journal article·2026-07-15Open access

Validation of a Digital Twin for Cold Spray Supersonic Deposition: A Literature-Based Case Study for Melt-less Additive Manufacture of IN718

Muhammad Faizan-Ur-Rab, Saden H. Zahiri

Abstract

Abstract Cold spray is a coating process as well as rapidly emerging and scalable solid-state robotic additive manufacturing technology. Its high deposition rates (+10 kg/hr) allow for manufacturing of near net shape large metal and composite structures. For example, it is possible to additive manufacture near net shape IN718 parts directly from powder in addition to coating and repair of critical components for high-temperature applications and aviation industries. The challenge is that successful cold spray deposition of IN718 depends on careful optimization of multiple processing parameters. This study examines a developed digital twin for cold spraying to overcome the time-consuming optimization process for IN718 deposition with consideration of independently published data. This approach was taken to achieve realistic validation for Cold Spray Digital Twin (CSDT) that could eventually lead to an autonomous cold spray deposition capability. The CSDT was constructed according to a calibrated and validated three-dimensional (3D) multicomponent CFD model for visualization of cold spray supersonic flow combined with all input parameters of the industry-scale cold spray systems. The predicted in-flight particle temperature and velocity that are difficult to measure experimentally are reported. The results from CSDT simulations were in agreement with the three experimental studies with consideration of 10-15% error achieved through the 3D model calibration process. The CSDT capabilities were successfully applied to visualize and discuss the IN718 deposition in relation to cold spray nozzle, shockwave formation, nozzle, and substrate heat transfer including the effect of powder feed rate. Overall, CSDT outcomes proved to be a cost-effective tool providing detailed information that otherwise would only be possible through performing challenging experimentations. Analysis of the CSDT outputs presented the opportunity for advancing our understanding of cold spray bonding and improving process efficiency using industry-scale cold spray equipment with potential improvements in designing future cold spray systems.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Fluid Dynamics and Heat Transfer · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (65)

Show source-provided references
1. O.C. Ozdemir, P. Schwartz, S. Muftu, F.C. Thompson, G.A. Crawford, A.T. Nardi, V.K. Champagne, and C.A. Widener, High Rate Deposition in Cold Spray, J. Thermal Spray Technol., 2021, 30(1-2), p 344-357. https://doi.org/10.1007/s11666-020-01135-110.1007/s11666-020-01135-1 ↗
2. W. Li, K. Yang, S. Yin, X. Yang, Y. Xu, and R. Lupoi, Solid-State Additive Manufacturing and Repairing by Cold Spraying: A Review, J. Mater. Sci. Technol., 2018, 34(3), p 440-457. https://doi.org/10.1016/j.jmst.2017.09.01510.1016/j.jmst.2017.09.015 ↗
3. R.F. Vaz, A. Garfias, V. Albaladejo, J. Sanchez, and I.G. Cano, “A Review of Advances in Cold Spray Additive Manufacturing,” Coat. MDPI, 2023 https://doi.org/10.3390/coatings1302026710.3390/coatings13020267 ↗
4. S. Yin, P. Cavaliere, B. Aldwell, R. Jenkins, H. Liao, W. Li, and R. Lupoi, Cold Spray Additive Manufacturing and Repair: Fundamentals and Applications, Addit. Manuf., 2018 https://doi.org/10.1016/j.addma.2018.04.01710.1016/j.addma.2018.04.017 ↗
5. A. Papyrin, V. Kosarev, S. Klinkov, A. Alkimov, and V. Fomin, in Cold Spray Technology, ed. by A. Papyrin (Elsevier Ltd., 2007).
