journal article·2026-07-20Open access

Numerical Model of a Hydrogen-Fueled HVOF Thermal Spray Process

Benedikt Biller, Alexander Bußmann, Olivier Messe, Marcus Giglmaier, Nikolaus A. Adams

Abstract

Abstract The present study introduces and validates a comprehensive numerical model for hydrogen-fueled high-velocity oxygen-fuel (HVOF) spraying of tungsten carbide-cobalt-chromium (WC-Co-Cr) powder. We conduct three-dimensional (3D), two-way coupled simulations of the reactive, particle-laden flow within the DJ2600 thermal spray gun and its supersonic exhaust jet. The model incorporates the real nozzle geometry, applies the eddy-dissipation concept (EDC) as a finite-rate chemistry approach for hydrogen combustion, and uses an explicit algebraic Reynolds stress model (EARSM) for turbulent scales. Consequently, our simulations enable a precise analysis of flame dynamics by revealing unprecedented levels of flow field detail in the nozzle’s convergent section. We find that the interaction of fuel, oxidizer, and cooling air streams produces diverse, three-dimensional flame shapes. Furthermore, we compare the standard particle modeling approach from literature with an enhanced approach that accounts for rarefied flow at the particle scale, viscous heating in the boundary layers around particles, and temperature-dependent particle heat capacities. Our results demonstrate that including these phenomena is critical for correctly predicting particle impact properties. Finally, we analyze particle states both in flight and upon impact on the target surface.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Combustion and flame dynamics · Particle Dynamics in Fluid Flows

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (71)

Show source-provided references
1. M. Li and P.D. Christofides, Modeling and Control of High-Velocity Oxygen-Fuel (HVOF) Thermal Spray: A Tutorial Review, J. Therm. Spray Technol., 2009, 18, p 753–768.10.1007/s11666-009-9309-2 ↗
2. I. Baumann, L. Hagen, W. Tillmann, P. Hollingsworth, D. Stangier, G. Schmidtmann, M. Tolan, M. Paulus, and C. Sternemann, Process Characteristics, Particle Behavior and Coating Properties during HVOF Spraying of Conventional, Fine and Nanostructured WC-12Co Powders, Surf. Coatings Technol., 2021, 405, p 126716.10.1016/j.surfcoat.2020.126716 ↗
3. H. Tabbara, S. Gu, and D. McCartney, Computational Modeling of Titanium Particles in Warm Spray, Comput. Fluids, 2011, 44, p 358–368.10.1016/j.compfluid.2011.01.034 ↗
4. C. Li, S. Li, P. Liu, and X. Han, Numerical Simulation and Sensitivity Evaluation of Process Parameters for AC-HVOF Spraying 3D Model, JOM, 2024, 76(11), p 6402–6418.10.1007/s11837-024-06652-w ↗
5. H. Tabbara and S. Gu, Computational Simulation of Liquid-Fueled HVOF Thermal Spraying, Surf. Coatings Technol., 2009, 204(5), p 676–684.10.1016/j.surfcoat.2009.09.005 ↗
6. S. Gu, C.N. Eastwick, K.A. Simmons, and D.G. McCartney, Computation Fluid Dynamic Modeling of Gas Flow Characteristics in a High-Velocity Oxy-Fuel Thermal Spray System, J. Therm. Spray Technol., 2001, 10, p 461–469.10.1361/105996301770349231 ↗
