Corrosion Resistance of Flame-Sprayed CF/PEEK Coatings on 316L Stainless Steel for Marine Applications
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Tribology and Wear Analysis · Flame retardant materials and properties · Fiber-reinforced polymer composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. R. Liu, Y. Song, Y. Cui, F. Meng, L. Liu, and F. Wang, Corrosion of High-Strength Steel in 3.5% NaCl Solution under Hydrostatic Pressure: Understanding Electrochemical Corrosion with Tensile Stress Coupling, Corros. Sci., 2023. https://doi.org/10.1016/j.corsci.2023.11120410.1016/j.corsci.2023.111204 ↗
2. S.S. Xin and M.C. Li, Electrochemical Corrosion Characteristics of Type 316L Stainless Steel in Hot Concentrated Seawater, Corros. Sci., 2014, 81, p 96–101.10.1016/j.corsci.2013.12.004 ↗
3. L. Tan, Z. Wang, and Y. Ma, Tribocorrosion Behavior and Degradation Mechanism of 316L Stainless Steel in Typical Corrosive Media, Acta Metall. Sin-Engl., 2021, 34(6), p 813–824.10.1007/s40195-020-01182-1 ↗
4. H. Zeng, Y. Yang, M. Zeng, and M. Li, Effect of Dissolved Oxygen on Electrochemical Corrosion Behavior of 2205 Duplex Stainless Steel in Hot Concentrated Seawater, J. Mater. Sci. Technol., 2021, 66, p 177–185.10.1016/j.jmst.2020.06.030 ↗
5. J.H. Zhu, Q. Li, C. Pei, H. Yu, and F. Xing, Evolution Mechanism of Carbon Fiber Anode Properties for Functionalized Applications: Impressed Current Cathodic Protection and Structural Strengthening, Engineering, 2025 https://doi.org/10.1016/j.eng.2025.03.00510.1016/j.eng.2025.03.005 ↗
6. L. Shen, L. Miao, Y. Zhang, W. Xie, X. Lu, K. Wang, and W. Zhao, Constructing Bioinspired Mineralization Interface Between Carbon Fiber and Epoxy Coating with Robust Anti-Corrosion and Anti-Erosion Performances, Carbon, 2025 https://doi.org/10.1016/j.carbon.2025.12030210.1016/j.carbon.2025.120302 ↗
7. D. Jang, M. Lee, J. Choi, S. Cho, and S. Lee, Strategies for the Production of PAN-Based Carbon Fibers with High Tensile Strength, Carbon, 2022, 186, p 644–677.10.1016/j.carbon.2021.10.061 ↗
8. Y. Chen, Y. Wu, and W. Zhao, Constructing PANI@CF Hybrids Enhanced Epoxy Coatings with Integrated Functionalities of Interfacial Enhancement, Erosion Wear Resistance and Anti-Corrosion, Chem. Eng. J., 2024 https://doi.org/10.1016/j.cej.2024.15093310.1016/j.cej.2024.150933 ↗
9. S. Ji, C. Sun, J. Zhao, and F. Liang, Comparison and Analysis on Mechanical Property and Machinability About Polyetheretherketone and Carbon-Fibers Reinforced Polyetheretherketone, Materials, 2015, 8(7), p 4118–4130.10.3390/ma8074118 ↗
10. X. Ling, X. Jing, C. Zhang, and S. Chen, Polyether Ether Ketone (PEEK) Properties and Its Application Status, IOP Conf. Ser Earth Environ. Sci., 2020 https://doi.org/10.1088/1755-1315/453/1/01208010.1088/1755-1315/453/1/012080 ↗