6. V.F. Kosarev, S.V. Klinkov, A.P. Alkhimov, and A.N. Papyrin, On Some Aspects of Gas Dynamics of the Cold Spray Process, J. Thermal Spray Technol., 2003, 12(2), p 265-281.10.1361/105996303770348384 ↗
7. M. Grujicic, C.L. Zhao, W.S. DeRosset, and D. Helfritch, Adiabatic Shear Instability Based Mechanism for Particles/Substrate Bonding in the Cold-Gas Dynamic-Spray Process, Mater. Des., 2004, 25(8), p 681-688.10.1016/j.matdes.2004.03.008 ↗
8. S. Yin, X.F. Wang, W.Y. Li, and B.P. Xu, Numerical Study on the Effect of Substrate Angle on Particle Impact Velocity and Normal Velocity Component in Cold Gas Dynamic Spraying Based on CFD, J. Therm. Spray Technol., 2010, 19(6), p 1155-1162. https://doi.org/10.1007/s11666-010-9510-310.1007/s11666-010-9510-3 ↗
9. O.C. Ozdemir and C.A. Widener, Influence of Powder Injection Parameters in High-Pressure Cold Spray, J.Thermal Spray Techno., 2017, 26(7), p 1411-1422. https://doi.org/10.1007/s11666-017-0606-x10.1007/s11666-017-0606-x ↗
10. K.H. Leitz, M. O’Sullivan, A. Plankensteiner, T. Lichtenegger, S. Pirker, H. Kestler, and L.S. Sigl, CFDEM Modelling of Particle Heating and Acceleration in Cold Spraying, Int. J. Refract. Metals Hard Mater., 2018, 73, p 192-198. https://doi.org/10.1016/j.ijrmhm.2018.02.00310.1016/j.ijrmhm.2018.02.003 ↗
11. V. Varadaraajan and P. Mohanty, Design and Optimization of Rectangular Cold Spray Nozzle: Radial Injection Angle, Expansion Ratio and Traverse Speed, Surf. Coat. Technol., 2017, 316, p 246-254. https://doi.org/10.1016/j.surfcoat.2017.03.00510.1016/j.surfcoat.2017.03.005 ↗
12. L.-V. Bouthier and E. Hachem, Analysis and Comparisons of Various Models in Cold Spray Simulations: Towards High Fidelity Simulations, (2020). http://arxiv.org/abs/2008.07835
13. L. Cui, A.G. Gerber, and G.C. Saha, Cold Gas Dynamic Spray Technology: The Simulation of Aerodynamics of Flow, Key Eng. Mater., 2019, 813, p 7-12. https://doi.org/10.4028/www.scientific.net/KEM.813.710.4028/www.scientific.net/KEM.813.7 ↗
14. J. Pattison, S. Celotto, A. Khan, and W. O’neill, Standoff Distance and Bow Shock Phenomena in the Cold Spray Process, Surf. Coat. Technol., 2008, 202, p 1443-1454.10.1016/j.surfcoat.2007.06.065 ↗
15. F. Tao, Q. Qi, L. Wang, and A.Y.C. Nee, Digital Twins and Cyber-Physical Systems toward Smart Manufacturing and Industry 4.0: Correlation and Comparison, Engineering, 2019, 5(4), p 653-661. https://doi.org/10.1016/j.eng.2019.01.01410.1016/j.eng.2019.01.014 ↗
16. E. Irissou, D. Poirier, P. Vo, C.V. Cojocaru, M. Aghasibeig, and S. Yue, How to Unleash the Remarkable Potential of Cold Spray: A Perspective, J. Thermal Spray Technol., 2022, 31(4), p 908-919. https://doi.org/10.1007/s11666-022-01363-710.1007/s11666-022-01363-7 ↗
17. K. Malamousi, K. Delibasis, B. Allcock, and S. Kamnis, Digital Transformation of Thermal and Cold Spray Processes with Emphasis on Machine Learning, Surf. Coat. Technol., 2022 https://doi.org/10.1016/j.surfcoat.2022.12813810.1016/j.surfcoat.2022.128138 ↗
18. M.F. Ur Rab, S. Zahiri, S.H. Masood, M. Jahedi, and R. Nagarajah, Development of 3D Multicomponent Model for Cold Spray Process Using Nitrogen and Air, Coat. MDPI AG, 5(4), p 688-708 (2015). https://doi.org/10.3390/coatings504068810.3390/coatings5040688 ↗
