journal article·2026-03-22Open access

Numerical Modeling of Binary-Gas Plasma Jets in Multi-Arc Plasma Spraying and Validation of Temperature Profiles

K. Bobzin, H. Heinemann, M. Erck, K. Jasutyn, G. Nassar, F. Alberding

Abstract

Abstract While plasma jets in single-arc systems have been extensively researched, cascaded multi-arc configurations for binary-gas mixtures remain comparatively underexplored. In atmospheric plasma spraying (APS), the use of nitrogen or hydrogen as secondary gases is a prevalent practice to tailor jet properties. This study advances the field by analyzing the flow characteristics of binary-gas plasma jets in cascaded multi-arc systems, providing deeper insights into their influence on particle behavior. A numerical model was developed using temperature-dependent thermodynamic and transport properties, integrating upstream flow conditions from prior plasma generator simulations. To verify its predictive capability, the numerical results were compared with experimental data obtained via optical emission spectroscopic computed tomography (OES-CT). The analysis confirms the numerical model’s accuracy for thermal spraying applications. Notably, the significant temperature increase induced by hydrogen addition is clearly captured in both the OES-CT measurements and the simulation results. This research successfully bridges the process chain from plasma generation to final coating for binary-gas plasma environments.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Plasma Applications and Diagnostics · Erosion and Abrasive Machining

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. B. Pateyron, M.-F. Elchinger, G. Delluc, and P. Fauchais, Thermodynamic and Transport Properties of Ar-H2 and Ar-He Plasma Gases Used for Spraying at Atmospheric Pressure. I: Properties of the Mixtures, Plasma Chem. Plasma Process., 1992, 12(4), p 421–448.10.1007/BF01447253 ↗
2. M.P. Planche, J.F. Coudert, and P. Fauchais, Velocity Measurements for Arc Jets Produced by a Dc Plasma Spray Torch, Plasma Chem. Plasma Process., 1998, 18(2), p 263–283.10.1023/A:1021606701022 ↗
3. M. Vardelle, A. Vardelle, and P. Fauchais, Spray Parameters and Particle Behavior Relationships During Plasma Spraying, J Therm Spray Tech, 1993, 2(1), p 79–91.10.1007/BF02647426 ↗
4. S. Janisson, A. Vardelle, J.F. Coudert, E. Meillot, B. Pateyron, and P. Fauchais, Plasma Spraying Using Ar-He-H2 Gas Mixtures, J Therm Spray Tech, 1999, 8(4), p 545–552.10.1361/105996399770350232 ↗
5. K. Bobzin, N. Bagcivan, and I. Petkovic, Numerical and Experimental Determination of Plasma Temperature During Air Plasma Spraying with a Multiple Cathodes Torch, J. Mater. Process. Technol., 2011, 211(10), p 1620–1628.10.1016/j.jmatprotec.2011.05.001 ↗
6. K. Bobzin and M. Öte, Modeling Plasma-Particle Interaction in Multi-arc Plasma Spraying, J Therm Spray Tech, 2017, 26(3), p 279–291.10.1007/s11666-016-0514-5 ↗
7. K. Bobzin, H. Heinemann, M. Erck, S. Warkentin, O. Mokrov, R. Sharma, U. Reisgen, and K. Jasutyn, Modeling of Arcs with Binary Gas Mixtures in a Multi-arc Plasma Generator, Materialwissenschaft Werkst, 2025, 56(1), p 77–87.10.1002/mawe.202300134 ↗
8. K. Bobzin, M. Öte, J. Schein, S. Zimmermann, K. Möhwald, and C. Lummer, Modelling the Plasma Jet in Multi-arc Plasma Spraying, J Therm Spray Tech, 2016, 25(6), p 1111–1126.10.1007/s11666-016-0438-0 ↗
9. A.B. Murphy and C.J. Arundell, Transport Coefficients of Argon, Nitrogen, Oxygen, Argon-Nitrogen, and Argon-Oxygen Plasmas, Plasma Chem. Plasma Process., 1994, 14(4), p 451–490.10.1007/BF01570207 ↗
10. A.B. Murphy and E. Tam, Thermodynamic Properties and Transport Coefficients of Arc Lamp Plasmas: Argon, Krypton and Xenon, J. Phys. D Appl. Phys., 2014, 47(29), 295202.10.1088/0022-3727/47/29/295202 ↗
11. A.B. Murphy, Transport Coefficients of Plasmas in Mixtures of Nitrogen and hydrogen, Chem. Phys., 2012, 398, p 64–72.10.1016/j.chemphys.2011.06.017 ↗
12. J.P. Trelles, C. Chazelas, A. Vardelle, and J.V.R. Heberlein, Arc Plasma Torch Modeling, J Therm Spray Tech, 2009, 18(5–6), p 728–752.10.1007/s11666-009-9342-1 ↗
13. S. Rodriguez, Rans turbulence modeling, Applied Computational Fluid Dynamics and Turbulence Modeling: Practical Tools, Tips and Techniques. S. Rodriguez Ed., Springer Nature, 2019, p 121–19610.1007/978-3-030-28691-0_4 ↗
14. K. Bobzin and M. Öte, Modeling Multi-arc Spraying Systems, J. Therm. Spray Technol., 2016, 25(5), p 920–932.10.1007/s11666-016-0407-7 ↗
15. M.I. Boulos, P.L. Fauchais, and J.V.R. Heberlein, Plasma–particle momentum and heat transfer, Thermal Spray Fundamentals: from Powder to Part. M.I. Boulos, P.L. Fauchais, J.V. Heberlein Ed., Springer International Publishing, 2021, p 85–12110.1007/978-3-030-70672-2 ↗
16. D.A. Donzis and A.F. Maqui, Statistically Steady States of Forced Isotropic Turbulence in Thermal Equilibrium and Non-equilibrium, J. Fluid Mech., 2016, 797, p 181–200.10.1017/jfm.2016.288 ↗
17. S. Zimmermann, S. Schmettlach, S. Kirner, G. Forster, J. Marqués, J. Schein, and T. Schläfer, Diagnostics for Aps and Hvof Spraying Processes, Therm. Spray Bull., 2014, 7(2), p 154–161.