7. S. Gu, D.G. McCartney, C.N. Eastwick, and K. Simmons, Numerical Modeling of In-flight Characteristics of Inconel 625 Particles during High-Velocity Oxy-Fuel Thermal Spraying, J. Therm. Spray Technol., 2004, 13, p 200–213.10.1361/10599630419337 ↗
8. M. Li and P.D. Christofides, Multi-scale Modeling and Analysis of an Industrial HVOF Thermal Spray Process, Chem. Eng. Sci., 2005, 60, p 3649–3669.10.1016/j.ces.2005.02.043 ↗
9. K.E. Tello, I. González, F. De Barbieri, and C. Aguilar, Numerical Modeling of Gas and WC-Co-Cr Particles in the HVOF Process Using DJ2700 Gun and Hydrogen as a Fuel, J. Therm. Spray Technol., 2025, 34, p 1622–1641.10.1007/s11666-025-01998-2 ↗
10. M. Li, D. Shi, and P.D. Christofides, Diamond Jet Hybrid HVOF Thermal Spray: Gas-Phase and Particle Behavior Modeling and Feedback Control Design, Ind. Eng. Chem. Res., 2004, 43, p 3632–3652.10.1021/ie030559i ↗
11. M. Li and P.D. Christofides, Computational Study of Particle in-Flight Behavior in the HVOF Thermal Spray process, Chem. Eng. Sci., 2006, 61, p 6540–6552.10.1016/j.ces.2006.05.050 ↗
12. S. Kamnis and S. Gu, Numerical Modeling of Propane Combustion in a High Velocity Oxygen–Fuel Thermal Spray Gun, Chem. Eng. Process. Process. Intensif., 2006, 45(4), p 246–253.10.1016/j.cep.2005.06.011 ↗
13. S. Kamnis and S. Gu, 3-D Modeling of Kerosene-Fueled HVOF Thermal Spray Gun, Chem. Eng. Sci., 2006, 61(16), p 5427–5439.10.1016/j.ces.2006.04.005 ↗
14. S. Kamnis, S. Gu, and N. Zeoli, Mathematical Modeling of Inconel 718 Particles in HVOF Thermal Spraying, Surf. Coatings Technol., 2008, 202(12), p 2715–2724.10.1016/j.surfcoat.2007.10.006 ↗
15. S. Kamnis and S. Gu, Study of In-flight and Impact Dynamics of Nonspherical Particles from HVOF Guns, J. Therm. Spray Technol., 2009, 19(1–2), p 31–41.
16. S. Kamnis, S. Gu, and M. Vardavoulias, Numerical Study to Examine the Effect of Porosity on In-flight Particle Dynamics, J. Therm. Spray Technol., 2011, 20(3), p 630–637.10.1007/s11666-010-9606-9 ↗
17. C. Li, X. Gao, Y. Yang, X. Chen, and X. Han, Sensitivity Analysis of Process Parameters of Warm Spraying Process Based on Response Surface Method, J. Therm. Spray Technol., 2022, 31, p 585–597.10.1007/s11666-022-01319-x ↗
18. J.A. Browning, Thermal spray method and apparatus for optimizing flame jet temperature, Browning Thermal Systems Inc, U.S. pat., 1994.
19. M.N. Khan and T. Shamim, Investigation of a Dual-Stage High Velocity Oxygen Fuel Thermal Spray System, Appl. Energy, 2014, 130, p 853–862.10.1016/j.apenergy.2014.03.075 ↗
20. S. Emami, H. Jafari, and Y. Mahmoudi, Effects of Combustion Model and Chemical Kinetics in Numerical Modeling of Hydrogen-Fueled Dual-Stage HVOF System, J. Therm. Spray Technol., 2019, 28, p 333–345.10.1007/s11666-019-00826-8 ↗
21. H. Jafari, S. Emami, and Y. Mahmoudi, Numerical Investigation of Dual-Stage High Velocity Oxy-Fuel (HVOF) Thermal Spray Process: A Study on Nozzle Geometrical Parameters, Appl. Therm. Eng., 2017, 111, p 745–758.10.1016/j.applthermaleng.2016.09.145 ↗