19. M. Faizan-Ur-Rab, S.H. Zahiri, S.H. Masood, M. Jahedi, and R. Nagarajah, PIV Validation of 3D Multicomponent Model for Cold Spray Within Nitrogen and Helium Supersonic Flow Field, J. Thermal Spray Technol., 2017, 26(5), p 941-957. https://doi.org/10.1007/s11666-017-0567-010.1007/s11666-017-0567-0 ↗
20. M. Faizan-Ur-Rab, S.H. Zahiri, P.C. King, C. Busch, S.H. Masood, M. Jahedi, R. Nagarajah, and S. Gulizia, Utilization of Titanium Particle Impact Location to Validate a 3D Multicomponent Model for Cold Spray Additive Manufacturing, J. Thermal Spray Technol., 2017, 26, p 1-14.10.1007/s11666-017-0628-4 ↗
21. M. Faizan-Ur-Rab, S.H. Zahiri, S.H. Masood, M. Jahedi, and R. Nagarajah, 3D CFD Multicomponent Model for Cold Spray Additive Manufacturing of Titanium Particles TMS Annual Meeting, Miner. Metals Mater. Soc., 2016 https://doi.org/10.1002/9781119274681.ch2610.1002/9781119274681.ch26 ↗
22. J. Fiebig, J.P. Gagnon, G. Mauer, E. Bakan, and R. Vaßen, In-Flight Measurements of Particle Temperature and Velocity with a High-Speed IR Camera During Cold Gas Spraying of In718 and TiAlCrNb, J. Thermal Spray Technol., 2022, 31(7), p 2013-2024. https://doi.org/10.1007/s11666-022-01426-910.1007/s11666-022-01426-9 ↗
23. W. Sun, A.W.Y. Tan, D.J.Y. King, N.W. Khun, A. Bhowmik, I. Marinescu, and E. Liu, Tribological Behaviour of Cold Sprayed Inconel 718 Coatings at Room and Elevated Temperatures, Surf. Coat. Technol., 2019, 385, p 125386. https://doi.org/10.1016/j.surfcoat.2020.12538610.1016/j.surfcoat.2020.125386 ↗
24. W. Ma, Y. Xie, C. Chen, H. Fukanuma, J. Wang, Z. Ren, and R. Huang, Microstructural and Mechanical Properties of High-Performance Inconel 718 Alloy by Cold Spraying, J. Alloys Compd., 2019, 792, p 456-467. https://doi.org/10.1016/j.jallcom.2019.04.04510.1016/j.jallcom.2019.04.045 ↗
25. H.P. Wang, C.H. Zheng, P.F. Zou, S.J. Yang, L. Hu, and B. Wei, Density Determination and Simulation of Inconel 718 Alloy at Normal and Metastable Liquid States, J. Mater. Sci. Technol., 2018, 34(3), p 436-439. https://doi.org/10.1016/j.jmst.2017.10.01410.1016/j.jmst.2017.10.014 ↗
26. Z. Wang, K. Guan, M. Gao, X. Li, X. Chen, and X. Zeng, The Microstructure and Mechanical Properties of Deposited-IN718 by Selective Laser Melting, J. Alloys Compd., 2012, 513, p 518-523. https://doi.org/10.1016/j.jallcom.2011.10.10710.1016/j.jallcom.2011.10.107 ↗
27. S. Bagherifard, S. Monti, M.V. Zuccoli, M. Riccio, J. Kondás, and M. Guagliano, Cold Spray Deposition for Additive Manufacturing of Freeform Structural Components Compared to Selective Laser Melting, Mater. Sci. Eng. A, 2018, 721, p 339-350. https://doi.org/10.1016/j.msea.2018.02.09410.1016/j.msea.2018.02.094 ↗
28. D. Ompong, R. Murray, Z.S. Thorbjornsen, M. Thorbjornsen, H. Mehdizadeh-Rad, and K. Krishnan, Environmental Impact of Cold Sprayed 3D-Printed Aluminium Metal Parts, J. Clean. Prod., 2022 https://doi.org/10.1016/j.jclepro.2022.13509610.1016/j.jclepro.2022.135096 ↗
29. G. Prashar and H. Vasudev, “A Comprehensive Review on Sustainable Cold Spray Additive Manufacturing: State of the Art, Challenges and Future Challenges,” J. Cleaner Prod., 2021 https://doi.org/10.1016/j.jclepro.2021.12760610.1016/j.jclepro.2021.127606 ↗
