Abrasion and Cavitation Erosion Properties of Laser-Cladded Titanium Carbide-Reinforced CuNi25-Based Composite Layers
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: High Entropy Alloys Studies · Metallurgy and Material Science · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (72)
Show source-provided references
1. O.O. Ekerenam, A.-L. Ma, Y.-G. Zheng, S.-Y. He and P.C. Okafor, Evolution of the Corrosion Product Film and Its Effect on the Erosion–Corrosion Behavior of Two Commercial 90Cu–10Ni Tubes in Seawater, Acta Metall. Sin. (Engl. Lett.), 2018, 31(11), p 1148–1170. https://doi.org/10.1007/s40195-018-0745-110.1007/s40195-018-0745-1 ↗
2. Y. Wang, Y. Wu, S. Hong, J. Cheng and S. Zhu, Cavitation Erosion Behavior of HVAF-Sprayed Cu-Based Glassy Composite Coatings in NaCl Solution, Intermetallics, 2024, 168, 108266. https://doi.org/10.1016/j.intermet.2024.10826610.1016/j.intermet.2024.108266 ↗
3. D. Li, Y. Kang, X. Wang, X. Ding and Z. Fang, Effects of Nozzle Inner Surface Roughness on the Cavitation Erosion Characteristics of High Speed Submerged Jets, Exp. Therm. Fluid Sci., 2016, 74, p 444–452. https://doi.org/10.1016/j.expthermflusci.2016.01.00910.1016/j.expthermflusci.2016.01.009 ↗
4. A. Karimi and J.L. Martin, Cavitation Erosion of Materials, Int. Met. Rev., 1986, 31(1), p 1–26. https://doi.org/10.1179/imtr.1986.31.1.110.1179/imtr.1986.31.1.1 ↗
5. K. Peng, S. Tian, G. Li, Z. Huang and Z. Zhang, Cavitation in Water Jet Under High Ambient Pressure Conditions, Exp. Therm. Fluid Sci., 2017, 89, p 9–18. https://doi.org/10.1016/j.expthermflusci.2017.07.02110.1016/j.expthermflusci.2017.07.021 ↗
6. P. Sarkar, G. Ghigliotti, J.-P. Franc and M. Fivel, Mechanism of Material Deformation During Cavitation Bubble Collapse, J. Fluids Struct., 2021, 105, 103327. https://doi.org/10.1016/j.jfluidstructs.2021.10332710.1016/j.jfluidstructs.2021.103327 ↗
7. K.-H. Kim, G. Chahine, J.-P. Franc, and A. Karimi Eds., Advanced Experimental and Numerical Techniques for Cavitation Erosion Prediction, Springer, Dordrecht, 2014 https://doi.org/10.1007/978-94-017-8539-610.1007/978-94-017-8539-6 ↗
8. J. Ke, X.-B. Liu, M. Wang, J. Liang, Y.-S. Luo and D.-Q. Chen, Investigation of Wear Behaviors from Room Temperature to 500 °C of in-Situ Synthesized Ceramics Reinforced Composite Coating on TA2 Alloy by Laser Cladding, J. Mater. Res. Technol., 2020, 9(3), p 6397–6408. https://doi.org/10.1016/j.jmrt.2020.04.02310.1016/j.jmrt.2020.04.023 ↗
9. P. Zhang, X. Liu and H. Yan, Phase Composition, Microstructure Evolution and Wear Behavior of Ni-Mn-Si Coatings on Copper by Laser Cladding, Surf. Coat. Technol., 2017, 332, p 504–510. https://doi.org/10.1016/j.surfcoat.2017.08.07210.1016/j.surfcoat.2017.08.072 ↗
10. Z.-Y. Zhou, X.-B. Liu, S.-G. Zhuang, X.-H. Yang, M. Wang and C.-F. Sun, Preparation and High Temperature Tribological Properties of Laser In-Situ Synthesized Self-Lubricating Composite Coatings Containing Metal Sulfides on Ti6Al4V Alloy, Appl. Surf. Sci., 2019, 481, p 209–218. https://doi.org/10.1016/j.apsusc.2019.03.09210.1016/j.apsusc.2019.03.092 ↗
