journal article·2026-04

Shear Punch Testing for the Ductility Evaluation of Cold-Sprayed Copper Coatings

Ioannis Kotsakis, Christina-Maria Katsari, Bruno Guerreiro, Dominique Poirier, Jason D. Giallonardo, Stephen Yue

Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Engineering and Material Science Research · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. G.E. Lucas, Review of Small Specimen Test Techniques for Irradiation Testing, Metall. Trans. A, 1990, 21, p 1105-1119. https://doi.org/10.1007/BF0265653110.1007/BF02656531 ↗
2. G.E. Lucas, J.W. Sheckherd, G.R. Odette, and S. Panchanadeeswaran, Shear Punch Tests for Mechanical Property Measurements in TEM Disc-Sized Specimens, J. Nucl. Mater., 1984, 122(1-3), p 429-434.10.1016/0022-3115(84)90635-4 ↗
3. G.E. Lucas, J.W. Sheckherd, and G.R. Odette, ASTM STP vol. 888 (1986) pp. 112-13910.1520/STP32998S ↗
4. R.K. Guduru, K.A. Darling, R. Kishore, R.O. Scattergood, C.C. Koch, and K.L. Murty, Evaluation of Mechanical Properties using Shear–Punch Testing, Mater. Sci. Eng. A, 2005, 395(1-2), p 307-314. https://doi.org/10.1016/j.msea.2004.12.04810.1016/j.msea.2004.12.048 ↗
5. A.M. Elwazri, R. Varano, P. Wanjara, and S. Yue, Effect of Specimen Thickness and Punch Diameter in Shear Punch Testing, Can. Metall. Q., 2006, 45(1), p 33-40. https://doi.org/10.1179/cmq.2006.45.1.3310.1179/cmq.2006.45.1.33 ↗
6. G.R. Stewart, A.M. Elwazri, R. Varano, N. Pokutylowicz, S. Yue, and J.J. Jonas, Shear Punch Testing of Welded Pipeline Steel, Mater. Sci. Eng. A, 2006, 420(1-2), p 115-121. https://doi.org/10.1016/j.msea.2006.01.08110.1016/j.msea.2006.01.081 ↗
7. A.M. Elwazri, P. Wanjara, and S. Yue, The Effect of Microstructural Characteristics of Pearlite on the Mechanical Properties of Hypereutectoid Steel, Mater. Sci. Eng. A, 2005, 404(1-2), p 91-98. https://doi.org/10.1016/j.msea.2005.05.05110.1016/j.msea.2005.05.051 ↗
8. E. Am, A. Fatehi, J. Calvo, D. Bai, and S. Yue, Analysis of Copper Effect on Microstructures and Mechanical Properties in Microalloyed Steels, ISIJ Int., 2008, 48(1), p 107-113. https://doi.org/10.2355/isijinternational.48.10710.2355/isijinternational.48.107 ↗
9. P. Wanjara, R.A.L. Drew, and S. Yue, Application of Small Specimen Testing Technique for Mechanical Property Assessment of Discontinuously Reinforced Composites, Mater. Sci. Technol., 2006, 22(1), p 61-71. https://doi.org/10.1179/174328413X1378982429326310.1179/174328413X13789824293263 ↗
10. S. Acharya and K.K. Ray, Assessment of Tensile Properties of Spot Welds using Shear Punch Test, Mater. Sci. Eng. A, 2013, 565, p 405-413. https://doi.org/10.1016/j.msea.2012.12.06810.1016/j.msea.2012.12.068 ↗
11. R.K. Guduru, K.A. Darling, R.O. Scattergood, C.C. Koch, and K.L. Murty, Mechanical Properties of Electrodeposited Nanocrystalline Copper using Tensile and Shear Punch Tests, J. Mater. Sci., 2007, 42(14), p 5581-5588.10.1007/s10853-006-1095-3 ↗
12. M.J. Sohrabi, H. Mirzadeh, A.R. Geranmayeh, and R. Mahmudi, Grain Size Dependent Mechanical Properties of CoCrFeMnNi High-Entropy Alloy Investigated by Shear Punch Testing, J. Mater. Res. Technol., 2023, 27, p 1258-1264. https://doi.org/10.1016/j.jmrt.2023.09.31310.1016/j.jmrt.2023.09.313 ↗
13. E. Abbasi and K. Dehghani, Effect of Nb-C Addition on the Microstructure and Mechanical Properties of CoCrFeMnNi High Entropy Alloys during Homogenisation, Mater. Sci. Eng. A, 2019, 753, p 224-231. https://doi.org/10.1016/j.msea.2019.03.05710.1016/j.msea.2019.03.057 ↗