11. J. Zhang, V.S. Chevali, H. Wang, and C. Wang, Current Status of Carbon Fibre and Carbon Fibre Composites Recycling, Compos. Part B Eng., 2020 https://doi.org/10.1016/j.compositesb.2020.10805310.1016/j.compositesb.2020.108053 ↗
12. E. Pakdel, S. Kashi, R. Varley, and X. Wang, Recent Progress in Recycling Carbon Fibre reinforced Composites and Dry Carbon Fibre Wastes, Resour. Conserv. Recycl., 2021 https://doi.org/10.1016/j.resconrec.2020.10534010.1016/j.resconrec.2020.105340 ↗
13. A.M. Almushaikeh, S.O. Alaswad, and M.S. Alsuhybani, Manufacturing of Carbon Fiber Reinforced Thermoplastics and Its Recovery of Carbon Fiber: A Review, Polym. Test., 2023 https://doi.org/10.1016/j.polymertesting.2023.10802910.1016/j.polymertesting.2023.108029 ↗
14. J. Deng, L. Xu, J. Liu, J. Peng, Z. Han, Z. Shen, and S. Guo, Efficient Method of Recycling Carbon Fiber from the Waste of Carbon Fiber Reinforced Polymer Composites, Polym. Degrad. Stab., 2020 https://doi.org/10.1016/j.polymdegradstab.2020.10941910.1016/j.polymdegradstab.2020.109419 ↗
15. L. Zhang, W. Liu, H. Jiang, X. Zhang, Y. Shang, C. Jiang, X. Wang, G. Qi, B. Li, P. Xu, and J. Qiao, Upcycling of Carbon Fiber-Reinforced Polymer Composites, Compos. Sci. Technol., 2023 https://doi.org/10.1016/j.compscitech.2022.10982410.1016/j.compscitech.2022.109824 ↗
16. F. Li, Y. Hu, X. Hou, X. Hu, and D. Jiang, Thermal, Mechanical, and Tribological Properties of Short Carbon Fibers/PEEK Composites, High Perform. Polym., 2017, 30(6), p 657–666.10.1177/0954008317715313 ↗
17. J. Hu, Z. Jiao, X. Han, J. Liu, M. Ma, J. Jiang, Y. Hou, X. Wang, C. Feng, and Y. Ma, Facile Synthesis of FeNi Nanoparticle-Loaded Carbon Nanocomposite Fibers for Enhanced Microwave Absorption Performance, J. Mater. Sci. Technol., 2024, 175, p 141–152.10.1016/j.jmst.2023.07.053 ↗
18. K. Zhang, Y. Li, H. Zhou, M. Nie, Q. Wang, and Z. Hua, Polyurethane/Carbon Fiber Composite Tubular Electrode Featuring Three-Dimensional Interpenetrating Conductive Network, Carbon, 2018, 139, p 999–1009.10.1016/j.carbon.2018.08.015 ↗
19. Y. Li, L. Wei, Z. Man, S. Liu, S. Wang, and M. Lei, Mechanical and Tribological Properties of Carbon Fiber-Reinforced Polyetheretherketone Composite Coatings by Flame-Spraying Method, Polym. Composites., 2022, 43(11), p 8443–8457.10.1002/pc.27015 ↗
20. H. Lyu, N. Jiang, Y. Li, and D. Zhang, Enhancing CF/PEEK Interfacial Adhesion by Modified PEEK Grafted with Carbon Nanotubes, Compos. Sci. Technol., 2021 https://doi.org/10.1016/j.compscitech.2021.10883110.1016/j.compscitech.2021.108831 ↗
21. T. Yan, F. Yan, S. Li, M. Li, Y. Liu, M. Zhang, L. Jin, L. Shang, L. Liu, and Y. Ao, Interfacial Enhancement of CF/PEEK Composites by Modifying Water-Based PEEK-NH2 Sizing Agent, Compos. Part B Eng., 2020 https://doi.org/10.1016/j.compositesb.2020.10825810.1016/j.compositesb.2020.108258 ↗
22. D. Gaitanelis, C. Worrall, and M. Kazilas, Influence of Rapid High-Temperature Processing on the Interface of CF/PEEK, A Quick and Effective Method for Enhancing the IFSS, Compos. Sci. Technol., 2024 https://doi.org/10.1016/j.compscitech.2024.11056410.1016/j.compscitech.2024.110564 ↗