11. R. Cottam, V. Luzin, H. Moody, D. Edwards, A. Majumdar, Y.C. Wong, J. Wang and M. Brandt, The Role of Microstructural Characteristics in the Cavitation Erosion Behaviour of Laser Melted and Laser Processed Nickel-Aluminium Bronze, Wear, 2014, 317(1), p 56–63. https://doi.org/10.1016/j.wear.2014.05.00210.1016/j.wear.2014.05.002 ↗
12. Y. Chang, Z. Liu, R. Gan, H. Xiao and Y. Shen, Cavitation Erosion Characterization of Cu-Ni Alloy Laser Cladding Layer Under the Action of High-Pressure Water Jet, J. Alloys Compd., 2025, 1020, 179325. https://doi.org/10.1016/j.jallcom.2025.17932510.1016/j.jallcom.2025.179325 ↗
13. A.K. Rampal, A. Singla, V. Bansal, N. Singh, D.K. Khanna, J. Goyal, J. Singla and S. Tailor, Development, Characterization, and Cavitation Erosion Analysis of High Velocity Oxy-Fuel (HVOF) Sprayed TiC and (70Cu-30Ni)-Cr Based Composite Coatings on SS316 Steel, Tribol. Int., 2023, 186, 108621. https://doi.org/10.1016/j.triboint.2023.10862110.1016/j.triboint.2023.108621 ↗
14. F. Long, X. Guo, K. Song, S. Jia, V. Yakubov, S. Li and S. Liang, Enhanced Arc Erosion Resistance of TiB2/Cu Composites Reinforced with the Carbon Nanotube Network Structure, Mater. Des., 2019, 183, 108136. https://doi.org/10.1016/j.matdes.2019.10813610.1016/j.matdes.2019.108136 ↗
15. X.-B. Liu, X.-J. Meng, H.-Q. Liu, G.-L. Shi, S.-H. Wu, C.-F. Sun, M.-D. Wang and L.-H. Qi, Development and Characterization of Laser Clad High Temperature Self-Lubricating Wear Resistant Composite Coatings on Ti–6Al–4V Alloy, Mater. Des., 2014, 55, p 404–409. https://doi.org/10.1016/j.matdes.2013.09.03810.1016/j.matdes.2013.09.038 ↗
16. S. Zhou, X. Dai, M. Xie, S. Zhao and T.B. Sercombe, Phase Separation and Properties of Cu-Fe-Cr-Si-C Immiscible Nanocomposite by Laser Induction Hybrid Cladding, J. Alloy. Compd., 2018, 741, p 482–488. https://doi.org/10.1016/j.jallcom.2018.01.18410.1016/j.jallcom.2018.01.184 ↗
17. J. Yao, J. Zhang, G. Wu, L. Wang, Q. Zhang and R. Liu, Microstructure and Wear Resistance of Laser Cladded Composite Coatings Prepared from Pre-alloyed WC-NiCrMo Powder with Different Laser Spots, Opt. Laser Technol., 2018, 101, p 520–530. https://doi.org/10.1016/j.optlastec.2017.12.00710.1016/j.optlastec.2017.12.007 ↗
18. P. Farahmand and R. Kovacevic, Corrosion and Wear Behavior of Laser Cladded Ni–WC Coatings, Surf. Coat. Technol., 2015, 276, p 121–135. https://doi.org/10.1016/j.surfcoat.2015.06.03910.1016/j.surfcoat.2015.06.039 ↗
19. S.W. Huang, M. Samandi and M. Brandt, Abrasive Wear Performance and Microstructure of Laser Clad WC/Ni Layers, Wear, 2004, 256(11–12), p 1095–1105. https://doi.org/10.1016/S0043-1648(03)00526-X10.1016/S0043-1648(03)00526-X ↗
20. J. Li, H. Zhang, J. Zhang, M. Wang, Y. Jiao, S. Du, E. Liu, H. Cai, H. Du, S. Xu and B. Li, TiC-Reinforced Austenitic Stainless Steel Laser Cladding Layer on 27SiMn Steel Surface: A Comparative Study of Microstructure, Corrosion, Hardness, and Wear Performance, J. Mater. Eng. Perform., 2025, 34(13), p 13318–13328. https://doi.org/10.1007/s11665-024-10063-y10.1007/s11665-024-10063-y ↗
