18120 ↗
57. B.T. Richards, K.A. Young, F. De Francqueville, S. Sehr, M.R. Begley and H.N.G. Wadley, Response Of Ytterbium Disilicate-Silicon Environmental Barrier Coatings to Thermal Cycling in Water Vapor, Acta Mater., 2016, 106, p 1–14. https://doi.org/10.1016/j.actamat.2015.12.05310.1016/j.actamat.2015.12.053 ↗
58. J. Wu, W. Yang, X. Zhang, C. Wang, X. Zhuo, Y. Zhan, M. Liu, and K. Zhou, Corrosion Behavior of PS-PVD spray Yb2Si2O7 Environmental Barrier Coatings During Continuous Water Vapor Exposure, Corros. Sci., 2023, 210, 110831. https://doi.org/10.1016/j.corsci.2022.11083110.1016/j.corsci.2022.110831 ↗
59. K.M. Grant, S. Krämer, J.P.A. Löfvander, and C.G. Levi, Degradation of Environmental Barrier Coatings. Surf. Coatings Technol., 2007, 202, p 653–657.10.1016/j.surfcoat.2007.06.045 ↗
60. B.J. Harder, J.J. Ramı, J.D. Almer, K.N. Lee, and K.T. Faber, Chemical and Mechanical Consequences of Environmental Barrier Coating Exposure to Calcium–Magnesium–Aluminosilicate. J. Am. Ceram. Soc., 2011, 185, p 178–185.10.1111/j.1551-2916.2011.04448.x ↗
61. F. Stolzenburg, M.T. Johnson, K.N. Lee, N.S. Jacobson and K.T. Faber, The Interaction of Calcium–Magnesium–Aluminosilicate With Ytterbium Silicate Environmental Barrier Materials, Surf. Coat. Technol., 2015, 284, p 44–50. https://doi.org/10.1016/j.surfcoat.2015.08.06910.1016/j.surfcoat.2015.08.069 ↗
62. F. Stolzenburg, P. Kenesei, J. Almer, K.N. Lee, M.T. Johnson and K.T. Faber, Acta Materialia The in Fl Uence of Calcium e Magnesium e Aluminosilicate Deposits on Internal Stresses in Yb2Si2O7 Multilayer Environmental Barrier Coatings, Acta Mater., 2016, 105, p 189–198. https://doi.org/10.1016/j.actamat.2015.12.01610.1016/j.actamat.2015.12.016 ↗
63. H. Zhao, B.T. Richards, C.G. Levi and H.N.G. Wadley, Surface & Coatings Technology Molten Silicate Reactions with Plasma Sprayed Ytterbium Silicate Coatings, Surf. Coat. Technol., 2016, 288, p 151–162. https://doi.org/10.1016/j.surfcoat.2015.12.05310.1016/j.surfcoat.2015.12.053 ↗
64. D.L. Poerschke, J.H. Shaw, N. Verma, F.W. Zok and C.G. Levi, Interaction of Yttrium Disilicate Environmental Barrier Coatings With Calcium-Magnesium-Iron Alumino-Silicate Melts, Acta Mater., 2018, 145, p 451–461. https://doi.org/10.1016/j.actamat.2017.12.00410.1016/j.actamat.2017.12.004 ↗
65. B.T. Richards, D. Zhu, L.J. Ghosn, and H.N.G. Wadley, Mechanical Properties of Air Plasma Sprayed Environmental Barrier Coating (EBC) Systems: Preliminary Assessments. In: Ceramic Engineering and Science Proceedings, 2015, p 219–237.10.1002/9781119211747.ch18 ↗
66. S.K. Mital, T.M. Ricks, S.M. Arnold, and B.J. Harder, Modeling of the Influence of a Damaged Thermally Grown Oxide (TGO) Layer in an Environmental Barrier Coating System. In: Proceedings of the American Society for Composites, 2019.10.12783/asc34/31353 ↗
67. M.J. Presby, J.L. Stokes, and B.J. Harder, Solid Particle Erosion in Ceramic Matrix Composites and Environmental Barrier Coatings: A Perspective, J. Am. Ceram. Soc., 2023 https://doi.org/10.1111/jace.1937610.1111/jace.19376 ↗
68. L.C. Hoffman, M.J. Presby, J.L. Stokes, B.J. Harder, and J.A. Salem, The Effect of Oxidation in Environmental Barrier Coatings Subject To Foreign Object Damage. In: Proceedings of ASME 2023 Aerospace Structures, Structural Dynamics, and Materials Conference, SSDM 2023, 2023, p 107437 (1–8).10.1115/SSDM2023-107437 ↗
