journal article·2024-10

Effect of process parameters on tensile properties of 3D printed continuous aramid fiber reinforced nylon 12 composites

Xibin Jiang, Zhongde Shan, Yong Zang, Feng Liu, Xiaochuan Wu, Ailing Zou

Publisher page

Abstract

Continuous fiber reinforced thermoplastic composites (CFRTP) have been increasingly used in aerospace and rail transport in recent years because of their high strength and light weight. In this paper, the effects of nozzle temperature, printing speed, substrate temperature and layer thickness on the tensile properties and macro/microscopic damage modes of CAF/PA12 printed specimens was systematically investigated. The fiber volume fraction(FVF) of CAF/PA12 filaments was 25.62%. The maximum average tensile strength and tensile modulus of CAF/PA12 printed specimens reached 572.60 MPa and 18.49 GPa, respectively. The results of the cross-sectional analysis indicated that filament toothed fractures and transverse cracks were the main macroscopic failure modes of CAF/PA12 composites. In SEM images, the main microscopic failure modes of CAF/PA12 composite are fiber fracture, fiber pull-out pores and unimpregnated fibers.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Recycling and Waste Management Techniques · Innovations in Concrete and Construction Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Mechanical Engineering, University of Science and Technology Beijing, Beijing, China

State Key Laboratory of Advanced Forming Technology and Equipment, China Academy of Machinery Science and Technology, Beijing, China

Nanjing University of Aeronautics and Astronautics, Nanjing, China

Funding

the National Defense Science and technology foundation strengthening plan and the Strategic Research and Consulting Project of Chinese Academy of Engineering · Technology Development Fund of China Academy of Machinery Science and Technology · National Key Research and Development Program of China

References (29)

Show source-provided references
1. 10.1016/j.memsci.2016.10.00610.1016/j.memsci.2016.10.006 ↗
2. 10.1108/0144515031069863410.1108/01445150310698634 ↗
3. 10.1016/j.matdes.2009.07.04510.1016/j.matdes.2009.07.045 ↗
4. 10.1108/RPJ-01-2013-001210.1108/RPJ-01-2013-0012 ↗
5. 10.1016/S0921-5093(00)01810-410.1016/S0921-5093(00)01810-4 ↗
6. Ning F · J Compos Mater · 2016 · 28 · 1
7. 10.1016/j.matdes.2017.11.02710.1016/j.matdes.2017.11.027 ↗
8. 10.1016/j.compscitech.2016.02.02110.1016/j.compscitech.2016.02.021 ↗
9. 10.1016/j.compscitech.2014.10.00910.1016/j.compscitech.2014.10.009 ↗
10. 10.1016/j.compositesb.2021.10914310.1016/j.compositesb.2021.109143 ↗
11. 10.1016/j.compstruct.2017.08.08810.1016/j.compstruct.2017.08.088 ↗
12. 10.1016/j.compositesb.2016.11.03410.1016/j.compositesb.2016.11.034 ↗
13. 10.1016/j.jmatprotec.2016.07.02510.1016/j.jmatprotec.2016.07.025 ↗
14. 10.1007/s11665-016-2459-810.1007/s11665-016-2459-8 ↗
15. 10.1016/j.compositesa.2020.10577010.1016/j.compositesa.2020.105770 ↗
16. 10.1007/s10853-017-1624-210.1007/s10853-017-1624-2 ↗
17. 10.1016/j.compositesb.2019.10714710.1016/j.compositesb.2019.107147 ↗
18. 10.1016/j.compstruct.2021.11373810.1016/j.compstruct.2021.113738 ↗
19. 10.1016/j.compscitech.2022.10934110.1016/j.compscitech.2022.109341 ↗
20. 10.1016/j.compscitech.2019.10768810.1016/j.compscitech.2019.107688 ↗
21. 10.1016/j.compstruct.2016.07.01810.1016/j.compstruct.2016.07.018 ↗
22. 10.1016/j.compstruct.2021.11497510.1016/j.compstruct.2021.114975 ↗
23. 10.1016/j.tws.2021.10771710.1016/j.tws.2021.107717 ↗
24. 10.1016/j.compositesa.2016.05.03210.1016/j.compositesa.2016.05.032 ↗
25. 10.1016/j.addma.2021.10211210.1016/j.addma.2021.102112 ↗
26. 10.1177/0892705721100645910.1177/08927057211006459 ↗
27. 10.1016/j.addma.2018.04.03910.1016/j.addma.2018.04.039 ↗
28. Zou A · IOP Publishing · 2021 · 1986 · 012013
29. 10.1016/S0266-3538(96)00072-310.1016/S0266-3538(96)00072-3 ↗