21. F. Ye, Y. Yang, Z. Lou, L. Feng, L. Guo and J. Yu, Microstructure and Wear Resistance of TiC Reinforced AlCoCrFeNi2.1 Eutectic High Entropy Alloy Layer Fabricated by Micro-plasma Cladding, Mater. Lett., 2021, 284, 128859. https://doi.org/10.1016/j.matlet.2020.12885910.1016/j.matlet.2020.128859 ↗
22. M. Duraiselvam, R. Galun, V. Wesling, B.L. Mordike, R. Reiter, J. Oligmüller and G. Buvanashekaran, Cavitation Erosion Resistance of Ti6Al4V Laser Alloyed with TiC-Reinforced Dual Phase Intermetallic Matrix Composites, Mater. Sci. Eng. A, Struct. Mater. Prop. Microstruct. Process., 2007, 454–455, p 63–68. https://doi.org/10.1016/j.msea.2006.11.00210.1016/j.msea.2006.11.002 ↗
23. Z. Li, H. Yan, P. Zhang, J. Guo, Z. Yu and J.W. Ringsberg, Improving Surface Resistance to Wear and Corrosion of Nickel-Aluminum Bronze by Laser-Clad TaC/Co-Based Alloy Composite Coatings, Surf. Coat. Technol., 2021, 405, 126592. https://doi.org/10.1016/j.surfcoat.2020.12659210.1016/j.surfcoat.2020.126592 ↗
24. M. Szala, L. Łatka, M. Walczak and M. Winnicki, Comparative Study on the Cavitation Erosion and Sliding Wear of Cold-Sprayed Al/Al2O3 and Cu/Al2O3 Coatings, and Stainless Steel, Aluminium Alloy, Copper and Brass, Metals Multidiscip. Digit. Publish. Inst., 2020, 10(7), 856. https://doi.org/10.3390/met1007085610.3390/met10070856 ↗
25. M. Ali, A.M. Sadoun, M. Elmahdy, G. Abouelmagd and A.A. Mazen, Development and Performance Analysis of Novel In Situ Cu–Ni/Al2O3 Nanocomposites, Ceram. Int., 2022, 48(16), p 22672–22680. https://doi.org/10.1016/j.ceramint.2022.01.28710.1016/j.ceramint.2022.01.287 ↗
26. X. Shang, Q. Liu, Y. Guo, K. Ding, T. Liao and F. Wang, Nano-TiC reinforced [Cr–Fe4Co4Ni4]Cr3 High-Entropy-Alloy Composite Coating Fabricated by Laser Cladding, J. Mater. Res. Technol., 2022, 21, p 2076–2088. https://doi.org/10.1016/j.jmrt.2022.10.04810.1016/j.jmrt.2022.10.048 ↗
27. Y. Han, W. Zhang, S. Sun, H. Chen and X. Ran, Microstructure, Hardness, and Corrosion Behavior of TiC-Duplex Stainless Steel Composites Fabricated by Spark Plasma Sintering, J. Mater. Eng. Perform., 2017, 26(8), p 4056–4063. https://doi.org/10.1007/s11665-017-2840-210.1007/s11665-017-2840-2 ↗
28. L. Huang, Y. Pan, J. Zhang, A. Liu, Y. Du and F. Luo, Densification, Microstructure and Mechanical Performance of TiC/Fe Composites by Spark Plasma Sintering, J. Mater. Res. Technol., 2020, 9(3), p 6116–6124. https://doi.org/10.1016/j.jmrt.2020.04.01410.1016/j.jmrt.2020.04.014 ↗
29. M. Duraiselvam, R. Galun, V. Wesling, B.L. Mordike, R. Reiter and J. Oligmüller, Cavitation Erosion Resistance of AISI 420 Martensitic Stainless Steel Laser-Clad with Nickel Aluminide Intermetallic Composites and Matrix Composites with TiC Reinforcement, Surf. Coat. Technol., 2006, 201(3–4), p 1289–1295. https://doi.org/10.1016/j.surfcoat.2006.01.05410.1016/j.surfcoat.2006.01.054 ↗
30. H.F. Zhang, L. Wang, S. Zhang, C.L. Wu, C.H. Zhang, X.Y. Sun and J. Chen, An Investigation on Wear and Cavitation Erosion-Corrosion Characteristics of the TiC Modified Fe-Based Composite Coating via Laser Cladding, J. Mater. Res. Technol., 2023, 26, p 8440–8455. https://doi.org/10.1016/j.jmrt.2023.09.17710.1016/j.jmrt.2023.09.177 ↗