69. L.C. Hoffman, M.J. Presby, B.J. Harder, and J.L. Stokes, “Foreign Object Damage in Ytterbium Disilicate Based Environmental Barrier Coatings Modified for Oxidation Resistance. In: Proceedings of ASME 2024 Aerospace Structures, Structural Dynamics, and Materials Conference, SSDM 2024, 2024, p 121869 (1–8).10.1115/SSDM2024-121869 ↗
70. B.J. Harder, J.L. Stokes, B.A. Kowalski, J. Stuckner and J.A. Setlock, Steam Oxidation Performance of Yb2Si2O7 Environmental Barrier Coatings Exposed to CMAS, J. Eur. Ceram. Soc., 2024, 44, p 2486–2498. https://doi.org/10.1016/j.jeurceramsoc.2023.10.07310.1016/j.jeurceramsoc.2023.10.073 ↗
71. J.L. Stokes, M.J. Presby, L.C. Hoffman, J.A. Setlock, J.A. Salem, and B.J. Harder, Surface & Coatings Technology Effects of Molten Silicate Reactivity on High Temperature Erosion Behavior of Plasma Sprayed Yb2Si2O7-Based EBCs, Surf. Coat. Technol., 2024, 494(131078), p 1–10. https://doi.org/10.1016/j.surfcoat.2024.13107810.1016/j.surfcoat.2024.131078 ↗
72. L. Hoffman, J.L. Stokes, and J. Setlock, “Foreign Object Damage of Environmental Barrier Coatings Subjected To CMAS Attack,” Proceedings of the ASME Turbo Expo 2024, 2024, p 125928 (1–10).10.1115/1.4068159 ↗
73. B.J. Harder, M.J. Presby, J.A. Salem, S.M. Arnold, and S.K. Mital, Environmental Barrier Coating Oxidation And Adhesion Strength, J. Eng. Gas Turbines Power, 2021, 143(3), 031004.10.1115/1.4049414 ↗
74. D.R. Peacor, High-Temperature Study of the Cristobalite Inversion Z. Kristallogr., 1973, 138(298), p 274–298.
75. J.L. Stokes, β-Cristobalite Thermal Expansion and Stability in Environmental Barrier Coating Systems, J. Am. Ceram. Soc., 2025, 108, p 1–8.10.1111/jace.20214 ↗
76. T.G. Aguirre, L. Lin, M.J. Ridley, K.A. Kane, and B.A. Pint, Finite Element Modeling of the Phase Change in Thermally-Grown SiO2 in SiC Systems for Gas Turbines, JOM, 2024, 76, p 4131–4145.10.1007/s11837-024-06507-4 ↗
77. M.J. Lance, M.J. Ridley, K.A. Kane, and B.A. Pint, Raman Spectroscopic Characterization of SiO2 Phase Transformation and Si Substrate Stress Relevant to EBC Performance, J. Am. Ceram. Soc., 2023, 106(10), p 6205–6210.10.1111/jace.19190 ↗
78. K.N. Lee, A. Garg, and W.D. Jennings, Effects of the Chemistry of Coating and Substrate on the Steam Oxidation Kinetics of Environmental Barrier Coatings for Ceramic Matrix Composites, J. Eur. Ceram. Soc., 2021, 41(February), p 5675–5685.10.1016/j.jeurceramsoc.2021.04.037 ↗
79. G.C. Costa, M.J. Presby, A.S. Almansour, R.I. Webster, and K.N. Lee, Chemical and Mechanical Properties of Modified Yb2Si2O7 Environmental Barrier Coatings Corroded by a Silicate Melt, Corros. Sci., 2024, 238, 112378.10.1016/j.corsci.2024.112378 ↗
80. K.N. Lee, J. Stuckner, A. Garg, R.I. Webster, and L.G. Wilson, Influence of Coating Variables on the Steam Oxidation of Modified Silicon/Ytterbium Disilicate Environmental Barrier Coatings, Surf. Coatings Technol., 2024, 2025(496), 131696. https://doi.org/10.1016/j.surfcoat.2024.13169610.1016/j.surfcoat.2024.131696 ↗
81. D. Zhu, and R.A. Miller, Thermal and Environmental Barrier Coatings for Advanced Propulsion Engine Systems, NASA TM 2004-213129, 2004, (August), p 1–11.