22. H.-R. Jiang, M.-L. Li, X.-S. Wei, T.-C. Ma, Y. Dong, C.-X. Ying, Z.-Y. Liao, and J. Shen, Numerical Investigation of In-flight Behavior of Fe-Based Amorphous Alloy Particles in AC-HVAF Thermal Spray Process, J. Therm. Spray Technol., 2019, 28, p 1146–1159.10.1007/s11666-019-00889-7 ↗
23. Y. Wang, Z. Xing, Q. Luo, A. Rahman, J. Jiao, S. Qu, Y. Zheng, and J. Shen, Corrosion and Erosion–Corrosion Behavior of Activated Combustion High-Velocity Air Fuel Sprayed Fe-Based Amorphous Coatings in Chloride-Containing Solutions, Corros. Sci., 2015, 98, p 339–353.10.1016/j.corsci.2015.05.044 ↗
24. X. Gao, C. Li, D. Zhang, H. Gao, and X. Han, Numerical Analysis of the Activated Combustion High-Velocity Air-Fuel (AC-HVAF) Thermal Spray Process: A Survey on the Parameters of Operation and Nozzle Geometry, Surf. Coatings Technol., 2021, 405, p 126588.10.1016/j.surfcoat.2020.126588 ↗
25. N.-C. Wu, F. Yang, W.-H. Sun, G. Yang, Y. Liang, S.-D. Zhang, and J.-Q. Wang, In-flight Oxidation of Fe-Based Amorphous Particle during HVAF Spraying: Numerical Simulation and Experiment, J. Therm. Spray Technol., 2023, 32(7), p 2187–2201.10.1007/s11666-023-01623-0 ↗
26. C. Li, S. Li, P. Liu, P. Tang, S. Kong, and C. Wang, Research on Flame Characteristics and Coating Growth Process of Titanium Alloy in HVAF Spraying, Int. J. Appl. Ceram. Technol., 2025 https://doi.org/10.1111/ijac.1497310.1111/ijac.14973 ↗
27. X. Zhao, C. Li, H. Jiang, S. Li, and X. Han, Mechanistic Study on the Influence of Hydrogen Fuel in High-Velocity Oxygen-Fuel (HVOF) Thermal Spraying Process, JOM, 2024, 76(1), p 57–70.10.1007/s11837-023-06254-y ↗
28. D. Cheng, Q. Xu, G. Tapaga, and E.J. Lavernia, A Numerical Study of High-Velocity Oxygen Fuel Thermal Spraying Process. Part I: Gas Phase Dynamics, Metall. Mater. Trans. A, 2001, 32(7), p 1609–1620.10.1007/s11661-001-0139-1 ↗
29. A. Dolatabadi, J. Mostaghimi, and V. Pershin, Effect of a Cylindrical Shroud on Particle Conditions in High Velocity Oxy-Fuel Spray Process, Sci. Technol. Adv. Mater., 2018, 3(3), p 245–255.10.1016/S1468-6996(02)00023-2 ↗
30. J. Ren, G. Zhang, Y. Rong, and Y. Ma, A Feature-Based Model for Optimizing HVOF Process by Combining Numerical Simulation with Experimental Verification, J. Manuf. Process., 2021, 64, p 224–238.10.1016/j.jmapro.2021.01.017 ↗
31. S. Gu and S. Kamnis, Numerical Modeling of In-flight Particle Dynamics of Non-Spherical Powder, Surf. Coatings Technol., 2009, 203(22), p 3485–3490.10.1016/j.surfcoat.2009.05.024 ↗
32. J. Yu, X. Liu, Y. Yu, Z. Li, S. Xu, H. Li, P. Liu, and L. Wang, Effect of HVOF Spraying Process on Particle Behavior of Fe-Based Amorphous Alloy Coatings, J. Therm. Spray Technol., 2022, 31(8), p 2448–2462.10.1007/s11666-022-01476-z ↗
33. J. Ren, R. Ahmad, G. Zhang, Y. Rong, and Y. Ma, A Parametric Simulation Model for HVOF Coating Thickness Control, Int. J. Adv. Manuf. Technol., 2021, 116, p 293–314.10.1007/s00170-021-07429-0 ↗
34. S.B. Pope, Turbulent Flows, Cambridge University Press, 2000.10.1017/CBO9780511840531 ↗
35. B. Biller, A. Bußmann, O. Messe, M. Giglmaier, S. Adami, and N.A. Adams, Particle Deposition on the Convergent Nozzle Walls of Thermal Spray Guns, Surf. Coatings Technol., 2024, 494, p 131380.10.1016/j.surfcoat.2024.131380 ↗