31. B. AlMangour, D. Grzesiak and J.-M. Yang, Selective Laser Melting of TiC Reinforced 316L Stainless Steel Matrix Nanocomposites: Influence of Starting TiC Particle Size and Volume Content, Mater. Des., 2016, 104, p 141–151. https://doi.org/10.1016/j.matdes.2016.05.01810.1016/j.matdes.2016.05.018 ↗
32. T.S. Kumar, S. Shalini, R. Čep and K. Kalita, Synergetic Effect of TiC Particles on Cavitation Erosion Resistance of AZ31-TiC surface Composites, Heliyon, 2025, 11(4), e42602. https://doi.org/10.1016/j.heliyon.2025.e4260210.1016/j.heliyon.2025.e42602 ↗
33. W. Gong, Z. Zhou, Y. Zhang, X. Zhang and S. Du, Effect of TiC on the Microstructure and Properties of FeCoNiCrMo High-Entropy Alloy Coatings by Plasma Cladding, J. Therm. Spray Technol., 2025, 34(1), p 381–393. https://doi.org/10.1007/s11666-024-01903-310.1007/s11666-024-01903-3 ↗
34. H. Wu, L. Wang, S. Zhang, C.L. Wu, C.H. Zhang and X.Y. Sun, Corrosion and Cavitation Erosion Behaviors of Laser Clad FeNiCoCr High-Entropy Alloy Coatings with Different Types of TiC Reinforcement, Surf. Coat. Technol., 2023, 471, 129910. https://doi.org/10.1016/j.surfcoat.2023.12991010.1016/j.surfcoat.2023.129910 ↗
35. C. Zhu, I. Fordyce, S.D. Sun, M. Annasamy, D. Fabijanic, K. Short, A. Paradowska, M. Leary, M. Brandt and M. Easton, Effect of Ti and TiC Additions on the Microstructure and Wear Resistance of High Chromium White Irons Produced by Laser Directed Energy Deposition, Wear, 2022, 510, 204519. https://doi.org/10.1016/j.wear.2022.20451910.1016/j.wear.2022.204519 ↗
36. Z. Zhang, X. Wang, Q. Zhang, Y. Liang, L. Ren and X. Li, Fabrication of Fe-Based Composite Coatings Reinforced by TiC Particles and Its Microstructure and Wear Resistance of 40Cr Gear Steel by Low Energy Pulsed Laser Cladding, Opt. Laser Technol., 2019, 119, 105622. https://doi.org/10.1016/j.optlastec.2019.10562210.1016/j.optlastec.2019.105622 ↗
37. S.K. Nandi, R. Ajithkannan, P.J. Withers, A. Matthews, S. Roy and I. Manna, Effect of Laser Process Parameters on the Dilution, Microstructure, and Wear Behaviour of TribaloyTM T800 Cladding on AISI 316 Stainless Steel, J. Mater. Sci., 2024, 59(20), p 9042–9058. https://doi.org/10.1007/s10853-024-09593-610.1007/s10853-024-09593-6 ↗
38. Abrasion Tests for Hardmetals, GB/T 34501-2017, National Standard of the People’s Republic of China, Standardization Administration of China, 2017.
39. J. Li, Z. Liu, H. Ning, H. Ma, R. Xie, Y. Kong and Y. Fu, Ni-Based Coating on 5083 Aluminum Alloy with Cu-Ni Interlayer Fabricated by Ultra-High-Speed Laser Directed Energy Deposition, Surf. Coat. Technol., 2023, 474, 130068. https://doi.org/10.1016/j.surfcoat.2023.13006810.1016/j.surfcoat.2023.130068 ↗
40. C. Pan, L. Zongde, S. Yue, Lu. Xinjie, M. Jie, W. Xinyu and Li. Jixuan, Microstructure and Wear Resistance of Ni-Cr Alloy Laser Cladding Layer with High Cr Content, RMME-E, 2024, 53(9), p 2438–2445. https://doi.org/10.12442/j.issn.1002-185X.2023081410.12442/j.issn.1002-185X.20230814 ↗
41. Standard Test Method for Erosion of Solid Materials by Cavitating Liquid Jet, G 134, Annual Book of ASTM Standards, vol. 03.02, ASTM, 2023, p. 17.