14. S. Ghaemifar and H. Mirzadeh, Shear Punch Testing for Evaluation of Mechanical Properties of Post Heat-Treated Inconel 718 Nickel-Based Superalloy Fabricated by Additive Manufacturing, J. Mater. Res. Technol., 2023, 26, p 8071-8078.10.1016/j.jmrt.2023.09.149 ↗
15. J. Escobar, J. Silverstein, F. Ishrak, L. Li, A. Soulami, S. Li, A. Yu, S. Mathaudhu, A. Ortiz, C. Koch, and A. Devaraj, Microstructural Evolution in Shear-Punch Tests: A Comparative Study of Pure Cu and Cu-Cr Alloy, Mater. Sci. Eng. A, 2023, 886, 145715. https://doi.org/10.1016/j.msea.2023.14571510.1016/j.msea.2023.145715 ↗
16. G.L. Hankin, M.B. Toloczko, M.L. Hamilton, and R.G. Faulkner, Validation of the Shear Punch–Tensile Correlation Technique using Irradiated Materials, J. Nucl. Mater., 1998, 258, p 1651-1656. https://doi.org/10.1016/S0022-3115(98)00203-710.1016/S0022-3115(98)00203-7 ↗
17. V. Karthik, P. Visweswaran, A. Vijayraghavan, K.V. Kasiviswanathan, and B. Raj, Tensile–Shear Correlations Obtained from Shear Punch Test Technique using a Modified Experimental Approach, J. Nucl. Mater., 2009, 393(3), p 425-432. https://doi.org/10.1016/j.jnucmat.2009.06.02710.1016/j.jnucmat.2009.06.027 ↗
18. V. Karthik, R. Kumar, A. Vijayaragavan, C.N. Venkiteswaran, V. Anandaraj, P. Parameswaran, S. Saroja, N.G. Muralidharan, J. Joseph, K.V. Kasiviswanathan, and T. Jayakumar, Characterization of Mechanical Properties and Microstructure of Highly Irradiated SS 316, J. Nucl. Mater., 2013, 439(1-3), p 224-231. https://doi.org/10.1016/j.jnucmat.2012.06.00610.1016/j.jnucmat.2012.06.006 ↗
19. N.S. Karmarkar Characterization of Cold-Sprayed Copper Coatings and comparison with Wrought Copper using Miniaturized Shear Punch Tests (SPT) (Doctoral dissertation) (2018)
20. H. Aydin, M. Alomair, W. Wong, P. Vo, and S. Yue, Cold Sprayability of Mixed Commercial Purity Ti Plus Ti6Al4V Metal Powders, J. Therm. Spray Technol., 2017, 26, p 360-370. https://doi.org/10.1007/s11666-017-0528-710.1007/s11666-017-0528-7 ↗
21. M.B. Toloczko, M.L. Hamilton, and G.E. Lucas, Ductility Correlations Between Shear Punch and Uniaxial Tensile Test Data, J. Nucl. Mater., 2000, 283, p 987-991. https://doi.org/10.1016/S0022-3115(00)00198-710.1016/S0022-3115(00)00198-7 ↗
22. A. Papyrin, V. Kosarev, S. Klinkov, A. Alkhimov, and V.M. Fomin, Cold Spray Technology, Elsevier, 2006.
23. J. Villafuerte (Ed.) Modern cold spray: materials, process, and applications. Springer (2015)10.1007/978-3-319-16772-5 ↗
24. Y.J. Li, X.T. Luo, and C.J. Li, Improving Deposition Efficiency and Inter-Particle Bonding of Cold Sprayed Cu through Removing the Surficial Oxide Scale of the Feedstock Powder, Surf. Coat. Technol., 2021, 407, 126709. https://doi.org/10.1016/j.surfcoat.2020.12670910.1016/j.surfcoat.2020.126709 ↗
25. F. Gärtner, T. Stoltenhoff, J. Voyer, H. Kreye, S. Riekehr, and M. Koçak, Mechanical Properties of Cold-Sprayed and Thermally Sprayed Copper Coatings, Surf. Coat. Technol., 2006, 200(24), p 6770-6782. https://doi.org/10.1016/j.surfcoat.2005.10.00710.1016/j.surfcoat.2005.10.007 ↗
26. V. Menon, CJr. Aranas, and G. Saha, Cold Spray Additive Manufacturing of Copper-Based Materials: Review and Future Directions, Mater. Sci. Addit. Manuf., 2022, 1(2), p 1-20.