36. F.R. Menter, Two-Equation Eddy-Viscosity Turbulence Models for Engineering Applications, AIAA J., 1994, 32, p 1598–1605.10.2514/3.12149 ↗
37. N. Zeoli, S. Gu, and S. Kamnis, Numerical Simulation of In-flight Particle Oxidation during Thermal Spraying, Comput. Chem. Eng., 2008, 32(7), p 1661–1668.10.1016/j.compchemeng.2007.08.008 ↗
38. B. Magnussen and B. Hjertager, On Mathematical Modeling of Turbulent Combustion with Special Emphasis on Soot Formation and Combustion, Symp. (International) on Combust, 16(1), p 719–729 (1977)10.1016/S0082-0784(77)80366-4 ↗
39. B. Magnussen, On the structure of turbulence and a generalized eddy dissipation concept for chemical reaction in turbulent flow, in 19th Aerospace Sciences Meeting, Jan. 12–15, 1981 (St. Louis), American Institute of Aeronautics and Astronautics, 198110.2514/6.1981-42 ↗
40. I.S. Ertesvåg, Analysis of Some Recently Proposed Modifications to the Eddy Dissipation Concept (EDC), Comb. Sci. Technol., 2020, 192(6), p 1108–1136.10.1080/00102202.2019.1611565 ↗
41. A. Nastic and B. Jodoin, Evaluation of Heat Transfer Transport Coefficient for Cold Spray Through Computational Fluid Dynamics and Particle In-flight Temperature Measurement using a High-Speed IR Camera, J. Therm. Spray Technol., 2018, 27(8), p 1491–1517.10.1007/s11666-018-0787-y ↗
42. S. Chadha, R. Jefferson-Loveday, and T. Hussain, Modeling Knudsen Number Effects in Suspension High Velocity Oxy Fuel Thermal Spray, Int. J. Heat Mass Transf., 2020, 152, p 119454.10.1016/j.ijheatmasstransfer.2020.119454 ↗
43. B.E. Poling, The Properties of Gases and Liquids, 5. rev. ed. McGraw-Hill, 2001.
44. A.D. Gosman and E. loannides, Aspects of Computer Simulation of Liquid-Fueled Combustors, J. Energy, 1983, 7, p 482–490.10.2514/3.62687 ↗
45. S. O. Chung, Survey of Literature on Convective Heat Transfer Coefficients and Recovery Factors for High Atmosphere Thermometry, 1973, https://ntrs.nasa.gov/citations/19740019690
46. S.A. Morsi and A.J. Alexander, An Investigation of Particle Trajectories in Two-Phase Flow Systems, J. Fluid Mech., 1972, 55, p 193.10.1017/S0022112072001806 ↗
47. W.E. Ranz and W.R.J. Marshall, Evaporation from Drops Part II, Chem. Eng. Prog., 1952, 48, p 173–180.
48. W.E. Ranz and W.R.J. Marshall, Evaporation from Drops .Part I, Chem. Eng. Prog., 1952, 48, p 141–146.
49. S. Gordon, B. J. McBride, and M. J. Zehe, NASA Glenn Coefficients for Calculating Thermodynamic Properties of Individual Species, Glenn Research Center, 2002, https://ntrs.nasa.gov/ citations/20020085330
50. C.B. Henderson, Drag Coefficients of Spheres in Continuum and Rarefied Flows, AIAA J., 1976, 14(6), p 707–708.10.2514/3.61409 ↗
51. J. Drake Robert M., Discussion: Forced Convection Heat Transfer From an Isothermal Sphere to Water (Vliet, G. C., and Leppert, G., 1961, ASME J. Heat Transfer, 83, pp. 163–170), J. Heat Transf., 83(2), p 170–172 (1961)10.1115/1.3680505 ↗
52. L.L. Kavanau, Heat Transfer from Spheres to a Rarefied Gas in Subsonic Flow, Trans. Am. Soc. Mech. Eng., 2022, 77(5), p 617–623.
