An experimental study on interfacial fracture toughness of 3-D printed ABS/CF-PLA composite under mode I, II, and mixed-mode loading
Source abstract
Abstract
Multimaterial structures made using fused deposition modeling (FDM) offer an attractive prospect for enhancing their mechanical properties and functionality. In this study, the interfacial fracture toughness of a unidirectional hybrid composite fabricated by FDM was studied through mechanical testing. The composite structure comprises acrylonitrile butadiene styrene and carbon fiber-reinforced polylactic acid. Since, de-adhesion or bond failure at the interface can occur under a combination of the different fracture modes, therefore, interfacial fracture toughness, in terms of the critical energy release rate, was characterized using double cantilever beam specimen test for mode I, end-notched flexural specimen test for mode II, and mixed-mode bending specimen test for mixed-mode I/II. Effects of varying process parameters, like printing speed and nozzle temperature, on the interfacial fracture toughness in mode I and II were also investigated. It was found that increasing the nozzle temperature and printing speed enhance the fracture toughness, both in mode I and II, but the effect of increasing nozzle temperature on mode II fracture toughness was quite significant.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Additive Manufacturing Materials and Processes · Manufacturing Process and Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Faculty of Mechanical Engineering, GIK Institute of Engineering Sciences & Technology, Topi, Pakistan
References (38)
Show source-provided references
1. 10.1080/17452759.2015.109705310.1080/17452759.2015.1097053 ↗
2. 10.12924/of2015.0101001910.12924/of2015.01010019 ↗
3. 10.1016/j.ast.2016.12.01910.1016/j.ast.2016.12.019 ↗
4. 10.1016/j.proeng.2016.07.35710.1016/j.proeng.2016.07.357 ↗
5. 10.1016/j.jmst.2016.08.01110.1016/j.jmst.2016.08.011 ↗
6. Li L · 400
7. 10.1016/j.mspro.2014.07.14610.1016/j.mspro.2014.07.146 ↗
8. 10.1016/j.addma.2017.09.00310.1016/j.addma.2017.09.003 ↗
9. 10.3390/ma809527110.3390/ma8095271 ↗
10. 10.3390/polym1003031310.3390/polym10030313 ↗
11. Christiyan KJ · 114 · 012109
12. 10.1016/j.matdes.2015.06.05310.1016/j.matdes.2015.06.053 ↗
13. Khatri A · 9 · V009T12A064
14. 10.1007/s11664-014-3425-610.1007/s11664-014-3425-6 ↗
15. 10.4236/jmmce.2011.101309910.4236/jmmce.2011.1013099 ↗
16. 10.1016/j.addma.2018.02.02310.1016/j.addma.2018.02.023 ↗
17. 10.1177/00219983710050021110.1177/002199837100500211 ↗
18. 10.1002/app.4540110.1002/app.45401 ↗
19. 10.1016/j.polymertesting.2018.01.00210.1016/j.polymertesting.2018.01.002 ↗
20. 10.1016/j.matdes.2018.07.00110.1016/j.matdes.2018.07.001 ↗
21. 10.1080/1745275070133648610.1080/17452750701336486 ↗
22. 10.1108/RPJ-07-2014-008310.1108/RPJ-07-2014-0083 ↗
23. 10.1016/j.engfracmech.2017.03.02810.1016/j.engfracmech.2017.03.028 ↗
24. 10.1016/j.matdes.2018.07.00610.1016/j.matdes.2018.07.006 ↗
25. 10.5772/316210.5772/3162 ↗
26. 10.1016/j.procir.2017.03.17110.1016/j.procir.2017.03.171 ↗
27. Proto-Pasta Carbon Fiber Reinforced PLA Filament - 1.75 mm (0.5 kg), https://www.matterhackers.com/store/3d-printer-filament/proto-pasta-carbon-fiber-reinforced-pla-175mm-075-kg (accessed 6 August 2019).
28. 10.1016/j.compositesb.2017.05.01310.1016/j.compositesb.2017.05.013 ↗
29. ASTM Standard D3039/D3039M-14 · 2014
30. ASTM Standard D3518/D3518M-13 · 2013
31. ASTM Standard D5528-13 · 2013
32. ASTM Standard D7905/D7905M-14 · 2014
33. ASTM Standard D6671/D6671M-13 · 2013
34. 10.1177/002199831664616910.1177/0021998316646169 ↗
35. Kuznetsov VE · Rapid Prototyp J
36. Ebubekir C · 218
37. 10.1108/1355254081086202810.1108/13552540810862028 ↗
38. 10.3390/ma1109176010.3390/ma11091760 ↗