journal article·2024-02

Multiobjective optimization of tribological characteristics of 3D printed texture surfaces for ABS and PLA Polymers

Vishal Mourya, Skylab P Bhore, Parag G Wandale

Publisher page

Abstract

In this paper, the 3D-printed textured samples are fabricated using fused deposition modelling (FDM) process for two different polymers such as ABS and PLA. The primary objective of this study is to investigate the influence of printing parameters on the tribological characteristics of 3D-printed textured samples. Here, the four major FDM printing parameters such as layer thickness (LT), nozzle temperature (NT), line width (LW) and printing speed (PS) are considered for the study. Whereas, the tribological characteristics of 3D-printed textured sample such as wear rate and friction coefficient are considered as output responses. The present experimental study is carried out based on the response surface methodology to evaluate the effect of these FDM printing parameters on the tribological characteristics of textured samples. These experimental results show that the line width is the most significant printing parameter followed by layer thickness. Whereas, the printing speed is the third most significant printing parameter. Furthermore, the optimized value of printing parameters for ABS and PLA are evaluated by using grey relational analysis. For the ABS polymer, the optimal value of printing parameters as layer thickness = 0.1 mm, nozzle temperature = 230°C, line width = 0.28 mm and printing speed = 75 mm/s. Whereas, for the PLA, the optimal value of printing parameters are: layer thickness = 0.14 mm, nozzle temperature = 220°C, line width = 0.31 mm, and printing speed = 50 mm/s. In addition, However, the wear rate first decreases with the layer thickness and nozzle temperature and then increases. The wear rate linearly increases with the printing speed.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Manufacturing Process and Optimization · Injection Molding Process and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering, Rotor Dynamics and Diagnostics Lab, Motilal Nehru National Institute of Technology, Allahabad, India

References (61)

Show source-provided references
1. 10.1016/j.promfg.2019.06.08910.1016/j.promfg.2019.06.089 ↗
2. 10.1155/2019/965693810.1155/2019/9656938 ↗
3. 10.1016/j.mattod.2017.07.00110.1016/j.mattod.2017.07.001 ↗
4. Ventola CL · Phar Therapeutics · 2014 · 39 · 704
5. 10.5114/kitp.2016.6262510.5114/kitp.2016.62625 ↗
6. 10.1108/1355254021044116610.1108/13552540210441166 ↗
7. 10.1016/j.jmatprotec.2005.02.25910.1016/j.jmatprotec.2005.02.259 ↗
8. 10.1007/s00170-010-2821-110.1007/s00170-010-2821-1 ↗
9. 10.1016/j.polymertesting.2018.09.00910.1016/j.polymertesting.2018.09.009 ↗
10. 10.1016/j.matpr.2021.09.13910.1016/j.matpr.2021.09.139 ↗
11. 10.1016/j.matpr.2019.09.07810.1016/j.matpr.2019.09.078 ↗
12. 10.1016/j.polymertesting.2019.10594810.1016/j.polymertesting.2019.105948 ↗
13. 10.1016/j.cja.2020.05.04010.1016/j.cja.2020.05.040 ↗
14. 10.1002/pen.2535310.1002/pen.25353 ↗
15. 10.3390/ma1317385010.3390/ma13173850 ↗
16. 10.1177/089270572095319310.1177/0892705720953193 ↗
17. 10.1177/089270572092511410.1177/0892705720925114 ↗
18. 10.1177/089270571139984810.1177/0892705711399848 ↗
19. 10.1177/089270571881552910.1177/0892705718815529 ↗
20. 10.1016/j.jmapro.2018.11.02310.1016/j.jmapro.2018.11.023 ↗
21. 10.1038/s41598-022-05005-410.1038/s41598-022-05005-4 ↗
22. 10.1016/j.polymertesting.2018.05.02010.1016/j.polymertesting.2018.05.020 ↗
23. 10.3390/jmmp303006410.3390/jmmp3030064 ↗
24. 10.1016/j.matpr.2020.05.48410.1016/j.matpr.2020.05.484 ↗
25. 10.1515/eng-2021-006310.1515/eng-2021-0063 ↗
26. 10.1007/s12633-022-01712-910.1007/s12633-022-01712-9 ↗
27. 10.1088/2053-1591/abc8bd10.1088/2053-1591/abc8bd ↗
28. 10.1016/S1526-6125(01)70124-710.1016/S1526-6125(01)70124-7 ↗
29. 10.1177/135065012092560110.1177/1350650120925601 ↗
30. 10.1023/A:101660740039210.1023/A:1016607400392 ↗
31. 10.1016/S0043-1648(01)00741-410.1016/S0043-1648(01)00741-4 ↗
32. 10.1016/j.jmatprotec.2007.02.01910.1016/j.jmatprotec.2007.02.019 ↗
33. 10.1016/j.wear.2008.11.00310.1016/j.wear.2008.11.003 ↗
34. 10.1515/978311036705810.1515/9783110367058 ↗
35. 10.1002/978111856209310.1002/9781118562093 ↗
36. Davim JP · 2021
37. 10.1088/1361-665X/ab3d1810.1088/1361-665X/ab3d18 ↗
38. 10.1016/j.addma.2021.10249610.1016/j.addma.2021.102496 ↗
39. Lužanin O · J Technol Plasticity · 2014 · 39 · 49
40. Sukindar NA · J Teknologi · 2016 · 78
41. Khondoker MAH · Red · 2018 · 75 · 48
42. 2016
43. 10.1108/RPJ-03-2022-008110.1108/RPJ-03-2022-0081 ↗
44. 10.1177/1350650123115352110.1177/13506501231153521 ↗
45. 10.30855/gmbd.070504110.30855/gmbd.0705041 ↗
46. 10.1007/978-3-030-68024-4_2610.1007/978-3-030-68024-4_26 ↗
47. 10.1371/journal.pone.010825210.1371/journal.pone.0108252 ↗
48. 10.1016/j.matdes.2017.03.06510.1016/j.matdes.2017.03.065 ↗
49. 10.1177/089270572096456010.1177/0892705720964560 ↗
50. 10.1177/089270571984724410.1177/0892705719847244 ↗
51. 10.3390/polym1406122210.3390/polym14061222 ↗
52. Mikhin N · Izvestiya Vysshikh Uchebnykh Zavedenii Fizika · 1971 · 146
53. 10.1177/089270572096456010.1177/0892705720964560 ↗
54. Abeykoon C · Int J Lightweight Mat Manufact · 2020 · 3 · 284
55. 10.1007/s12008-021-00827-410.1007/s12008-021-00827-4 ↗
56. Renganathan S · Adv Mat Proce Technol · 2022 · 8 · 1583
57. 10.24874/ti.1334.07.22.1110.24874/ti.1334.07.22.11 ↗
58. 10.1088/2631-8695/ac612110.1088/2631-8695/ac6121 ↗
59. 10.1016/j.biotri.2023.10024110.1016/j.biotri.2023.100241 ↗
60. 2012
61. 10.7717/peerj-cs.62310.7717/peerj-cs.623 ↗