82. E. Bakan, E.J. Gildersleeve, and R. Vaßen, Towards Highly Dense Yb-Silicate Microstructures Deposited by Air Plasma Spray for Environmental Barrier Coating Applications I: Influence of Local Deposition Rate, J. Therm. Spray Tech. 34, 1985-1994 (2025).10.1007/s11666-025-01969-7 ↗
83. E.J. Gildersleeve, E. Bakan, and R. Vaßen, Towards Highly Dense Yb-Silicate Microstructures Deposited by Air Plasma Spray for Environmental Barrier Coating Applications II: Plasma Gas Composition, Feedstock, and Anode Orifice Comparisons, J. Therm. Spray Technol., 2025 https://doi.org/10.1007/s11666-025-01937-110.1007/s11666-025-01937-1 ↗
84. E. Bakan, D. Zhou, D.E. Mack, D. Koch, and R. Vaßen, Plasma Sprayed Duplex Ytterbium Disilicate/Monosilicate Ebcs and the Transformation From Ytterbia to Ytterbium Monosilicate During Burner Rig Testing, Corros. Sci., 2024, 235, 112174. https://doi.org/10.1016/j.corsci.2024.11217410.1016/j.corsci.2024.112174 ↗
85. E. Bakan, Y.J. Sohn and R. Vaßen, Metastable to Stable Phase Transformation in Atmospheric Plasma Sprayed Yb-Silicate Coating During Post-Heat Treatment, Scr. Mater., 2023, 225, 115169. https://doi.org/10.1016/j.scriptamat.2022.11516910.1016/j.scriptamat.2022.115169 ↗
86. E. Garcia, O. Sotelo-Mazon, C.A. Poblano-Salas, G. Trapaga and S. Sampath, Characterization of Yb2Si2O7–Yb2SiO5 Composite Environmental Barrier Coatings Resultant From In Situ Plasma Spray Processing, Ceram. Int., 2020, 46(13), p 21328–21335. https://doi.org/10.1016/j.ceramint.2020.05.22810.1016/j.ceramint.2020.05.228 ↗
87. K.A. Kane, E. Garcia, S. Uwanyuze, M. Lance, K.A. Unocic, S. Sampath, and B.A. Pint, Steam Oxidation of Ytterbium Disilicate Environmental Barrier Coatings with and without a Silicon Bond Coat, J. Am. Ceram. Soc., 2021, 104(5), p 2285–2300.10.1111/jace.17650 ↗
88. E. Bakan, and R. Vaßen, Crack Healing Mechanisms in Atmospheric Plasma Sprayed Yb-Silicate Coatings During Post-Process Heat Treatment, J. Eur. Ceram. Soc., 2023, 43(8), p 3684–3693. https://doi.org/10.1016/j.jeurceramsoc.2023.02.00510.1016/j.jeurceramsoc.2023.02.005 ↗
89. E. Bakan, G. Mauer, Y.J. Sohn, D. Koch and R. Vaßen, Application of High-Velocity Oxygen-Fuel (HVOF) Spraying to the Fabrication of Yb-Silicate Environmental Barrier Coatings, Coatings, 2017 https://doi.org/10.3390/coatings704005510.3390/coatings7040055 ↗
90. B. Li, X. Zhang, Z. Zhang, L. Deng, Q. Li, F. Zhou, B. Xu, J. Hu and Y. Wang, Preparation and Characterization of a Novel Nanostructured Yb2Si2O7 Feedstock used for Plasma-Sprayed Environmental Brrier Coatings, Ceram. Int., 2023, 49(7), p 10897–10905. https://doi.org/10.1016/j.ceramint.2022.11.28310.1016/j.ceramint.2022.11.283 ↗