30. S.M. Mousavi and E. Roohi, Three Dimensional Investigation of the Shock Train Structure in a Convergent-Divergent Nozzle, Acta Astronaut., 2014, 105(1), p 117-127. https://doi.org/10.1016/j.actaastro.2014.09.00210.1016/j.actaastro.2014.09.002 ↗
31. H. Jafari, S. Emami, and Y. Mahmoudi, Numerical Investigation of Dual-Stage High Velocity Oxy-Fuel (HVOF) Thermal Spray Process: A Study on Nozzle Geometrical Parameters, Appl. Therm. Eng., 2017, 111, p 745-758. https://doi.org/10.1016/j.applthermaleng.2016.09.14510.1016/j.applthermaleng.2016.09.145 ↗
32. M. Faizan-Ur-Rab, S.H.H. Zahiri, S.H.H. Masood, T.D.D. Phan, M. Jahedi, and R. Nagarajah, Application of a Holistic 3D Model to Estimate State of Cold Spray Titanium Particles, Mater. Des., 2016, 89, p 1227-1241.10.1016/j.matdes.2015.10.075 ↗
33. M.A. Khalik, S.H. Zahiri, S.H. Masood, S. Palanisamy, and S. Gulizia, In Situ Electro-Plastic Treatment for Thermomechanical Processing of CP Titanium, Int. J. Adv. Manuf. Technol., 2021, 115, p 2639-2657. https://doi.org/10.1007/s00170-021-07342-6/Published10.1007/s00170-021-07342-6/Published ↗
34. M.A. Khalik, S.H. Zahiri, S. Palanisamy, S.H. Masood, S. Gulizia, and M. Faizan-Ur-Rab, Rapid Elimination of Porosity and Brittleness in Cold Spray Additive Manufactured Grade 2 Titanium via in Situ Electro-Plastic Treatment, Int. J. Adv. Manuf. Technol., 2022, 119(1-2), p 773-788. https://doi.org/10.1007/s00170-021-08309-310.1007/s00170-021-08309-3 ↗
35. M.H. Abdul Khalik Saden Zahiri Syed H Masood Stefan Gulizia Muhammad Faizan-Ur-Rab Suresh Palanisamy, Simultaneous Densification and Improvement of Cold Spray Additively Manufactured Ti-6Al-4V Properties via Electro Plastic Treatment. Int. J. Adv. Manuf. Technol. 126, p 4297-4316 (2023). https://doi.org/10.21203/rs.3.rs-2583631/v110.21203/rs.3.rs-2583631/v1 ↗
36. H. Assadi, F. Gärtner, T. Stoltenhoff, and H. Kreye, Bonding Mechanism in Cold Gas Spraying, Acta Mater., 2003, 51(15), p 4379-4394.10.1016/S1359-6454(03)00274-X ↗
37. H. Assadi, T. Schmidt, H. Richter, J.O. Kliemann, K. Binder, F. Gartner, T. Klassen, and H. Kreye, On Parameter Selection in Cold Spraying, J. Thermal Spray Technol., 2011, 20(6), p 1161-1176.10.1007/s11666-011-9662-9 ↗
38. T. Schmidt, H. Assadi, F. Gärtner, H. Richter, T. Stoltenhoff, H. Kreye, and T. Klassen, From Particle Acceleration to Impact and Bonding in Cold Spraying, J. Thermal Spray Technol., 2009, 18(5-6), p 794-808.10.1007/s11666-009-9357-7 ↗
39. O.C. Ozdemir, C.A. Widener, D. Helfritch, and F. Delfanian, Estimating the Effect of Helium and Nitrogen Mixing on Deposition Efficiency in Cold Spray, J. Thermal Spray Technol., 2016, 25(4), p 660-671. https://doi.org/10.1007/s11666-016-0394-810.1007/s11666-016-0394-8 ↗
40. R. Huang, W. Ma, and H. Fukanuma, Development of Ultra-Strong Adhesive Strength Coatings Using Cold Spray, Surf. Coat. Technol., 2014, 258, p 832-841. https://doi.org/10.1016/j.surfcoat.2014.07.07410.1016/j.surfcoat.2014.07.074 ↗
41. G. Mauer, R. Singh, K.H. Rauwald, S. Schrüfer, S. Wilson, and R. Vaßen, Diagnostics of Cold-Sprayed Particle Velocities Approaching Critical Deposition Conditions, J. Thermal Spray Technol., 2017, 26(7), p 1423-1433. https://doi.org/10.1007/s11666-017-0596-810.1007/s11666-017-0596-8 ↗
