Preparation and characterization of nanocellulose fiber (CNF) by biological enzymatic method
Source abstract
Abstract
In this paper, using Styphnolobium japonicum, Cryptomeria fortunei and Pinus yunnanensis as raw materials, cellulose (CE) was first extracted by chemical method (CM1) and biological enzymatic method 2 (BM2), and then further prepared into nanocellulose fiber (CNF) by biological enzymatic method 1(CPM (CPM stands for cellulase and pectinase)). The CE and CNF were characterized by FTIR, XRD, SEM, DSC and TG. The results showed that the CNF prepared by CM1-CPM was cellulose type II, CNF prepared by BM2-CPM was cellulose type I. The best crystallinity of the CNF prepared by CM1-CPM reached 74.1% ( C. fortunei CNF), the best yield was 24.0% ( S. japonicum CNF) and the minimum average diameter was 62.6 nm ( C. fortunei CNF). However, the best crystallinity of CNF prepared by BM2-CPM reached 80.1% ( C. fortunei CNF), the best yield was 27.4% ( C. fortunei CNF), and the minimum average diameter was 31.6 nm ( C. fortunei CNF). And also, the thermal degradation analysis of the CNF prepared from the three raw materials revealed that the CNF prepared by BM2-CPM had better thermal degradability. Finally, the thermal stability analysis of the C. fortunei CNF was carried out, and it was found that the residual mass of CNF prepared by BM2-CPM was 48%, while the residual mass of C. fortunei CNF prepared by BM1-CPM was 22%, which showed the C. fortunei CNF prepared by BM2-CPM had better thermal stability. Therefore, the properties of nanocellulose prepared by BM2-CPM are optimal.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Cellulose Research Studies · Biofuel production and bioconversion · Polysaccharides and Plant Cell Walls
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Yunnan Provincial Key Laboratory of Wood Adhesives and Wood Products, Southwest Forestry University, Kunming, China
The International Joint Research Center for Biomass Materials, Southwest Forestry University, Kunming, China
School of Chemistry and Chemical Engineering, Kunming University, Kunming, China
Performance Formulation Solutions, Matthews, NC, USA
Funding
Open Fund of the International Joint Research Center for Biomass Materials, Southwest Forestry University · National Natural Science Foundation of China · 111 Project
References (57)
Show source-provided references
1. Keskes M · Journal of Thermoplastic Composite Materials · 2023 · 0 · 1
2. 10.1177/0892705721100191010.1177/08927057211001910 ↗
3. 10.1177/0892705721106339610.1177/08927057211063396 ↗
4. 10.1038/s41586-020-03167-710.1038/s41586-020-03167-7 ↗
5. 10.1002/adma.20200068210.1002/adma.202000682 ↗
6. 10.1016/j.carbpol.2018.03.04210.1016/j.carbpol.2018.03.042 ↗
7. 10.1016/j.carbpol.2020.11664210.1016/j.carbpol.2020.116642 ↗
8. Khoo RZ · Journal of Thermoplastic Composite Materials · 2022 · 0 · 1
9. 10.1016/j.scitotenv.2022.15690310.1016/j.scitotenv.2022.156903 ↗
