journal article·2023-06Open access

A review of mode I dominant interfacial fracture toughness test methods of skin-core bonding for thermoplastic composite sandwich structures

Felix Weidmann, Gerhard Ziegmann, Jürgen Wieser

Abstract

Increased lightweight design via composite sandwich structures is a promising approach due to their exceptionally high weight-specific mechanical properties. The involved high cost when using sandwich composite structures has hindered applications in cost-sensitive markets up to now. However, full thermoplastic composite sandwich structures enable a cost reduction using novel processing routes based on fusion bonding of core and facesheet. In order to optimize such full thermoplastic composite sandwich structures and to ensure proper bonding of facesheet and core after manufacture, valid test methods for the quantification of skin-core interfacial bonding are required. This paper reviews existing test methods for the determination of Mode I dominant interfacial fracture toughness of sandwich structures. The main focus is set on cantilever beam tests as well as on peel tests. Based on a definition of requirements for suitable test methods, their applicability for full thermoplastic composite sandwich structures is evaluated. The Mandrel Peel Test results as most promising test method for thermoplastic sandwich structures, especially with thin facesheets.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Mechanical Behavior of Composites · Structural Analysis of Composite Materials · Composite Structure Analysis and Optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Fraunhofer Institute for Structural Durability and System Reliability LBF

Clausthal University of Technology

University of Applied Sciences Darmstadt

Funding

Horizon 2020 Framework Programme

References (100+)

