journal article·2026-06-17Open access

Cold-Sprayed Bell Metal: Improving Adhesion by Substrate Laser Surface Texturing

Jan Cizek, Reeti Singh, Jan Kondas, Sebastian Kraft, Dariusz Bartocha, Maria Baryshnikova, Ondrej Kovarik

Abstract

Abstract Historical bells are worn and damaged by the ravages of time. The repair and restoration of these heritage masterpieces could be attempted using cold technology, provided a sufficient adhesion is reached. In this paper, the improvement of Cu20Sn bell metal repair adhesion by various substrate surface treatments was studied: grinding, polishing, cold spray grit-blasting, and laser texturing using five different patterns. The adhesion was tested by a new, simple glue-less method tailored for testing thick cold spray deposits. It was shown that while the cold spray grit-blasting provides a good adhesion of around 70 MPa, even better results of approximately 120 MPa could be obtained by the laser patterning. The detailed three-dimensional fractographic analysis allowed us to describe the failure mechanism of all specimens. For the best-performing laser texturing, this was a combination of interfacial debonding at the original substrate surface and the deposit cohesive fracture inside the pattern recessed areas.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Laser Material Processing Techniques · Corrosion Behavior and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. S. Yin, P. Cavaliere, B. Aldwell, R. Jenkins, H. Liao, W. Li, and R. Lupoi, Cold Spray Additive Manufacturing and Repair: Fundamentals and Applications, Addit. Manuf., 2018, 21, p 628-650.
2. V. Champagne and D. Helfritch, Critical Assessment 11: Structural Repairs by Cold Spray, Mater. Sci. Technol., 2014, 31(6), p 627-634.10.1179/1743284714Y.0000000723 ↗
3. S. Bagherifard and M. Guagliano, Fatigue Performance of Cold Spray Deposits: Coating, Repair and Additive Manufacturing Cases, Int. J. Fatigue, 2020, 139, 105744.10.1016/j.ijfatigue.2020.105744 ↗
4. The True Image Solution Ltd. General Gordon on camel. Available from: https://thetrueimagesolution.com/ColdSpray/Examples/GeneralGordonOnCamel.
5. E.G. McClain, The Bronze Chime Bells of the Marquis of Zeng: Babylonian Biophysics in Ancient China, J Social Biol Struct, 1985, 8, p 147-173.10.1016/0140-1750(85)90007-7 ↗
6. S. Ivorra, B. Torres, and A.C. Carcel, Analysis of the Failure and Remedial Measures Taken After the Collapse of a Historical Bell, Eng. Fail. Anal., 2022, 133, 105950.10.1016/j.engfailanal.2021.105950 ↗
7. X. Boutillon and B. David, Assessing Tuning and Damping of Historical Carillon Bells and their Changes Through Restoration, Appl. Acoust., 2002, 63, p 901-910.10.1016/S0003-682X(01)00067-6 ↗
8. V. Debut, M. Carvalho, E. Figueiredo, J. Antunes, and R. Silva, The Sound of Bronze: Virtual Resurrection of a Broken Medieval Bell, J Cultural Heritage, 2016, 19, p 544-554.10.1016/j.culher.2015.09.007 ↗
9. D. Neff and M. Kneblik, The King Among the Bells is Heard Only Exceptionally and is Surrounded by Many Legends (Translated From Czech). Available from: https://www.seznamzpravy.cz/clanek/obrazem-obrazem-kral-mezi-zvony-zni-jen-vyjimecne-a-oprada-ho-rada-legend-230455.