10. 10.1016/j.carbpol.2017.09.02910.1016/j.carbpol.2017.09.029 ↗
11. 10.1016/j.compositesb.2021.10925010.1016/j.compositesb.2021.109250 ↗
12. 10.1016/j.biteb.2022.10118310.1016/j.biteb.2022.101183 ↗
13. Keskes M · Journal of Thermoplastic Composite Materials · 2022 · 0 · 1
14. 10.1016/j.carbpol.2018.09.02710.1016/j.carbpol.2018.09.027 ↗
15. 10.1016/j.ijbiomac.2022.07.12410.1016/j.ijbiomac.2022.07.124 ↗
16. 10.1016/j.ejpe.2020.12.00510.1016/j.ejpe.2020.12.005 ↗
17. 10.1016/j.biortech.2018.02.10410.1016/j.biortech.2018.02.104 ↗
18. 10.1038/s41598-018-21016-610.1038/s41598-018-21016-6 ↗
19. 10.1016/j.ijbiomac.2022.03.00710.1016/j.ijbiomac.2022.03.007 ↗
20. 10.1016/j.biortech.2019.12184210.1016/j.biortech.2019.121842 ↗
21. 10.1016/j.indcrop.2013.03.00610.1016/j.indcrop.2013.03.006 ↗
22. 10.1016/j.indcrop.2011.10.02310.1016/j.indcrop.2011.10.023 ↗
23. 10.1016/j.indcrop.2022.11533610.1016/j.indcrop.2022.115336 ↗
24. 10.1016/j.indcrop.2011.04.01610.1016/j.indcrop.2011.04.016 ↗
25. 10.1016/j.foreco.2020.11835710.1016/j.foreco.2020.118357 ↗
26. 10.1002/elsc.20180015810.1002/elsc.201800158 ↗
27. 10.1016/j.biombioe.2022.10636210.1016/j.biombioe.2022.106362 ↗
28. 10.1016/j.vibspec.2005.08.00410.1016/j.vibspec.2005.08.004 ↗
29. 10.1016/j.carbpol.2010.05.05210.1016/j.carbpol.2010.05.052 ↗
30. 10.3390/ma1416455710.3390/ma14164557 ↗
31. 10.1016/j.ijbiomac.2020.10.25710.1016/j.ijbiomac.2020.10.257 ↗
32. 10.3390/polym1401003210.3390/polym14010032 ↗
33. 10.1016/j.ijbiomac.2018.11.03510.1016/j.ijbiomac.2018.11.035 ↗
34. 10.1016/j.ijbiomac.2022.10.23410.1016/j.ijbiomac.2022.10.234 ↗
35. 10.1016/j.carbpol.2021.11790210.1016/j.carbpol.2021.117902 ↗
36. 10.1007/s12649-019-00799-310.1007/s12649-019-00799-3 ↗
37. 10.1007/s10570-022-04493-x10.1007/s10570-022-04493-x ↗
38. 10.1002/prep.20190031910.1002/prep.201900319 ↗
39. 10.1088/1757-899X/526/1/01201910.1088/1757-899X/526/1/012019 ↗
40. 10.1016/j.carbpol.2015.11.03810.1016/j.carbpol.2015.11.038 ↗
41. 10.3390/polym1419412710.3390/polym14194127 ↗
42. 10.1016/j.powtec.2014.04.03910.1016/j.powtec.2014.04.039 ↗
43. 10.1002/app.4840710.1002/app.48407 ↗
44. 10.1007/s10570-019-02876-110.1007/s10570-019-02876-1 ↗
45. 10.1016/j.enzmictec.2012.09.00210.1016/j.enzmictec.2012.09.002 ↗
46. 10.1016/j.carbpol.2022.11976410.1016/j.carbpol.2022.119764 ↗
47. 10.3390/molecules2808354110.3390/molecules28083541 ↗
48. 10.1177/004051752093239310.1177/0040517520932393 ↗
49. 10.1021/acs.chemrev.7b0062710.1021/acs.chemrev.7b00627 ↗
50. 10.1016/j.carbpol.2018.11.07510.1016/j.carbpol.2018.11.075 ↗
51. 10.1016/j.indcrop.2021.11431410.1016/j.indcrop.2021.114314 ↗
52. 10.1177/0892705721106339510.1177/08927057211063395 ↗
53. 10.1021/ie00042a00110.1021/ie00042a001 ↗
54. 10.3390/polym1416328610.3390/polym14163286 ↗
55. 10.1177/09673911170250080110.1177/096739111702500801 ↗
56. Sheydai A · Journal of Thermoplastic Composite Materials · 2022 · 0 · 1
57. 10.1016/j.ijbiomac.2022.02.07810.1016/j.ijbiomac.2022.02.078 ↗