27. Y. Zou, Cold Spray Additive Manufacturing: Microstructure Evolution and Bonding Features, Acc. Mater. Res., 2021, 2(11), p 1071-1081.10.1021/accountsmr.1c00138 ↗
28. I. Kotsakis, D. Poirier, J.D. Giallonardo, and S. Yue, Influence of Feedstock Powder Characteristics on the Response to Heat Treatment of Cold-Sprayed Copper Coatings, J. Therm. Spray Technol., 2025, 34(2), p 597-610. https://doi.org/10.1007/s11666-024-01865-610.1007/s11666-024-01865-6 ↗
29. Y. Li, Y. Wei, X. Luo, C. Li, and N. Ma, Correlating Particle Impact Condition with Microstructure and Properties of the Cold-Sprayed Metallic Deposits, J. Mater. Sci. Technol., 2020, 40, p 185-195. https://doi.org/10.1016/j.jmst.2019.09.02310.1016/j.jmst.2019.09.023 ↗
30. J. Tam, B. Yu, W. Li, D. Poirier, J.G. Legoux, J.D. Giallonardo, J. Howe, and U. Erb, The Effect of Annealing on Trapped Copper Oxides in Particle-Particle Interfaces of Cold-Sprayed Cu Coatings, Scripta Mater., 2022, 208, 114333. https://doi.org/10.1016/j.scriptamat.2021.11433310.1016/j.scriptamat.2021.114333 ↗
31. A. List, C. Huang, L. Wiehler, C.P. Gieseler, M. Schulze, F. Gärtner, and T. Klassen, Influence of Ductility on Fracture in Tensile Testing of Cold Gas Sprayed Deposits, J. Therm. Spray Technol., 2023, 32(6), p 1780-1795. https://doi.org/10.1007/s11666-023-01598-y10.1007/s11666-023-01598-y ↗
32. C. Huang, M. Arseenko, L. Zhao, Y. Xie, A. Elsenberg, W. Li, F. Gärtner, A. Simar, and T. Klassen, Property Prediction and Crack Growth Behavior in Cold Sprayed Cu Deposits, Mater. Des., 2021, 206, 109826. https://doi.org/10.1016/j.matdes.2021.10982610.1016/j.matdes.2021.109826 ↗
33. S. He, W. Wan, C. Huang, and W. Li, The Role of Annealing Temperature on Fracture of Cold-Sprayed Copper Deposits: Toward Damage-Tolerant Additive Manufacturing Process, J. Mater. Res. Technol., 2025, 37, p 3507-3517. https://doi.org/10.1016/j.jmrt.2025.07.04510.1016/j.jmrt.2025.07.045 ↗
34. T. Schmidt, H. Assadi, F. Gärtner, H. Richter, T. Stoltenhoff, H. Kreye, and T. Klassen, From Particle Acceleration to Impact and Bonding in Cold Spraying, J. Therm. Spray Technol., 2009, 18, p 794-808. https://doi.org/10.1007/s11666-009-9357-710.1007/s11666-009-9357-7 ↗
35. B. Yu, J. Tam, W. Li, H.J. Cho, J.G. Legoux, D. Poirier, J.D. Giallonardo, and U. Erb, Microstructural and Bulk Properties Evolution of Cold-Sprayed Copper Coatings after Low Temperature Annealing, Materialia, 2019, 7, 100356. https://doi.org/10.1016/j.mtla.2019.10035610.1016/j.mtla.2019.100356 ↗
36. E. Calla, D.G. McCartney, and P.H. Shipway, Effect of Deposition Conditions on the Properties and Annealing Behavior of Cold-Sprayed Copper, J. Therm. Spray Technol., 2006, 15, p 255-262. https://doi.org/10.1361/105996306X10819210.1361/105996306X108192 ↗
37. B. Guerreiro, P. Vo, D. Poirier, J.G. Legoux, X. Zhang, and J.D. Giallonardo, Factors Affecting the Ductility of Cold-Sprayed Copper Coatings, J. Therm. Spray Technol., 2020, 29, p 630-641. https://doi.org/10.1007/s11666-020-00993-z10.1007/s11666-020-00993-z ↗