10. M. Gao, Y. Cao, X.Y. Zeng, and J.X. Hu, Microstructure Characteristics and Acoustic Properties of Laser Repaired Chinese Bronze Bells 2300 Years Ago, J. Alloy. Compd., 2011, 509(3), p 953-956.10.1016/j.jallcom.2010.09.142 ↗
11. O. Kovarik, J. Daniel, J. Cizek, J. Kondas, J. Cech, J. Siegl, and R. Singh, Fatigue pro,perties of Cold Sprayed Bell Metal. in Proc. International Thermal Spray Conference, pages 622-630. ASM International, 202210.31399/asm.cp.itsc2022p0622 ↗
12. A. Rupp and M. Plitzner, Fatigue Crack Detection on Unique Church Bells by Modal Analysis, Rivista Italiana della Saldatura, 2017, 69, p 205-215.
13. R. Kromer, S. Costil, C. Verdy, S. Gojon, and H. Liao, Laser Surface Texturing to Enhance Adhesion Bond Strength of Spray Coatings - Cold Spraying, Wire-Arc Spraying, and Atmospheric Plasma Spraying, Surf. Coat. Technol., 2018, 352, p 642-653.10.1016/j.surfcoat.2017.05.007 ↗
14. G. Prashar and H. Vasudev, A Comprehensive Review on the Analysis of Adhesion Strength of Cold Spray Deposits, Results Surf Interfaces, 2024, 16, 100263.10.1016/j.rsurfi.2024.100263 ↗
15. D. Boruah, B. Robinson, T. London, H. Wu, H. de Villiers-Lovelock, P. McNutt, M. Dore, and X. Zhang, Experimental Evaluation of Interfacial Adhesion Strength of Cold Sprayed ti-6al-4v Thick Coatings Using an Adhesive-Free Test Method, Surf. Coat. Technol., 2020, 381, 125130.10.1016/j.surfcoat.2019.125130 ↗
16. K.N. Strafford, R. Newell, K. Audy, and J. Audy, Analysis of Bell Material from the Middle Ages to the Recent Time, Endeavour, 1996, 20, p 22-27.10.1016/0160-9327(96)10003-X ↗
17. ASTM International. ASTM B-311 Standard Test Method for Density of Powder Metallurgy (PM) Materials Containing Less Than Two Percent Porosity, 2017.
18. H. Herbert, Ueber den Zusammenhang der Biegungselastizitat des Gusseisens mit seiner zug-und Druckelastizitat, Forschungsarbeiten auf dem Gebiete des Ingenieurwesens. Springer Berlin Heidelberg, 1910, p 39-8110.1007/978-3-662-02218-4_2 ↗
19. O. Kovarik, J. Siegl, J. Cizek, T. Chraska, and J. Kondas, Fracture Toughness of Cold Sprayed Pure Metals, J. Therm. Spray Technol., 2020, 29(1–2), p 147-157.10.1007/s11666-019-00956-z ↗
20. O. Kovarik, J. Cizek, S. Yin, R. Lupoi, M. Janovska, J. Cech, J. Capek, J. Siegl, and T. Chraska, Mechanical and Fatigue Properties of Diamond-Reinforced Cu and Al Metal Matrix Composites Prepared by Cold Spray, J. Therm. Spray Technol., 2022, 31(1–2), p 217-233.10.1007/s11666-022-01321-3 ↗
21. M. Koller, J. Cizek, M. Janovska, M. Sevcik, J. Kondas, R. Singh, and H. Seiner, Scan-ning Acoustic Microscopy Characterization of Cold-Sprayed Coatings Deposited on Grooved Substrates, J Therm Spray Techn, 2024, 33(6), p 1941-1954.10.1007/s11666-024-01806-3 ↗
22. International Organization for Standardization. ISO standard 25178: Geometrical Product Specifications: Surface Texture: Areal, 2021.
23. L. de Chiffre, P. Lonardo, H. Trumpold, D.A. Lucca, G. Goch, C.A. Brown, J. Raja, and H.N. Hansen, Quantitative Characterisation of Surface Texture, CIRP Ann., 2000, 49, p 635-652.10.1016/S0007-8506(07)63458-1 ↗
24. O. Kovarik, J. Cizek, and J. Kondas. Anisotropy of Ti6Al4V Deposited by Cold Spray. in Proc. International Thermal Spray Conference, pages 756-762. ASM International, 2022.10.31399/asm.cp.itsc2022p0756 ↗