42. A. Moridi, S.M. Hassani-Gangaraj, and M. Guagliano, A Hybrid Approach to Determine Critical and Erosion Velocities in the Cold Spray Process, Appl. Surf. Sci., 2013, 273, p 617-624. https://doi.org/10.1016/j.apsusc.2013.02.08910.1016/j.apsusc.2013.02.089 ↗
43. X.T. Luo, Y.J. Li, C.X. Li, G.J. Yang, and C.J. Li, Effect of Spray Conditions on Deposition Behaviour and Microstructure of Cold Sprayed Ni Coatings Sprayed with a Porous Electrolytic Ni Powder, Surf. Coat. Technol., 2016, 289, p 85-93. https://doi.org/10.1016/j.surfcoat.2016.01.05810.1016/j.surfcoat.2016.01.058 ↗
44. M. Yu, W.Y. Li, X.K. Suo, and H.L. Liao, Effects of Gas Temperature and Ceramic Particle Content on Microstructure and Microhardness of Cold Sprayed SiCp/Al 5056 Composite Coatings, Surf. Coat. Technol., 2013, 220, p 102-106. https://doi.org/10.1016/j.surfcoat.2012.05.05010.1016/j.surfcoat.2012.05.050 ↗
45. S. Yin, X. Suo, H. Liao, Z. Guo, and X. Wang, Significant Influence of Carrier Gas Temperature during the Cold Spray Process, Surf. Eng., 2014, 30(6), p 443-450. https://doi.org/10.1179/1743294414Y.000000027610.1179/1743294414Y.0000000276 ↗
46. V.S. Bhattiprolu, K.W. Johnson, O.C. Ozdemir, and G.A. Crawford, Influence of Feedstock Powder and Cold Spray Processing Parameters on Microstructure and Mechanical Properties of Ti-6Al-4V Cold Spray Depositions, Surf. Coat. Technol., 2018, 335, p 1-12. https://doi.org/10.1016/j.surfcoat.2017.12.01410.1016/j.surfcoat.2017.12.014 ↗
47. Y. Zhao, K. Li, M. Gargani, and W. Xiong, A Comparative Analysis of Inconel 718 Made by Additive Manufacturing and Suction Casting: Microstructure Evolution in Homogenization, Addit. Manuf., 2020 https://doi.org/10.1016/j.addma.2020.10140410.1016/j.addma.2020.101404 ↗
48. Z. Zhang, D.H.L. Seng, M. Lin, S.L. Teo, T.L. Meng, C.J.J. Lee, Z.Q. Zhang, T. Ba, J. Guo, K. Sundaravadivelu, P.K. Aw, and J. Pan, Cold Spray Deposition of Inconel 718 in Comparison with Atmospheric Plasma Spray Deposition, Appl. Surf. Sci., 2021 https://doi.org/10.1016/j.apsusc.2020.14770410.1016/j.apsusc.2020.147704 ↗
49. W.M. Tucho and V. Hansen, Characterization of SLM-Fabricated Inconel 718 After Solid Solution and Precipitation Hardening Heat Treatments, J. Mater. Sci., 2019, 54(1), p 823-839. https://doi.org/10.1007/s10853-018-2851-x10.1007/s10853-018-2851-x ↗
50. S.H. Zahiri, S. Gulizia, and L. Prentice, An Overview of Cold Spray Additive Technology in Australia for Melt-Less Manufacture of Titanium, MATEC Web Conf., EDP Sci., 2020, 321, p 03011. https://doi.org/10.1051/matecconf/20203210301110.1051/matecconf/202032103011 ↗
51. S. Yin, M. Meyer, W. Li, H. Liao, and R. Lupoi, Gas Flow, Particle Acceleration, and Heat Transfer in Cold Spray: A Review, J. Therm. Spray Technol., 2016 https://doi.org/10.1007/s11666-016-0406-810.1007/s11666-016-0406-8 ↗
52. R.G. Neo, K. Wu, S.C. Tan, and W. Zhou, Effect of Spray Distance and Powder Feed Rate on Particle Velocity in Cold Spray Processes, Metals, 2022 https://doi.org/10.3390/met1201007510.3390/met12010075 ↗
