journal article·2026-03

Optimizing a Modular Cascaded Plasma Torch to Manufacture Dense Alumina Coatings with High Spray Efficiency

Myriam Sleiman, Geoffrey Darut, Ralph Seulin, Marie Pierre Planche, Jean-Jacques Gonzalez, Pierre Freton, Francis Sambou, Armando Salito, Manfred Rösli

Journal of Thermal Spray Technology· Volume 35· Issue 2-3
Publisher page

Abstract

Abstract This study aims to investigate the influence of alumina in-flight particle characteristics on coating properties and deposition efficiency. To this end, velocity and surface temperature measurements were carried out on the in-flight particles. Resulting coatings were characterized in terms of porosity, hardness, and related to particle properties. The final goal was to obtain an optimized coating with low porosity, high hardness, manufactured with a high powder flow rate and deposition efficiency.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Metal and Thin Film Mechanics · Vacuum and Plasma Arcs

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. P. Fauchais et al., Thermal Plasmas, IEEE Trans. Plasma Sci., 1997, 25(6), p 1258–1280. https://doi.org/10.1109/27.65090110.1109/27.650901 ↗
2. J.R. Davis, Handbook of Thermal Spray Technology, ASM International, Materials Park, 2004, p 338
3. Z. Duan et al., Arc Instabilities in a Plasma Spray Torch, J. Therm. Spray Technol., 2002, 11(1), p 44–51. https://doi.org/10.1361/10599630277034896110.1361/105996302770348961 ↗
4. R. J. Molz, D. Hawley, and R. Mc Cullough, U.S. Patent Application Publication 2014/0326703 A1
5. J. Colenares-Angulo et al., Thorium-Free Versus Thoriated Plasma Gun Electrodes: Statistical Evaluation of Coating Properties, J. Therm. Spray Technol., 2016, 25, p 622–630. https://doi.org/10.1007/s11666-016-0380-110.1007/s11666-016-0380-1 ↗
6. J. Schein et al., Tomographic Investigation of Plasma Jets Produced by Multielectrode Plasma Torches, J. Therm. Spray Technol., 2008, 17, p 338–343. https://doi.org/10.1007/s11666-008-9186-010.1007/s11666-008-9186-0 ↗
7. M. Sleiman et al., Effect of Operating Parameters and Anode Configuration on Plasma Generated by a Modular Cascaded Torch, J. Therm. Spray Technol., 2024 https://doi.org/10.1007/s11666-024-01867-410.1007/s11666-024-01867-4 ↗
8. D. Chen et al., Segmented Thermal Barrier Coatings for ID and OD Components Using the SinplexPro Plasma Torch, J. Therm. Spray Technol., 2019, 28, p 1664–1673. https://doi.org/10.1007/s11666-019-00920-x10.1007/s11666-019-00920-x ↗
9. A. Dolmaire et al., Benefits of Hydrogen in a Segmented Anode Plasma Torch In Suspension Plasma Spraying, J. Therm. Spray Technol., 2021, 30, p 236–250. https://doi.org/10.1007/s11666-020-01134-210.1007/s11666-020-01134-2 ↗
10. R. Chidambaram Seshadri et al., Characteristics of Conventional and Cascaded Arc Plasma Spray-Deposited Ceramic Under Standard and High-Throughput Conditions, J. Therm. Spray Technol., 2019, 28(4), p 690–705. https://doi.org/10.1007/s11666-020-01134-210.1007/s11666-020-01134-2 ↗
11. C. Ruelle et al., Influence of Nozzle Diameter on Electric Arc Dynamics in a Cascaded-Anode Plasma Torch, J. Therm. Spray Technol., 2024, 33, p 756–770. https://doi.org/10.1007/s11666-023-01706-y10.1007/s11666-023-01706-y ↗
12. G. Darut et al., Study of the in-flight characteristics of particles for different configurations of cascade plasma torches, in Proc ITSC2021, Virtual, 2021, pp. 499–507. https://doi.org/10.31399/asm.cp.itsc2021p049910.31399/asm.cp.itsc2021p0499 ↗
13. J. Blain et al., Optimization of Sensor Optics for Industrial Thermal Spray Sensors. in Proc ITSC2007, Beijing (China), 2007, pp. 832–836. https://doi.org/10.31399/asm.cp.itsc2007p083210.31399/asm.cp.itsc2007p0832 ↗
14. Image J, https://imagej.net/ij/, visited the 30 January of 2025
15. M. Sleiman et al. Experimental characterization of the operation of modular cascade plasma torches. in Proc 11th International European Thermal Spray Conference, Jülich, Germany, June 2024.
16. A. Vardelle et al., Influence of Velocity and Surface Temperature of Alumina Particles on the Properties of Plasma Sprayed Coatings, Plasma Chem. Plasma Process., 1982, 2, p 255–291. https://doi.org/10.1007/BF0056652410.1007/BF00566524 ↗
17. A. Kobayashi, Characteristics of High Hardness Alumina Coatings Formed by Gas Tunnel Plasma Spraying, J. Therm. Spray Technol., 1997, 5(3), p 298–302. https://doi.org/10.1016/S0257-8972(96)03143-X10.1016/S0257-8972(96)03143-X ↗
18. S.V. Klinkov et al., Influence of Nozzle Velocity and Powder Feed Rate on the Coating Mass and Deposition Efficiency In Cold Spraying, Surf. Coat. Technol., 2019, 367, p 231–243. https://doi.org/10.1016/j.surfcoat.2019.04.00410.1016/j.surfcoat.2019.04.004 ↗
19. D. Thirumalaikumarasamy et al., Influences of Atmospheric Plasma Spraying Parameters on the Porosity Level of Alumina Coating on AZ31B Magnesium Alloy Using Response Surface Methodology, Prog. Nat. Sci. Mater. Int., 2012, 22(5), p 468–479. https://doi.org/10.1016/j.pnsc.2012.09.00410.1016/j.pnsc.2012.09.004 ↗
20. X.-Y. Jiang et al., Effect of High-Enthalpy Atmospheric Plasma Spraying Parameters on the Mechanical and Wear Resistant Properties of Alumina Ceramic Coatings, Surf. Coat. Technol., 2021, 48, p 127193. https://doi.org/10.1016/j.surfcoat.2021.1271910.1016/j.surfcoat.2021.12719 ↗