Numerical Analysis of Fine Particle Dynamics in Supersonic Hybrid Aerosol Deposition
Source abstract
Abstract
In hybrid aerosol deposition (HAD), fine ceramic particles are sprayed by a thermal nonequilibrium plasma jet to fabricate a film under reduced pressure. The mechanism of the particle deposition is expected to be room-temperature impact consolidation (RTIC) with plasma assistance. Our previous work demonstrated that using a supersonic nozzle in HAD (called supersonic HAD) is effective in increasing particle velocity and film hardness. Furthermore, the film deposited via HAD with a stationary plasma torch and substrate had an M-shaped cross section. However, the factors that caused this film’s shape have been unclarified. In this study, therefore, a rotationally symmetric, two-dimensional (r–z) numerical analysis was performed to clarify the particle behavior in supersonic HAD. The numerical results showed that small particles, which would be deposited in HAD, impact the substrate over a wide area, whereas large particles, which can abrade the surface of the film and substrate, impact the central region of the substrate. This difference in the particle-impact region depending on particle size leads to a deposited film with an M-shaped cross section. This work was supported by JST SPRING, Grant Number JPMJSP2124.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Plasma Applications and Diagnostics · Dust and Plasma Wave Phenomena
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. K. Shinoda, H. Noda, K. Ohtomi, T. Yamada, and J. Akedo, Promotion of Knowledge and Technology Transfer Towards Innovative Manufacturing Process: Case Study of New Hybrid Coating Process, Int. J. Autom. Technol., 2019, 13(3), p 419–431.10.20965/ijat.2019.p0419 ↗
2. M. Mori, T. Ustunomiya, N. Akita, S. Miyake, and J. Akedo, Microstructure of Pzt Films Deposited by Inductively Coupled Plasma Assisted Aerosol Deposition Method, Trans. Mater. Res. Soc. Jpn, 2008, 33(4), p 1239–1241.10.14723/tmrsj.33.1239 ↗
3. S.O. Jang, C. Cho, J.H. Kim, I.J. Kang, H. Chang, H. Park, K. Lee, D.G. Kim, and H.W. Seok, Microwave Plasma Assisted Aerosol Deposition (μ-Pad) for Ceramic Coating Applications, Ceramics (Basel), 2022, 5(4), p 1174–1184.10.3390/ceramics5040083 ↗
4. M. Shahien, M. Suzuki, K. Shinoda, and J. Akedo, Ceramic Coatings Deposited from Fine Particles by Different Spraying Processes, J. Therm. Spray Technol., 2020, 29(8), p 2033–2047.10.1007/s11666-020-01095-6 ↗
5. K. Sanami, M. Shahien, A. Yumoto, J. Akedo, and K. Shinoda, Evaluating the Mechanical Properties of Dense Hybrid Aerosol Deposition Alumina Coatings using the Nanoindentation Method, J. Therm. Spray Technol., 2023, 32(2), p 729–736.10.1007/s11666-022-01518-6 ↗
6. J. Akedo, Room Temperature Impact Consolidation and Application to Ceramic Coatings: Aerosol Deposition Method, J. Ceram. Soc. Jpn., 2020, 128(3), p 101–116.10.2109/jcersj2.19196 ↗
7. D. Hanft, J. Exner, M. Schubert, T. Stöcker, P. Fuierer, and R. Moos, An Overview of the Aerosol Deposition Method: Process Fundamentals and New Trends in Materials Applications, J. Ceram. Sci. Technol., 2015, 6(3), p 147–182.