53. “Impact_Innovations_Cold_Spray_Equipment-V2-2018,” (Impact Innovation, 2018), https://www.fst.nl/images/downloads/system/2020system/Impact_Innovations_Cold_Spray_Equipment-V2-2018.pdf. Accessed 13 July 2023
54. “Plasma Giken PCS-1000 Cold Spray Gun,” n.d. http://plasma.co.jp/en/service/cold/pcs_gun/. Accessed 13 July 2023
55. C. Munro, P. Vo and B. Guerreiro, Preliminary Development of Cold Spray Procedures for Nickel Aluminium Bronze Casting Repair, Mater. Sci. Forum, 2021 https://doi.org/10.4028/www.scientific.net/MSF.1016.97110.4028/www.scientific.net/MSF.1016.971 ↗
56. A. Vargas-Uscategui, P.C. King, M.J. Styles, M. Saleh, V. Luzin, and K. Thorogood, Residual Stresses in Cold Spray Additively Manufactured Hollow Titanium Cylinders, J. Thermal Spray Technol., 2020, 29(6), p 1508-1524. https://doi.org/10.1007/s11666-020-01028-310.1007/s11666-020-01028-3 ↗
57. R.G. Neo, K. Wu, S.C. Tan, and W. Zhou, Effect of Spray Distance and Powder Feed Rate on Particle Velocity in Cold Spray Processes, Metals (Basel) MDPI, 2022, 12(1), p 75. https://doi.org/10.3390/met1201007510.3390/met12010075 ↗
58. O.C. Ozdemir, C.A. Widener, M.J. Carter, and K.W. Johnson, Predicting the Effects of Powder Feeding Rates on Particle Impact Conditions and Cold Spray Deposited Coatings, J. Thermal Spray Technol., 2017, 26(7), p 1598-1615. https://doi.org/10.1007/s11666-017-0611-010.1007/s11666-017-0611-0 ↗
59. T.C. Hanson and G.S. Settles, Particle Temperature and Velocity Effects on the Porosity and Oxidation of an HVOF Corrosion-Control Coating, J. Therm. Spray Technol., 2003, 12, p 403-415.10.1361/105996303770348276 ↗
60. S.H. Zahiri, D. Fraser, S. Gulizia, and M. Jahedi, Effect of Processing Conditions on Porosity Formation in Cold Gas Dynamic Spraying of Copper, J. Therm. Spray Technol., 2006 https://doi.org/10.1361/105996306X12443710.1361/105996306X124437 ↗
61. M.R. Rokni, S.R. Nutt, C.A. Widener, V.K. Champagne, and R.H. Hrabe, Review of Relationship Between Particle Deformation Coating Microstructure, and Properties in High-Pressure Cold Spray, J. Thermal Spray Technol., 2017, 26(6), p 1308-1355. https://doi.org/10.1007/s11666-017-0575-010.1007/s11666-017-0575-0 ↗
62. T. Schmidt, F. Gaertner, and H. Kreye, “New Developments in Cold Spray Based on Higher Gas and Particle Temperatures,” Proceedings of the International Thermal Spray Conference, p 488-494 (2006). https://doi.org/10.1361/105996306X14714410.1361/105996306X147144 ↗
63. M. Yu, W.Y. Li, F.F. Wang, X.K. Suo, and H.L. Liao, Effect of Particle and Substrate Preheating on Particle Deformation Behaviour in Cold Spraying, Surf. Coat. Technol., 2013, 220, p 174-178. https://doi.org/10.1016/j.surfcoat.2012.04.08110.1016/j.surfcoat.2012.04.081 ↗
64. W.Y. Li, D.D. Zhang, C.J. Huang, S. Yin, M. Yu, F.F. Wang, and H.L. Liao, Modelling of Impact Behaviour of Cold Spray Particles: Review, Surf. Eng., 2014, 30(5), p 299-308. https://doi.org/10.1179/1743294414Y.000000026810.1179/1743294414Y.0000000268 ↗
65. W. Wong, P. Vo, E. Irissou, A.N. Ryabinin, J.G. Legoux, and S. Yue, Effect of Particle Morphology and Size Distribution on Cold-Sprayed Pure Titanium Coatings, J. Therm. Spray Technol., 2013, 22(7), p 1140-1153. https://doi.org/10.1007/s11666-013-9951-610.1007/s11666-013-9951-6 ↗