journal article·2018-08

Bagasse composites

Wei Xiong

Publisher page

Abstract

This study provides a bibliographic review for future reference in the broad field of bagasse composites by looking for factors that influence their attributes. As an abundant agriculture resource, sugarcane bagasse has attracted extensive research interests because of its high annual yields, low costs, and environmental-friendly characters. During these research, various parameters have been tested to identify their effects; however, these studies are carried out dispersedly. This review provides a summary of these factors, their impacts, and mechanisms. Three factors are used to explain the attributes of bagasse composites followed by the factors involved in preparation, modification, and additives and also their influences. Then the best mechanical properties of different bagasse composites and their achieving condition are summarized. Durability is also reviewed. Additionally, competitive application of bagasse composites is defined by comparing their attributes with other natural fiber composites.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Advanced Cellulose Research Studies · Mechanical Engineering and Vibrations Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Mechanical Engineering, Guilin University of Aerospace Technology, Guilin, China

References (84)

Show source-provided references
1. 10.1016/j.compositesa.2011.01.01710.1016/j.compositesa.2011.01.017 ↗
2. 10.1016/j.resconrec.2013.03.00210.1016/j.resconrec.2013.03.002 ↗
3. 10.1007/s10924-006-0042-310.1007/s10924-006-0042-3 ↗
4. 10.1016/j.indcrop.2011.01.01710.1016/j.indcrop.2011.01.017 ↗
5. 10.1177/002199831351425510.1177/0021998313514255 ↗
6. 10.1016/j.carbpol.2003.07.00710.1016/j.carbpol.2003.07.007 ↗
7. 10.1177/089270571038798210.1177/0892705710387982 ↗
8. 10.1016/j.matlet.2007.11.09710.1016/j.matlet.2007.11.097 ↗
9. 10.1016/j.polymertesting.2003.09.00210.1016/j.polymertesting.2003.09.002 ↗
10. 10.1021/jf00115a00910.1021/jf00115a009 ↗
11. 10.1016/j.indcrop.2012.12.01310.1016/j.indcrop.2012.12.013 ↗
12. 10.15376/biores.5.1.43-5410.15376/biores.5.1.43-54 ↗
13. 10.15376/biores.4.4.1455-147610.15376/biores.4.4.1455-1476 ↗
14. 10.1177/073168441558627710.1177/0731684415586277 ↗
15. 10.1177/002199831141838910.1177/0021998311418389 ↗
16. 10.1016/j.compscitech.2008.10.00610.1016/j.compscitech.2008.10.006 ↗
17. 10.15376/biores.5.2.661-67110.15376/biores.5.2.661-671 ↗
18. Kamthai S, Magaraphan R. Thermal and mechanical properties of polylactic acid (PLA) and bagasse carboxymethyl cellulose (CMCB) composite by adding isosorbide diesters. J Econom 2015; 138: 513–531.
19. 10.1016/j.matdes.2011.07.00210.1016/j.matdes.2011.07.002 ↗
20. 10.1016/j.matdes.2009.10.05510.1016/j.matdes.2009.10.055 ↗
21. 10.1016/j.jallcom.2010.02.19010.1016/j.jallcom.2010.02.190 ↗
22. 10.1016/j.jallcom.2009.10.27010.1016/j.jallcom.2009.10.270 ↗
23. 10.1016/j.jallcom.2010.04.05210.1016/j.jallcom.2010.04.052 ↗
24. 10.1016/j.compositesa.2007.01.01410.1016/j.compositesa.2007.01.014 ↗
25. 10.1016/j.carbpol.2013.01.06710.1016/j.carbpol.2013.01.067 ↗
26. 10.1016/j.compscitech.2007.10.00510.1016/j.compscitech.2007.10.005 ↗
27. 10.1177/089270571039724710.1177/0892705710397247 ↗
28. 10.1016/j.biortech.2009.12.07210.1016/j.biortech.2009.12.072 ↗
29. 10.1016/j.indcrop.2006.12.01410.1016/j.indcrop.2006.12.014 ↗
30. 10.15376/biores.8.3.3791-380110.15376/biores.8.3.3791-3801 ↗
31. Santiagoo R, Omar L, Zainal M, . Effects of aminopropyltriethoxysilane (γ-APS) on tensile properties and morphology of polypropylene (PP), recycle acrylonitrile butadiene rubber (NBRr) and sugarcane bagasse (SCB) composites. Scientific Conference of Microscopy Society Malyasia AIP Publishing LLC 2015; 1669(1): 1455–1461.
32. 10.1016/j.compstruct.2015.08.02010.1016/j.compstruct.2015.08.020 ↗