8. J. Akedo, Room Temperature Impact Consolidation (Rtic) of Fine Ceramic Powder by Aerosol Deposition Method and Applications to Microdevices, J. Therm. Spray Technol., 2008, 17(2), p 181–198.10.1007/s11666-008-9163-7 ↗
9. Y. Akedo, E. Kubota, M. Shahien, M. Suzuki, J. Akedo, T. Fujino, and K. Shinoda, Effect of Convergent-Divergent Nozzle on Fine Particle Velocity in Low-Pressure Induction Plasma Jet in Plasma-Assisted Aerosol Deposition, Plasma Chem. Plasma Process., 2024, 44(1), p 583–600.10.1007/s11090-023-10361-8 ↗
10. M.K. Kumar, Z. Yang, M. Jadidi, T.W. Coyle, and A. Dolatabadi, Numerical Simulation and Experimental Analysis of Aerosol Deposition: Investigating Nozzle Effects on Particle Dynamics and Deposition, J. Aerosol Sci., 2025, 183, 106488.10.1016/j.jaerosci.2024.106488 ↗
11. S.G. Bierschenk and D. Kovar, A Nozzle Design for Mitigating Particle Slowing in the Bow Shock Region During Micro-cold Spray of 8 ysz Films, J. Aerosol Sci., 2024, 179, 106360.10.1016/j.jaerosci.2024.106360 ↗
12. R.C. Dykhuizen and M.F. Smith, Gas Dynamic Principles of Cold Spray, J. Therm. Spray Technol., 1998, 7(2), p 205–212.10.1361/105996398770350945 ↗
13. W.-Y. Li, H. Liao, G. Douchy, and C. Coddet, Optimal Design of a Cold Spray Nozzle by Numerical Analysis of Particle Velocity and Experimental Validation with 316l Stainless Steel Powder, Mater. Des., 2007, 28(7), p 2129–2137.10.1016/j.matdes.2006.05.016 ↗
14. Y. Akedo, K. Shinoda, and T. Fujino, Design of Supersonic Nozzle Geometry for Hybrid Aerosol Deposition, 13th Asian Thermal Spray Conference, December 2024, Japan), Japan Thermal Spray Society, Sendai, 2024.
15. C.-J. Li and W.-Y. Li, Deposition Characteristics of Titanium Coating in Cold Spraying, Surf. Coat. Technol., 2003, 167(2), p 278–283.10.1016/S0257-8972(02)00919-2 ↗
16. Y. Akedo, T. Fujino, M. Suzuki, M. Shahien, and K. Shinoda, Evaluation of Mechanical Properties and Thickness Range of Yttria-Stabilized Zirconia Coatings Deposited via Plasma-Assisted Aerosol Deposition Process, Surf. Coat. Technol., 2025, 508, 132167.10.1016/j.surfcoat.2025.132167 ↗
17. T. Fujino and M. Yamauchi, Numerical Study of Plasma-Fluid Characteristics and Thrust Performance of a Low-Power Argon Inductively Coupled Plasma Electrothermal Thruster, J. Appl. Phys., 2020, 128(17), 173302.10.1063/5.0022018 ↗
18. Y. Wada, and M.-S. Liou, A Flux Splitting Scheme with High-Resolution and Robustness for Discontinuities, 32nd Aerospace Sciences Meeting and Exhibit, 1994, American Institute of Aeronautics and Astronautics, 1994, p 8310.2514/6.1994-83 ↗
19. B. van Leer, Towards the Ultimate Conservative Difference Scheme. V. A second-order sequel to Godunov’s Method, J. Comput. Phys., 1979, 32(1), p 101–136.10.1016/0021-9991(79)90145-1 ↗
20. S. Gottlieb and C.-W. Shu, Total Variation Diminishing Runge-Kutta Scheme, Math. Comput., 1998, 67(221), p 73–85.10.1090/S0025-5718-98-00913-2 ↗
21. H. Katsurayama and T. Abe, Thermochemical Nonequilibrium Modeling of a Low-Power Argon Arcjet Wind Tunnel, J. Appl. Phys., 2013, 113(5), 053304.10.1063/1.4776765 ↗
22. O. Schenk, and K. Gärtner, Pardiso, Encyclopedia of Parallel Computing, D. Padua, Ed., Springer US, 2011, p 1458-146410.1007/978-0-387-09766-4_90 ↗
23. T. Suzuki, H. Saito, and T. Fujino, Effects of plasma-suspension interaction on axial injection Dc suspension plasma spray, IEEE Trans. Plasma Sci., 2019, 47(1), p 688–700.10.1109/TPS.2018.2871837 ↗
24. E. Loth, J.T. Daspit, M. Jeong, T. Nagata, and T. Nonomura, Supersonic and Hypersonic Drag Coefficients for a Sphere, AIAA J., 2021, 59(8), p 3261–3274.10.2514/1.J060153 ↗
25. M. Lebedev, J. Akedo, K. Mori, and T. Eiju, Simple Self-selective Method of Velocity Measurement for Particles in Impact-based Deposition, J. Vac. Sci. Technol. A, 2000, 18(2), p 563–566.10.1116/1.582226 ↗
26. H. Katanoda and K. Matsuo, Gasdynamic Simulation of Aerosol Deposition Method, Mater. Trans., 2006, 47(7), p 1620–1625.10.2320/matertrans.47.1620 ↗