23. T. Ren, G. Zhu, and C. Zhang, Improvement of the Interfacial Properties of CF/PEEK Composites by Introducing Aminated Polyphenylene Sulphide (PPS-NH2) as a Sizing Agent, Polym. Compos., 2022, 43(12), p 8890–8903.10.1002/pc.27070 ↗
24. S. Zhong, Z. Dong, Y. Xiao, Y. Li, L. Pei, S. Wang, and G. Wang, The Impact of Crystalline PEEK Sizing Agent on the Interfacial Crystallization Behavior and Interfacial Properties of Carbon Fiber Reinforced PEEK Composites, Compos. Part B Eng., 2025 https://doi.org/10.1016/j.compositesb.2025.11230710.1016/j.compositesb.2025.112307 ↗
25. C. Lu, C. Xu, X. Lu, W. Ji, S. Li, J. Ma, and S. Ba, Comparison and Analysis of Measurements for Crystallinity of PEEK and CF/PEEK Composites, Polym. Compos., 2024, 46(8), p 7120–7131.10.1002/pc.29418 ↗
26. G. Zhang, H. Liao, M. Cherigui, P. Davim, and C. Coddet, Effect of Crystalline Structure on the Hardness and Interfacial Adherence of Flame Sprayed Poly(Ether–Ether–Ketone) Coatings, Eur. Polym. J., 2007, 43(3), p 1077–1082.10.1016/j.eurpolymj.2006.12.039 ↗
27. H. Uematsu, T. Aratama, and A. Yamaguchi, Influence of Polyetheretherketone Radicals on Interfacial Interaction with Carbon Fiber and Crystal Formation of Polyetheretherketone at the Interphase, Surf. Interfaces, 2024 https://doi.org/10.1016/j.surfin.2024.10440910.1016/j.surfin.2024.104409 ↗
28. X. Zhang, R. Flanigan, G. Kort, R.H. Colby, and A.M. Rhoades, Isothermal Crystallization of Poly(Ether Ether Ketone)/Carbon Fiber Composites, Compos. Part B Eng., 2025 https://doi.org/10.1016/j.compositesb.2025.11238610.1016/j.compositesb.2025.112386 ↗
29. L. Simonin and H. Liao, Characterization of Flame-Sprayed PEEK Coatings by FTIR-ATR, DSC and Acoustic Microscopy, Macromol. Mater. Eng., 2000, 283(1), p 153–162.10.1002/1439-2054(20001101)283:1<153::AID-MAME153>3.0.CO;2-# ↗
30. H. Kim, K. Praveen, M. Lee, and J. Lee, Performance-Tunable Thermal Barrier Coating for Carbon Fiber-Reinforced Plastic Composites Via Flame Spraying, Compos. Part B Eng., 2024 https://doi.org/10.1016/j.compositesb.2024.11184210.1016/j.compositesb.2024.111842 ↗
31. A. Soveja, P. Sallamand, H. Liao, and S. Costil, Improvement of Flame Spraying PEEK Coating Characteristics Using Lasers, J. Mater. Process. Technol., 2011, 211(1), p 12–23.10.1016/j.jmatprotec.2010.08.002 ↗
32. L. Bairi, D. Bairagi, P. Duley, and S. Mandal, Effect of Long-Term Immersion on the Corrosion and Passivation Behavior of Lean Duplex Stainless Steel 2101 in 3.5 wt% NaCl Solution, Met. Mater. Int., 2022, 29(7), p 1923–1939.10.1007/s12540-022-01342-1 ↗
33. Y. Wang, X. Mu, J. Dong, A. Umoh, and W. Ke, Insight into Atmospheric Corrosion Evolution of Mild Steel in a Simulated Coastal Atmosphere, J. Mater. Process. Technol., 2021, 76, p 41–50.