Show source-provided references
1. European Parliament. New Passenger Cars and for New Light Commercial Vehicles, and Repealing Regulations (EC) No 443/2009 and (EU) No 510/2011 (Recast) (Text with EEA Relevance), 2019. Regulation (EU) 2019/631 of the European Parliament and of the Council of 17 April 2019 setting CO2 emission performance standards for.
2. Cetin M, Thienel M. Large-series production of thermoplastic door module carriers. Lightweight Des Worldwide 2019; 12: 12–17.10.1007/s41777-019-0052-1 ↗
3. Häffelin D, Wagener K, Beutler O, et al. Lightweight Design on the Move: All-Plastic Brake Pedal with Multiaxial Fiber Reinforcement in Series Production. Kunststoffe, 2017.
4. Siebel T. All-Plastic Brake Pedal Suitable for Large-Scale Production. Online, 2020.
5. 10.1007/s38311-014-0160-910.1007/s38311-014-0160-9 ↗
6. 10.1109/EVER.2017.793595510.1109/EVER.2017.7935955 ↗
7. Grünewald J, Orth T, Parlevliet P, et al. Modified foam cores for full thermoplastic composite sandwich structures. Jnl Sandwich Struc Mater 2017; 6: 109963621770874.
8. 10.1177/089270571560468110.1177/0892705715604681 ↗
9. Menrath A, Henning F, Huber T, et al. Foam-injected sandwich panels with continuous-reinforced facings. In: proceedings of PPS-29: The 29th International Conference of the Polymer Processing Society-Conference Papers, Nuremberg, Germany. American Institute of Physics; 2013, pp. 477–481.
10. 10.1177/089270570606791810.1177/0892705706067918 ↗
11. Neumeyer T, Knoechel JF, Mühlbacher M, et al. Thermoplastic Sandwich Structures-Processing Approaches towards Automotive Serial Production, 2017.
12. 10.1016/S1359-835X(99)00079-210.1016/S1359-835X(99)00079-2 ↗
13. 10.1177/109963620404009410.1177/1099636204040094 ↗
14. 10.1177/08927057990120040410.1177/089270579901200404 ↗
15. 10.1051/matecconf/2016670608210.1051/matecconf/20166706082 ↗
16. 10.1177/10996362990010030310.1177/109963629900100303 ↗
17. 10.1088/1757-899X/480/1/01201210.1088/1757-899X/480/1/012012 ↗
18. Weidmann F. On the in-Situ Manufacture of Thermoplastic Sandwich Structures with Continuous Fibre Reinforced Facesheets and integral Foam Cores. Dissertation, TU Clausthal. Clauthal, 2020.
19. 10.1002/pc.2002510.1002/pc.20025 ↗
20. McGarva LD. Thermoplastic Composite Sandwich Components: Experimental and Numerical Investigation of Manufacturing Issues. Stockholm: Dissertation, 2002.
21. 10.1002/adv.2018610.1002/adv.20186 ↗
22. 10.1016/j.repl.2016.03.00210.1016/j.repl.2016.03.002 ↗
23. Grünewald J. Thermoplastic Composite Sandwiches for Structural Helicopter Applications. Bayreuth: Universität Bayreuth, 2018.
24. 10.1177/109963620404009310.1177/1099636204040093 ↗
25. 10.31399/asm.hb.v21.a000338810.31399/asm.hb.v21.a0003388 ↗
26. 10.1016/j.trpro.2016.05.08110.1016/j.trpro.2016.05.081 ↗
27. 10.1016/j.ijmecsci.2004.04.00310.1016/j.ijmecsci.2004.04.003 ↗
28. Wiedemann J. Leichtbau: Elemente und Konstruktion. 3. Auflage. Berlin, Heidelberg: Springer-Verlag Berlin Heidelberg, 2007.
29. 10.1016/B978-0-08-012870-2.50012-210.1016/B978-0-08-012870-2.50012-2 ↗
30. 10.1016/j.compositesb.2012.04.05210.1016/j.compositesb.2012.04.052 ↗
31. 10.1016/j.compositesa.2010.09.00510.1016/j.compositesa.2010.09.005 ↗
32. 10.1016/S1359-835X(96)00098-X10.1016/S1359-835X(96)00098-X ↗
33. Åström BT, Åkermo M, Carlsson A, et al. (eds). All-thermoplastic sandwich concept; 1998.
34. 10.1002/pc.1018310.1002/pc.10183 ↗
35. 10.1002/pc.1018210.1002/pc.10182 ↗
36. Vieille B, Casado VM, Bouvet C. Comparative study on the impact behavior and damage tolerance of woven carbon fiber reinforced thermoplastic– and thermosetting– composites. In: ECCM15 - 15th European conference on composite materials. Venice, Italy. 2012, pp. 24–28.
37. 10.1007/BF0013368310.1007/BF00133683 ↗
38. 10.1177/00219980177266139910.1177/002199801772661399 ↗
39. Adams D, Nelson J, Bluth Z (eds). Development and Evaluation of Fracture Mechanics Test Methods for Sandwich Composites; 2012.
40. Ratcliffe JG. Sizing a Single Cantilever Beam Specimen for Characterizing Facesheet–Core Debonding in Sandwich Structure. NASA/TP–2010-216169. National Institute of Aerospace, Langley Research Center, 2010.
41. 10.1177/002199831140111610.1177/0021998311401116 ↗