33. 10.15376/biores.6.3.3155-316510.15376/biores.6.3.3155-3165 ↗
34. 10.1177/073168440809422110.1177/0731684408094221 ↗
35. Riyajan S, Intharit I. Characterization of modified bagasse and investigation properties of its novel composite. J Alloys Compd 2009; 475: 658–663.
36. 10.15376/biores.7.4.5381-539010.15376/biores.7.4.5381-5390 ↗
37. 10.1016/j.polymertesting.2005.07.01210.1016/j.polymertesting.2005.07.012 ↗
38. 10.1080/0022234060076754710.1080/00222340600767547 ↗
39. 10.1007/s10924-014-0679-210.1007/s10924-014-0679-2 ↗
40. Basta AH, El-Saied H, Deffallah EM. Optimising the process for production of high performance bagasse-based composites from rice bran-UF adhesive system. Eur J Mark 1972; 43: 212–218.
41. Khushnood RA, Ahmad S, Ferro GA, . Modified fracture properties of cement composites with nano/micro carbonized bagasse fibers. Frattura Ed Integrità Strutt 2015; 9: 534–542.
42. 10.1016/S0958-9465(02)00003-310.1016/S0958-9465(02)00003-3 ↗
43. 10.1016/j.matdes.2011.04.02710.1016/j.matdes.2011.04.027 ↗
44. 10.1016/j.conbuildmat.2015.07.14310.1016/j.conbuildmat.2015.07.143 ↗
45. Aigbodion VS, Hassan SB, Dauda ET, . Experimental study of ageing behaviour of Al–Cu–Mg/bagasse ash particulate composites. Tribol Ind 2011; 33: 28–35.
46. 10.1016/j.indcrop.2012.04.04010.1016/j.indcrop.2012.04.040 ↗
47. 10.15376/biores.5.2.1010-102110.15376/biores.5.2.1010-1021 ↗
48. 10.1016/j.carbpol.2012.04.04310.1016/j.carbpol.2012.04.043 ↗
49. 10.1016/j.pce.2013.08.00610.1016/j.pce.2013.08.006 ↗
50. 10.1016/j.carbpol.2012.03.04410.1016/j.carbpol.2012.03.044 ↗
51. 10.15376/biores.5.4.2097-211110.15376/biores.5.4.2097-2111 ↗
52. 10.1016/j.compositesa.2013.10.01410.1016/j.compositesa.2013.10.014 ↗
53. 10.1016/j.compositesb.2012.07.00410.1016/j.compositesb.2012.07.004 ↗
54. 10.1016/j.foodhyd.2015.04.02310.1016/j.foodhyd.2015.04.023 ↗
55. 10.1002/978047017255110.1002/9780470172551 ↗
56. 10.1163/15685510778232519510.1163/156855107782325195 ↗
57. 10.1177/089270571143335010.1177/0892705711433350 ↗
58. Samariha A, Hemmasi AH, Ghasemi I, . Effect of nanoclay contents on properties, of bagasse flour/reprocessed high density polyethylene/nanoclay composites. Maderas Cienc Tecnol 2015; 17: 637–646.10.4067/S0718-221X2015005000056 ↗
59. 10.1007/s00289-013-1064-310.1007/s00289-013-1064-3 ↗
60. 10.1007/s11029-013-9386-710.1007/s11029-013-9386-7 ↗
61. 10.1177/073168440910284310.1177/0731684409102843 ↗
62. 10.1177/002199831038503010.1177/0021998310385030 ↗
63. 10.15376/biores.6.3.3289-329910.15376/biores.6.3.3289-3299 ↗
64. 10.1300/J237v12n01_0410.1300/J237v12n01_04 ↗
65. 10.1016/j.conbuildmat.2011.03.05210.1016/j.conbuildmat.2011.03.052 ↗
66. 10.1177/09673911120200071010.1177/096739111202000710 ↗
67. 10.1007/s11029-013-9361-310.1007/s11029-013-9361-3 ↗
68. 10.1016/j.compositesb.2012.10.04610.1016/j.compositesb.2012.10.046 ↗
69. 10.1016/j.carbpol.2012.10.01010.1016/j.carbpol.2012.10.010 ↗
70. 10.1177/073168440810069310.1177/0731684408100693 ↗
71. Kord B. Effects of compatibilizer and nanolayered silicate on physical and mechanical properties of PP/bagasse composites. Turkish J Agric For 2012; 36: 510–517.
72. 10.1177/002199831456148410.1177/0021998314561484 ↗
73. 10.1007/s10904-010-9398-x10.1007/s10904-010-9398-x ↗
74. 10.1177/009524430809501410.1177/0095244308095014 ↗
75. 10.15376/biores.5.2.650-66010.15376/biores.5.2.650-660 ↗
76. 10.1081/PPT-12000437010.1081/PPT-120004370 ↗
77. 10.1016/j.matchar.2007.10.01110.1016/j.matchar.2007.10.011 ↗
78. 10.1177/073168440934059610.1177/0731684409340596 ↗
79. 10.15376/biores.7.4.5258-526710.15376/biores.7.4.5258-5267 ↗
80. 10.1007/s10973-010-1079-z10.1007/s10973-010-1079-z ↗
81. 10.1080/0360255070129866310.1080/03602550701298663 ↗
82. 10.1016/j.carbpol.2008.07.02810.1016/j.carbpol.2008.07.028 ↗
83. 10.1016/j.carbpol.2009.11.00210.1016/j.carbpol.2009.11.002 ↗
84. 10.15376/biores.5.3.1605-161710.15376/biores.5.3.1605-1617 ↗