91. H. Ryu, S.-M. Lee, Y.-S. Han, K. Choi, G.S. An, S. Nahm, and Y.-S. Oh, Preparation Of Crystalline Ytterbium Disilicate Environmental Barrier Coatings Using Suspension Plasma Spray, Ceram. Int., 2019, 45(5), p 5801–5807. https://doi.org/10.1016/j.ceramint.2018.12.04810.1016/j.ceramint.2018.12.048 ↗
92. F. Arhami, F. Ben Ettouil, and C. Moreau, As-Sprayed Highly Crystalline Yb2Si2O7 Environmental Barrier Coatings (EBCs) by Atmospheric Plasma Spray (APS), J. Therm. Spray Technol., 2023, 32(2), p 706–718. https://doi.org/10.1007/s11666-022-01526-610.1007/s11666-022-01526-6 ↗
93. D. Chen, Suspension HVOF Sprayed Ytterbium Disilicate Environmental Barrier Coatings, J. Therm. Spray Technol., 2022, 31(3), p 429–435. https://doi.org/10.1007/s11666-022-01343-x10.1007/s11666-022-01343-x ↗
94. H. Kassner, R. Siegert, D. Hathiramani, R. Vassen, and D. Stoever, Application of Suspension Plasma Spraying (SPS) For Manufacture of Ceramic Coatings, J. Therm. Spray Technol., 2008, 17(1), p 115–123.10.1007/s11666-007-9144-2 ↗
95. R. Vaßen, H. Kaßner, G. Mauer, and D. Stöver, Suspension Plasma Spraying: Process Characteristics and Applications, J. Therm. Spray Technol., 2010, 19(1–2), p 219–225.10.1007/s11666-009-9451-x ↗
96. R. Chidambaram Seshadri, G. Dwivedi, V. Viswanathan, and S. Sampath, Characterizing Suspension Plasma Spray Coating Formation Dynamics Through Curvature Measurements, J. Therm. Spray Technol., 2016, 25(8), p 1666–1683. https://doi.org/10.1007/s11666-016-0460-210.1007/s11666-016-0460-2 ↗
97. B.J. Harder, D. Zhu, M.P. Schmitt, and D.E. Wolfe, Microstructural Effects And Properties of Non-Line-of-Sight Coating Processing Via Plasma Spray-Physical Vapor Deposition, J. Therm. Spray Technol., 2017, 26(6), p 1052–1061.10.1007/s11666-017-0570-5 ↗
98. E.S.C. Fan, and O. Kesler, Deposition of Lanthanum Strontium Cobalt Ferrite (LSCF) Using Suspension Plasma Spraying for Oxygen Transport Membrane Applications, J. Therm. Spray Technol., 2015, 24(6), p 1081–1092. https://doi.org/10.1007/s11666-015-0269-410.1007/s11666-015-0269-4 ↗
99. B. Zhang, H. Zhang, M. Bai, A. Du, E.B. Owusu, A. Lynam, A. Rincon, R. Nicholas, and C. Tanvir, Thermal Properties and Calcium-Magnesium-Alumino-Silicate (CMAS) Interaction of Novel γ-Phase Ytterbium-Doped Yttrium Disilicate (γ-Y1.5 Yb 0.5 Si2O7 ) Environmental Barrier Coating Material, Adv. Compos. Hybrid Mater., 2024, 7(64), p 1–20. https://doi.org/10.1007/s42114-024-00879-6.10.1007/s42114-024-00879-6 ↗
100. B.J. Harder, and D. Zhu, Plasma Spray-Physical Vapor Deposition (PS-PVD) of Ceramics for Protective Coatings, Advanced Ceramic Coatings and Materials for Extreme Environments, 2011, p 71–84. https://doi.org/10.1002/9781118095232.ch7.10.1002/9781118095232.ch7 ↗