journal article·2022-10

Morphological and thermal properties of polystyrene composite reinforced with biochar from elephant grass ( Pennisetum purpureum )

Adewale George Adeniyi, Sulyman Age Abdulkareem, Joshua O Ighalo, Damilola Victoria Onifade, Samson Akorede Adeoye, Abia Elizabeth Sampson

Publisher page

Abstract

The use of wastes in the development of useful material is a key aspect of solid waste management. The aim of this study was to utilize biochar from elephant grass ( Pennisetum purpureum) as fillers in polystyrene composites with focus on the morphological and thermal properties of the developed composites. The composites were prepared by hand lay-up technique. The prepared resin and final composite were characterized using scanning electron microscopy, differential scanning calorimetry and Fourier-transform infrared spectroscopy. The biochar also did not contain any reactive hydrophilic groups, thus, it is compatible with polystyrene. Estimated heat capacities of the composites from the thermal test results showed that to obtain a composite of heat capacity range between 600 J/kg·K and 760 J/kg·K, a 10–30 wt% range of biochar composition should be maintained. At 30 wt% biochar composition, heat capacity was at a maximum value of 757.66 J/kg·K.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Thermochemical Biomass Conversion Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Chemical Engineering, Faculty of Engineering and Technology, University of Ilorin, Ilorin, Nigeria

References (38)

Show source-provided references
1. Hoornweg D · 2012 · 15
2. USEPA · 2012
3. Matthew J · 2010
4. Guarav MM · Int J Mech Prod Eng · 2014 · 2 · 104
5. Aminudin E · 113
6. Srinivasababu N · Int J Eng · 2010 · 3 · 403
7. 10.1016/j.compositesb.2019.10730510.1016/j.compositesb.2019.107305 ↗
8. Thiruchitrambalam M · Mater Phys Mech · 2009 · 8 · 165
9. 10.1515/polyeng-2019-008510.1515/polyeng-2019-0085 ↗
10. Saeed U · J Thermoplast Compos Mater
11. 10.1177/089270571879983610.1177/0892705718799836 ↗
12. 10.1007/s10765-010-0774-010.1007/s10765-010-0774-0 ↗
13. Adeniyi AG · Biofuels
14. 10.1007/s42250-020-00119-610.1007/s42250-020-00119-6 ↗
15. Adeniyi AG · Combust Sci Technol
16. 10.33263/Materials22.15015610.33263/Materials22.150156 ↗
17. 10.1002/jsfa.255810.1002/jsfa.2558 ↗
18. 10.1177/089270571880795610.1177/0892705718807956 ↗
19. 10.3390/polym911062810.3390/polym9110628 ↗
20. Zhang Q · J Thermoplast Compos Mater
21. 10.1016/j.wasman.2015.01.01510.1016/j.wasman.2015.01.015 ↗
22. Wypych G · 2009 · 15
23. Kamarullah SH · Malaysian J Anal Sci · 2015 · 19 · 889
24. 10.3390/en805340310.3390/en8053403 ↗
25. 10.1007/s12649-018-0347-110.1007/s12649-018-0347-1 ↗
26. 10.1016/j.biortech.2016.06.08210.1016/j.biortech.2016.06.082 ↗
27. Behazin E · BioResources · 2016 · 11 · 1334
28. Cuthbertson DM · 2018
29. 10.1016/j.wasman.2015.12.00710.1016/j.wasman.2015.12.007 ↗
30. 10.1007/s00267-018-1033-610.1007/s00267-018-1033-6 ↗
31. Hau HK · 2016
32. 10.1177/002199831558977010.1177/0021998315589770 ↗
33. 10.1177/009524431141401110.1177/0095244311414011 ↗
34. 10.3390/polym912064210.3390/polym9120642 ↗
35. Quaranta S · 1
36. 10.4314/njt.v36i3.1810.4314/njt.v36i3.18 ↗
37. 10.1177/089270571878569110.1177/0892705718785691 ↗
38. 10.1002/pc.2245210.1002/pc.22452 ↗