42. K. Peng, C. Kang, G. Li, K. Matsuda and H. Soyama, Effect of Heat Treatment on the Cavitation Erosion Resistance of Stainless Steel, Mater. Corros., 2018, 69(4), p 536–544. https://doi.org/10.1002/maco.20170981810.1002/maco.201709818 ↗
43. M. Zhou, H. Liu, C. Kang and X. Wei, Resistance of Curved Surfaces to the Cavitation Erosion Produced Through High-Pressure Submerged Waterjet, Wear, 2019, 440–441, 203091. https://doi.org/10.1016/j.wear.2019.20309110.1016/j.wear.2019.203091 ↗
44. H. Soyama and O. Takakuwa, Enhancing the Aggressive Strength of a Cavitating Jet and Its Practical Application, J. Fluid Sci. Technol., 2011, 6(4), p 510–521. https://doi.org/10.1299/jfst.6.51010.1299/jfst.6.510 ↗
45. Y. Xie, H. Liu, H. Feng, F. Xie, Z. Fan, H. Wang, R. Chen, Q. Liu, D. Yi and E. Liang, Variably Polarized X-Ray Sources for LPD Calibration, Exp. Astron., 2023, 56(2), p 499–515. https://doi.org/10.1007/s10686-023-09905-910.1007/s10686-023-09905-9 ↗
46. C. Yan, Z. Yin, X. Yao, Z. Xiao, G. Wang, Y. Li, D. Wen, D. Xia and S. Wang, Design, Microstructure Characterization and Friction Properties of In Situ Synthesized, TiC-Reinforced, Fe-Based Coatings by Powder-Assisted Wire Arc Surfacing, J. Therm. Spray Tech., 2025 https://doi.org/10.1007/s11666-025-02038-910.1007/s11666-025-02038-9 ↗
47. Y. Shen, Z. Liu, Y. Kong and B. Li, A Comparative Study on the Inhibition of Microalgae Attachment Performance Between Cu-Based Alloy Laser Cladding Layer Containing Submicron Cr-Rich Precipitated Phases and Copper in Simulated Seawater, J. Alloys Compd., 2024, 992, 174642. https://doi.org/10.1016/j.jallcom.2024.17464210.1016/j.jallcom.2024.174642 ↗
48. B. Song, T. Yu, X. Jiang, W. Xi and X. Lin, Development Mechanism and Solidification Morphology of Molten Pool Generated by Laser Cladding, Int. J. Therm. Sci., 2021, 159, 106579. https://doi.org/10.1016/j.ijthermalsci.2020.10657910.1016/j.ijthermalsci.2020.106579 ↗
49. M.V. Klimova, D.G. Shaysultanov, S.V. Zherebtsov and N.D. Stepanov, Effect of Second Phase Particles on Mechanical Properties and Grain Growth in a CoCrFeMnNi High Entropy Alloy, Mater. Sci. Eng. A, 2019, 748, p 228–235. https://doi.org/10.1016/j.msea.2019.01.11210.1016/j.msea.2019.01.112 ↗
50. X. Xu, G. Mi, L. Xiong, P. Jiang, X. Shao and C. Wang, Morphologies, Microstructures and Properties of TiC Particle Reinforced Inconel 625 Coatings Obtained by Laser Cladding with Wire, J. Alloys Compd., 2018, 740, p 16–27. https://doi.org/10.1016/j.jallcom.2017.12.29810.1016/j.jallcom.2017.12.298 ↗
51. B. Wang, Y. Xu, L. Chen, Z. Zhu, F. Qiu, F. Chang, B. Dong and G.C. Barber, Insights into the Microstructure Evolution and Wear Resistance of Nano-TiC Particles Reinforced High-Cr Hot Work Die Steel, J. Mater. Res. Technol., 2024, 30, p 8371–8381. https://doi.org/10.1016/j.jmrt.2024.05.22210.1016/j.jmrt.2024.05.222 ↗