53. D.J. Carlson and R.F. Hoglund, Particle Drag and Heat Transfer in Rocket Nozzles, AIAA J., 1964, 2(11), p 1980–1984.10.2514/3.2714 ↗
54. T. Poinsot and D. Veynante, Theoretical and Numerical Combustion, 2005.
55. S. Wallin and A.V. Johansson, An Explicit Algebraic Reynolds Stress Model for Incompressible and Compressible Turbulent Flows, J. Fluid Mech., 2000, 403, p 89–132.10.1017/S0022112099007004 ↗
56. Ansys Fluent Theory Guide, Canonsburg: Ansys, Inc., 2024
57. N. A. K. Doan, M. T. Lewandowski, A. A. Perpignan, and D. Roekaerts, Chapter 7–MILD combustion, Numerical Modeling of Turbulent Combustion, ed. by P. Domingo and L. Vervisch, Computation and Analysis of Turbulent Flows, Academic Press, , p 325–375, (2025) https://www.sciencedirect.com/science/article/pii/B978044329158600013610.1016/B978-0-44-329158-6.00013-6 ↗
58. M.O. Conaire, H.J. Curran, J.M. Simmie, W.J. Pitz, and C.K. Westbrook, A Comprehensive Modeling Study of Hydrogen Oxidation, Int. J. Chem. Kinet., 2004, 36(11), p 603–622.10.1002/kin.20036 ↗
59. S. Pope, Computationally Efficient Implementation of Combustion Chemistry using In situ Adaptive Tabulation, Combust. Theory Model., 1997, 1, p 41–63.10.1080/713665229 ↗
60. S.V. Patankar and D.B. Spalding, A Calculation Procedure for Heat, Mass and Momentum Transfer in Three-Dimensional Parabolic Flows, Int. J. Heat Mass Transfer, 1972, 15(10), p 1787–1806.10.1016/0017-9310(72)90054-3 ↗
61. B. van Leer, Towards the Ultimate Conservative Difference Scheme. V. A Second-Order Sequel to Godunov’s Method, J. Comput. Phys., 1979, 32(1), p 101–136.10.1016/0021-9991(79)90145-1 ↗
62. T. Barth and D. Jespersen, The Design and Application of Upwind Schemes on Unstructured Meshes, in 27th Aerospace Sciences Meeting, eprint https://arc.aiaa.org/doi/pdf/https://doi.org/10.2514/6.1989-36610.2514/6.1989- ↗
63. Material Product Data Sheet, Tungsten Carbide–10% Cobalt 4% Chromium Powders, DSM-0221.3–86WC-10Co-4Cr Agglomerated and Sintered Powders, Oerlikon-Metco, (2021)
64. G. Nolan and P. Kavanagh, Computer Simulation of Random Packings of Spheres with Log-Normal Distributions, Powder Technol., 1993, 76(3), p 309–316.10.1016/S0032-5910(05)80012-9 ↗
65. V. Sobolev, J. Guilemany, J. Garmier, and J. Calero, Modeling of Particle Movement and Thermal Behavior during High-Velocity Oxy-Fuel Spraying, Surf. Coatings Technol., 1994, 63(3), p 181–187.10.1016/0257-8972(94)90096-5 ↗
66. R. Andon, J. Martin, K. Mills, and T. Jenkins, Heat Capacity and Entropy of Tungsten Carbide, J. Chem. Thermodyn., 1975, 7(11), p 1079–1084.10.1016/0021-9614(75)90241-4 ↗
67. M.W. Chase, NIST-JANAF Thermochemical Tables, J. Physic. Chem. Ref. Data., 1998, 28, p 1951.
68. G. Mauer, R. Vaßen, and D. Stöver, Comparison and Applications of DPV-2000 and Accuraspray-g3 Diagnostic Systems, J. Thermal. Spray. Technol., 2007, 16(3), p 414–424.10.1007/s11666-007-9047-2 ↗
69. A. Dolatabadi, J. Mostaghimi, and V. Pershin, Effect of a Cylindrical Shroud on Particle Conditions in High Velocity Oxy-Fuel (HVOF) Spray Process, J. Mater. Process. Technol., 2003, 137, p 214–224.10.1016/S0924-0136(02)01084-1 ↗
70. A. Dolatabadi, J. Mostaghimi, and V. Pershin, Modeling Dense Suspension of Solid Particles in Highly Compressible Flows, Int. J. Comput. Fluid Dyn., 2004, 18(2), p 125–131.10.1080/10618560310001634221 ↗
71. M.S. Chong, A.E. Perry, and B.J. Cantwell, A General Classification of Three-Dimensional Flow Fields, Phys. Fluids A, 1990, 2(5), p 765–777.10.1063/1.857730 ↗