34. W. Lv, C. Pan, W. Su, Z. Wang, S. Liu, and C. Wang, Atmospheric Corrosion Mechanism of 316 Stainless Steel in Simulated Marine Atmosphere, Corros. Eng. Sci. Technol., 2016, 51(3), p 155–162.10.1179/1743278215Y.0000000042 ↗
35. J. Jiang, Y. Wang, Y. Chi, X. Mao, Y. Dong, Y. Yang, J. He, and X. Lu, Wear and Corrosion Resistance of TiN/PEEK Composite Coatings Fabricated by Gas Twin-Tunnel Plasma Spraying, J. Therm. Spray Technol., 2023, 32(5), p 1273–1285.10.1007/s11666-022-01527-5 ↗
36. C. Lima, M. Mojena, C. Rovere, N. Souza, and H. Fals, Slurry Erosion and Corrosion Behavior of Some Engineering Polymers Applied by Low-Pressure Flame Spray, J. Mater. Eng. Perform., 2016, 25(11), p 4911–4918.10.1007/s11665-016-2317-8 ↗
37. S. Tailor, N. Vashistha, A. Modi, and S.C. Modi, One-Step Fabrication of Thermal Sprayed Polymer Coating on Metals, Mater. Res. Express, 2020, 7(1), p 016425.10.1088/2053-1591/ab6a4f ↗
38. Y. Zhang, Y. Sun, X. Fan, B. Liao, C. Deng, S. Li, C. Wang, Y. Xv, K. Li, and Y. Lv, Corrosion Behavior of WC-NiMoCrFeCo Coating in Seawater Environment: Positive Corrosion Inhibition of a Novel Dynamic Reaction Product, Chem. Eng. J., 2025 https://doi.org/10.1016/j.cej.2025.16056810.1016/j.cej.2025.160568 ↗
39. T. Ge, W. Zhao, X. Wu, X. Lan, Y. Zhang, Y. Qiang, and Y. He, Incorporation of Electroconductive Carbon Fibers to Achieve Enhanced Anti-Corrosion Performance of Zinc Rich Coatings, J. Colloid Interface Sci., 2020, 567, p 113–125.10.1016/j.jcis.2020.02.002 ↗
40. Q. Zhao, W. Zhao, and Y. Wu, Constructing Bi-Functional Ce-MOF on Carbon Fiber Endowing Epoxy Coating with Excellent Anti-Corrosion and Erosion Wear Resistance, Carbon, 2023 https://doi.org/10.1016/j.carbon.2023.11837410.1016/j.carbon.2023.118374 ↗
41. A. Verma, R. Bandyopadhyay, C.S. Tiwary, B.K. Das, and J. Bhattacharya, Engineering Defect Concentration and Morphology of Green Graphene for the Development of Hard and Anticorrosive Coating on Carbon Steel, Corros. Sci., 2023, 224, p 111523.10.1016/j.corsci.2023.111523 ↗
42. Z.Y. Xue, X.J. Li, J.H. Chu, M.M. Li, D.N. Zou, and L.B. Tong, Greatly Enhanced Corrosion/Wear Resistances of Epoxy Coating for Mg Alloy through a Synergistic Effect Between Functionalized Graphene and Insulated Blocking Layer, J. Magnesium Alloys, 2024, 12(1), p 332–344.10.1016/j.jma.2022.04.007 ↗
43. Y. Xia, W. Gu, and Q. Zhang, Enhancing Resistance to Corrosion and Fouling Using Epoxy Coatings with Superhydrophobic Cells, Adv. Funct. Mater., 2024 https://doi.org/10.1002/adfm.20241237910.1002/adfm.202412379 ↗
44. S. Tang, T. Wang, P. Xu, W. Ge, J. Chen, H. Guo, Z. Feng, B. Lei, P. Zhang, and G. Meng, Maze Effect or Antimaze Effect: The Double Effect of Modified 2D Fillers Ti(3)C(2)T(x) on the Properties of Waterborne Polyurethane Coatings, ACS Appl. Mater. Interfaces, 2025, 17(14), p 21745–22175.10.1021/acsami.4c23009 ↗