38. R. Singh, J. Kondás, C. Bauer, J. Cizek, J. Medricky, S. Csaki, and D. Melzer, Bulk-Like Ductility of Cold Spray Additively Manufactured Copper in the As-Sprayed State, Addit. Manuf. Lett., 2022, 3, 100052. https://doi.org/10.1016/j.addlet.2022.10005210.1016/j.addlet.2022.100052 ↗
39. C. Chen, Y. Xie, S. Yin, W. Li, X. Luo, X. Xie, R. Zhao, C. Deng, J. Wang, H. Liao, and M. Liu, Ductile and High Strength Cu Fabricated by Solid-State Cold Spray Additive Manufacturing, J. Mater. Sci. Technol., 2023, 134, p 234-243. https://doi.org/10.1016/j.jmst.2022.07.00310.1016/j.jmst.2022.07.003 ↗
40. I. Astm. ASTM E8/E8M-16a: standard test methods for tension testing of metallic materials. West Conshohocken, PA, USA: ASTM International (2016)
41. https://www.microtrac.com/products/particle-size-shape-analysis/laser-diffraction/sync/
42. D. Poirier, J.G. Legoux, P. Vo, B. Blais, J.D. Giallonardo, and P.G. Keech, Powder Development and Qualification for High-Performance Cold Spray Copper Coatings on Steel Substrates, J. Therm. Spray Technol., 2019, 28(3), p 444-459. https://doi.org/10.1007/s11666-019-00833-910.1007/s11666-019-00833-9 ↗
43. L. Pouliot, CSM eVOLUTION Product Manual, TECNAR Automation Ltd, Saint-Bruno-de-Montarville (2013)
44. R.D. Vengrenovitch, On the Ostwald Ripening Theory, Acta Metall., 1982, 30(6), p 1079-1086. https://doi.org/10.1016/0001-6160(82)90004-910.1016/0001-6160(82)90004-9 ↗
45. P.W. Voorhees, The Theory of Ostwald Ripening, J. Stat. Phys., 1985, 38, p 231-252. https://doi.org/10.1007/BF0101786010.1007/BF01017860 ↗
46. R.E. Reed-Hill and R. Abbaschian, Physical Metallurgy Principles, 3rd ed. PWS-KENT, Boston, 1992.
47. N.P. Gurao, R. Kapoor, and S. Suwas, Effect of Strain Rate on Evolution of the Deformation Microstructure and Texture in Polycrystalline Copper and Nickel, Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2010, 41(11), p 2794-2804. https://doi.org/10.1007/s11661-010-0360-x10.1007/s11661-010-0360-x ↗
48. A. Zergani, H. Mirzadeh, and R. Mahmudi, Finite Element Analysis of Plastic Deformation in Shear Punch Test, Mater. Lett., 2021, 284, 128953. https://doi.org/10.1016/j.matlet.2020.12895310.1016/j.matlet.2020.128953 ↗
49. M. Afifeh, S.J. Hosseinipour, and R. Jamaati, High-Strength and High-Conductivity Nanograined Copper Fabricated by Partial Homogenization and Asymmetric Rolling, Mater. Sci. Eng. A, 2019 https://doi.org/10.1016/j.msea.2019.13845110.1016/j.msea.2019.138451 ↗
50. A.A. Tiamiyu, X. Chen, E.L. Pang, Y. Sun, J. Lienhard, J.M. LeBeau, K.A. Nelson, and C.A. Schuh, Oxide Layer Delamination: An Energy Dissipation Mechanism during High-Velocity Microparticle Impacts, Appl. Surf. Sci., 2022, 574, 151673. https://doi.org/10.1016/j.apsusc.2021.15167310.1016/j.apsusc.2021.151673 ↗
51. W.Y. Li, C.J. Li, and H. Liao, Significant Influence of Particle Surface Oxidation on Deposition Efficiency, Interface Microstructure and Adhesive Strength of Cold-Sprayed Copper Coatings, Appl. Surf. Sci., 2010, 256(16), p 4953-4958.10.1016/j.apsusc.2010.03.008 ↗
52. H. Assadi, F. Gärtner, T. Stoltenhoff, and H. Kreye, Bonding Mechanism in Cold Gas Spraying, Acta Mater., 2003, 51(15), p 4379-4394. https://doi.org/10.1016/S1359-6454(03)00274-X10.1016/S1359-6454(03)00274-X ↗