52. Y. Chenglong and K. Dejun, Microstructure, Tribocorrosion and Corrosion Performances of Laser Cladded Ni625-xTiC Coatings in 3.5% NaCl Solution, J. Therm. Spray Technol., 2024, 33(1), p 260–274. https://doi.org/10.1007/s11666-024-01717-310.1007/s11666-024-01717-3 ↗
53. N. Liu, N. Zhang, M. Shi, B. Xing, X. Zuo and S. Yin, Microstructure and Tribological Properties of Plasma Cladding FeCoNiCr-x(TiC) Composite Coatings, J. Therm. Spray Technol., 2022, 31(5), p 1649–1661. https://doi.org/10.1007/s11666-022-01383-310.1007/s11666-022-01383-3 ↗
54. P. Liu, H. Li, R. Zhang, M. Xiao, X. Wei, Y. Yin, Y. Qu, G. Cheng, G. Ren and C. Lu, Effect of Ta Addition on Microstructure and Properties of TiC Particle Reinforced Iron-Based Gradient Coating by Laser Cladding, Surf. Coat. Technol., 2025, 512, 132345. https://doi.org/10.1016/j.surfcoat.2025.13234510.1016/j.surfcoat.2025.132345 ↗
55. F. Akhtar, S.J. Askari, K.A. Shah, X. Du and S. Guo, Microstructure, Mechanical Properties, Electrical Conductivity and Wear Behavior of High Volume TiC Reinforced Cu-Matrix Composites, Mater Charact, 2009, 60(4), p 327–336. https://doi.org/10.1016/j.matchar.2008.09.01410.1016/j.matchar.2008.09.014 ↗
56. Y. Wang, W. Liu, N. Li, C. Gao, H. Xiong, Microstructures and Tensile Properties of TiC/GH5188 Composites Manufactured by Laser Melting Deposition, J. Mater. Eng., 2025, p 1–13. https://link.cnki.net/urlid/11.1800.TB.20251217.0916.002
57. J. Yun-xue, W. Hong-wei, Z. Song-yan and Z. Er-lin, Formation and Growth Mechanism of TiC Crystal in TiCp/Ti Composites, Trans. Nonferrous Met. Soc. China, 2002, 12(6), p 1158–1163. https://doi.org/10.1016/S1003-6326(02)60165-510.1016/S1003-6326(02)60165-5 ↗
58. C. Yao and W. Hua-ming, Morphological Evolution of Primary TiC Carbide in Laser Clad TiC Reinforced FeAl Intermetallic Composite Coating, Trans. Nonferrous Met. Soc. China, 2003, 13(4), p 835–838. https://doi.org/10.1016/S1003-6326(03)60074-210.1016/S1003-6326(03)60074-2 ↗
59. H. Chen, Y. Lu, Y. Sun, Y. Wei, X. Wang and D. Liu, Coarse TiC Particles Reinforced H13 Steel Matrix Composites Produced by Laser Cladding, Surf. Coat. Technol., 2020, 395, 125867. https://doi.org/10.1016/j.surfcoat.2020.12586710.1016/j.surfcoat.2020.125867 ↗
60. E.O. Hall, The Deformation and Ageing of Mild Steel: III Discussion of Results, Proc. Phys. Soc. B, 1951, 64(9), p 747. https://doi.org/10.1088/0370-1301/64/9/30310.1088/0370-1301/64/9/303 ↗
61. C. Zhao, H. Zhu and Z. Xie, In-situ TiC Particles Strengthen and Ductilize Fe1.2MnNi0.8Cr High Entropy Alloy, Intermetallics, 2022, 140, 107398. https://doi.org/10.1016/j.intermet.2021.10739810.1016/j.intermet.2021.107398 ↗
62. L. Proville and B. Bakó, Dislocation Depinning from Ordered Nanophases in a model Fcc Crystal: From Cutting Mechanism to Orowan Looping, Acta Mater., 2010, 58(17), p 5565–5571. https://doi.org/10.1016/j.actamat.2010.06.01810.1016/j.actamat.2010.06.018 ↗