42. 10.17221/35/2009-RAE10.17221/35/2009-RAE ↗
43. 10.1016/j.compstruct.2012.08.05910.1016/j.compstruct.2012.08.059 ↗
44. Adams D, Bluth Z, Braegger R. Development and Evaluation of Fracture Mechanics Test Methods for Sandwich Composites. Utah, 2013.
45. Gross D, Seelig T. Bruchmechanik: Mit einer Einführung in die Mikromechanik ; mit 8 Tabellen. 4., bearb. Aufl. Berlin: Springer, 2007.
46. 10.3990/1.978903653392810.3990/1.9789036533928 ↗
47. 10.1785/BSSA049002019910.1785/BSSA0490020199 ↗
48. 10.1115/1.362581410.1115/1.3625814 ↗
49. 10.1115/1.362581610.1115/1.3625816 ↗
50. 10.1115/1.362581310.1115/1.3625813 ↗
51. 10.1016/S0266-3538(99)00065-210.1016/S0266-3538(99)00065-2 ↗
52. ASTM D5528. Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites. West Conshohocken, PA: ASTM International, 2022.
53. 10.1016/B978-0-08-040505-6.50037-410.1016/B978-0-08-040505-6.50037-4 ↗
54. 10.1016/0921-5093(89)90382-110.1016/0921-5093(89)90382-1 ↗
55. Hutchinson JW, Suo Z. Mixed Mode Cracking in Layered Materials. Adv Appl Mech, 29. Elsevier, 1991, pp. 63–191.
56. 10.1016/j.compositesb.2020.10853710.1016/j.compositesb.2020.108537 ↗
57. 10.1115/1.317366810.1115/1.3173668 ↗
58. 10.1098/rspa.1930.005810.1098/rspa.1930.0058 ↗
59. 10.1063/1.173552410.1063/1.1735524 ↗
60. 10.1016/0013-7944(94)90061-210.1016/0013-7944(94)90061-2 ↗
61. 10.1016/j.compscitech.2010.04.01810.1016/j.compscitech.2010.04.018 ↗
62. 10.1177/109963620504708510.1177/1099636205047085 ↗
63. 10.1243/03093247V24420710.1243/03093247V244207 ↗
64. 10.1177/00219983910250010510.1177/002199839102500105 ↗
65. 10.1016/0013-7944(93)90100-710.1016/0013-7944(93)90100-7 ↗
66. 10.1016/j.engfracmech.2007.03.04510.1016/j.engfracmech.2007.03.045 ↗
67. 10.1177/10996362000020010110.1177/109963620000200101 ↗
68. 10.1007/BF0241088510.1007/BF02410885 ↗
69. 10.1007/BF0003595810.1007/BF00035958 ↗
70. 10.1016/0266-3538(89)90058-410.1016/0266-3538(89)90058-4 ↗
71. 10.1016/S0013-7944(02)00024-310.1016/S0013-7944(02)00024-3 ↗
72. 10.1016/S0266-3538(02)00255-510.1016/S0266-3538(02)00255-5 ↗
73. 10.1177/002199830404239210.1177/0021998304042392 ↗
74. Gill A. Development and Evaluation of Fracture Mechanics Test Methods for Sandwich Composites. Seattle, 2008.
75. 10.1016/j.matdes.2019.10831210.1016/j.matdes.2019.108312 ↗
76. Weaver C. Evaluation of Mode I Fracture Mechanics Test Methods for Sandwich Composites. Salt lake City: Master Thesis, University of Utah, 2009.
77. 10.1016/j.compstruct.2019.11094210.1016/j.compstruct.2019.110942 ↗
78. 10.1088/2053-1591/aafc0210.1088/2053-1591/aafc02 ↗
79. 10.1115/1.317607810.1115/1.3176078 ↗
80. 10.1016/0013-7944(94)90062-010.1016/0013-7944(94)90062-0 ↗
81. 10.1177/07316844960150110710.1177/073168449601501107 ↗
82. 10.1177/10996362990010010410.1177/109963629900100104 ↗
83. 10.1007/BF0027816210.1007/BF00278162 ↗
84. 10.2514/1.556710.2514/1.5567 ↗
85. Grenestedt JL. The Tilted Sandwich Debond Specimen (Personal Communication). Stockholm, Sweden: Royal Institute of Technology, 2020.
86. Kessler J, Adams D. Development and Evaluation of Fracture Mechanics Test Methods for Sandwich Composites. Wichita, 2009.
87. Adams D. Development and Evaluation of Fracture Mechanics Test Methods for Sandwich Composites. Baltimore, MD, 2011.
88. 10.1016/S1359-835X(99)00028-710.1016/S1359-835X(99)00028-7 ↗
89. Adams DF, Czabaj M, Stanfield M. Fracture Mechanics Test Methods for Sandwich Composites, 2017.
90. Saseendran V, Berggreen C, Schäuble R, et al. Disbond of Sandwich Structures - DoSS: EASA, 2016.
91. 10.1177/109963620300500202010.1177/1099636203005002020 ↗
92. 10.1108/eb03226810.1108/eb032268 ↗
93. 10.1016/j.ijadhadh.2007.01.00110.1016/j.ijadhadh.2007.01.001 ↗
94. 10.1016/j.polymertesting.2017.12.00510.1016/j.polymertesting.2017.12.005 ↗
95. Kok T, Grouve W, Warnet LL, et al. (eds). Effect of ply orientation on bond strength in fiber-placed composites; 2015.
96. 10.1177/096739111880920510.1177/0967391118809205 ↗
97. 10.1016/j.compositesb.2016.03.05510.1016/j.compositesb.2016.03.055 ↗
98. 10.1016/j.ijadhadh.2016.10.00710.1016/j.ijadhadh.2016.10.007 ↗
99. 10.1007/s40430-017-0959-610.1007/s40430-017-0959-6 ↗
100. 10.1016/j.ijadhadh.2017.09.01210.1016/j.ijadhadh.2017.09.012 ↗