63. H. Liu, J. Liu, P. Chen and H. Yang, Microstructure and High Temperature Wear Behaviour of In-situ TiC Reinforced AlCoCrFeNi-Based High-Entropy Alloy Composite Coatings Fabricated by Laser Cladding, Opt. Laser Technol., 2019, 118, p 140–150. https://doi.org/10.1016/j.optlastec.2019.05.00610.1016/j.optlastec.2019.05.006 ↗
64. R. Wang, S. Ye, P. Cheng, Z. Xie, Y. Wang, Y. Zhang, G. Li, W. Wu and X. Lu, Microstructure and Wear Resistance of in-situ TiC Reinforced Stellite 6 Coating Using PTA Cladding, J. Mater. Res. Technol., 2023, 27, p 2656–2669. https://doi.org/10.1016/j.jmrt.2023.10.05310.1016/j.jmrt.2023.10.053 ↗
65. W. Yang, X. Wang, H. Zhou, T. Zhou, and IOP Publishing, Effect of Nano TiC on Microstructure and Microhardness of Composite Additive Manufacturing 316L Stainless Steel, Mater. Res. Express, 2021, 8(12), p 126521. https://doi.org/10.1088/2053-1591/ac3b7d10.1088/2053-1591/ac3b7d ↗
66. S.-Y. Zhang, X.-B. Liu, Y. Zhu, Y.-F. Liu, Y. Meng, J. Liang and S.-H. Zhang, Stellite3-Ti3SiC2-Cu Composite Coatings on IN718 by Laser Cladding Towards Improved Wear and Oxidation Resistance, Surf. Coat. Technol., 2022, 446, 128766. https://doi.org/10.1016/j.surfcoat.2022.12876610.1016/j.surfcoat.2022.128766 ↗
67. M. Xiao, S. Nai, S. Nan, C. Feng, Z. Guan, C. Huo, F. Zhang, Z. Qiu and G. Li, Preparation, Mechanical Properties and Wear Resistance of Dual-Sized TiC Particles Reinforced High-Entropy alloy Cermet Coating, J. Mater. Res. Technol., 2024, 28, p 97–109. https://doi.org/10.1016/j.jmrt.2023.11.26410.1016/j.jmrt.2023.11.264 ↗
68. B.B. Vanani and A. Abdollahzadeh, Fabrication of Reinforced Al–Mg Composite by TiC Particles Via FSW: Microstructure and Tribology Study, J. Mater. Res. Technol., 2024, 30, p 6787–6801. https://doi.org/10.1016/j.jmrt.2024.05.06610.1016/j.jmrt.2024.05.066 ↗
69. T. Keya, S.I. Shakil, A. Odeshi, M. Haghshenas, J.-K. Choi and A. Hadadzadeh, Influence of Mechanical Properties on Cavitation-Erosion Via Cavitating Jet, Tribol. Int., 2025, 209, 110754. https://doi.org/10.1016/j.triboint.2025.11075410.1016/j.triboint.2025.110754 ↗
70. R. Zhou, Y. Cao, W. Shi, Y. Yang, S. Cheng and Z. Wang, Experimental Study on Surface Erosion of Grade-A Marine Steel with Different Curvatures by Ultra-High Pressure Water Jet, J. Mater. Res. Technol., 2024, 31, p 3025–3034. https://doi.org/10.1016/j.jmrt.2024.07.04910.1016/j.jmrt.2024.07.049 ↗
71. Ł Szymański, E. Olejnik, J.J. Sobczak, M. Szala, P. Kurtyka, T. Tokarski and A. Janas, Dry Sliding, Slurry Abrasion and Cavitation Erosion of Composite Layers Reinforced by TiC Fabricated in Situ in Cast Steel and Gray Cast Iron, J. Mater. Process. Technol., 2022, 308, 117688. https://doi.org/10.1016/j.jmatprotec.2022.11768810.1016/j.jmatprotec.2022.117688 ↗
72. X. Tang, S. Zhang, X. Cui, C. Zhang, Y. Liu and J. Zhang, Tribological and Cavitation Erosion Behaviors of Nickel-Based and Iron-Based Coatings Deposited on AISI 304 Stainless Steel by Cold Metal Transfer, J. Mater. Res. Technol., 2020, 9(3), p 6665–6681. https://doi.org/10.1016/j.jmrt.2020.04.06410.1016/j.jmrt.2020.04.064 ↗