Comparative study of thermosetting CF/epoxy and thermoplastic CF/PAEK composite laminates: Effects of stacking sequences on open-hole strength
Source abstract
Abstract
This study experimentally and numerically investigated the effect of stacking sequences on the open-hole compressive (OHC) and tensile (OHT) strength and failure mechanisms in carbon-fiber-reinforced thermoplastic (CFRTP) laminates. Specimens with stacking sequences containing a higher proportion of 0° layers and those with more ±45° layers were considered, denoted as “hard” and “soft” specimens, respectively. Strength prediction simulations for CFRTP were conducted using the three-dimensional extended finite element method, previously validated for carbon-fiber-reinforced thermosets (CFRTS). In the OHC test, kink-bands formed before matrix-dominated damage occurred for both hard and soft CFRTP specimens, while the opposite was found for CFRTS specimens due to the higher matrix toughness of CFRTP. Consequently, in soft CFRTP specimens, stress redistribution to the ±45° layers after kink-band formation led to gradual damage progression, achieving a strength comparable to CFRTS despite the higher 0°-layer compressive strength in CFRTS. The OHC simulation effectively predicted CFRTP failure using the maximum stress criterion. In the OHT test, CFRTP exhibited a higher strength than CFRTS in both hard and soft specimens due to the higher 0°-layer tensile strength in CFRTP. The OHT simulation accurately predicted abrupt failure in hard CFRTP specimens using the Weibull failure criterion but underestimated the strength of soft CFRTP specimens. This discrepancy arose because CFRTP exhibited less matrix-dominated damage, allowing stress redistribution to the ±45° layers after fiber breakage, leading to gradual damage progression. X-ray micro-computed-tomography observations confirmed that dispersed fiber breakages progressively connected through splitting cracks and propagated perpendicular to the fibers.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Mechanical Behavior of Composites · Epoxy Resin Curing Processes · Composite Structure Analysis and Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Tohoku University
University of Washington
National Institute for Materials Science
Funding
Japan Society for the Promotion of Science · New Energy and Industrial Technology Development Organization
References (83)
Show source-provided references
1. 10.1002/app.5054210.1002/app.50542 ↗
2. 10.1002/app.2327610.1002/app.23276 ↗
3. 10.1177/002199832090829910.1177/0021998320908299 ↗
4. 10.1177/002199831770570610.1177/0021998317705706 ↗
5. 10.1016/j.compositesb.2020.10805310.1016/j.compositesb.2020.108053 ↗
6. 10.1016/S0034-3617(09)70225-510.1016/S0034-3617(09)70225-5 ↗
7. 10.1177/002199831666232710.1177/0021998316662327 ↗
8. 10.1016/j.jmatprotec.2009.03.00810.1016/j.jmatprotec.2009.03.008 ↗
9. Malcolm W, Todd E. Carbon fiber reinforced PPS thermoplastic materials implemented in cost sensitive commercial applications. In: Proceedings of the 38th International SAMPE Symposium. Anaheim, CA, USA: SAMPE, 2023, pp. 2055–2065.
10. 10.2514/3.1161310.2514/3.11613 ↗
11. 10.1016/j.compstruct.2012.04.00210.1016/j.compstruct.2012.04.002 ↗
12. 10.1016/S0045-7825(02)00559-510.1016/S0045-7825(02)00559-5 ↗
13. Hashimoto K Yashiro S Onodera S et al. Asymmetric stacking patch for debonding suppression in single-sided patch repair of composite structures. Compos Struct; Under review.
14. 10.1016/j.compstruct.2018.05.00610.1016/j.compstruct.2018.05.006 ↗
15. 10.1016/j.compositesa.2006.07.00810.1016/j.compositesa.2006.07.008 ↗
16. 10.1016/j.compositesa.2008.12.01310.1016/j.compositesa.2008.12.013 ↗
17. 10.1016/j.compositesa.2009.02.02110.1016/j.compositesa.2009.02.021 ↗
18. 10.1016/j.compstruct.2012.10.00410.1016/j.compstruct.2012.10.004 ↗
19. 10.1080/09243046.2019.169658410.1080/09243046.2019.1696584 ↗
20. 10.1016/j.compscitech.2013.02.00110.1016/j.compscitech.2013.02.001 ↗
21. 10.1016/j.compstruct.2016.02.05010.1016/j.compstruct.2016.02.050 ↗
22. 10.1016/j.compscitech.2007.09.00310.1016/j.compscitech.2007.09.003 ↗
23. 10.1016/j.compositesb.2020.10822710.1016/j.compositesb.2020.108227 ↗
24. 10.1016/j.compscitech.2021.10908110.1016/j.compscitech.2021.109081 ↗
25. Rouchon J. Certification of large airplane composite structures. ICAS Congress Proceedings; 2: 1439–1447.
26. SAE International. Composite materials handbook. MIL-HDBK-17-1F, volume 1, chapter polymer matrix composites guidelines forcharacterization of structural materials, 2002.
27. 10.1016/j.compscitech.2023.10999610.1016/j.compscitech.2023.109996 ↗
28. 10.1016/j.compstruct.2021.11492610.1016/j.compstruct.2021.114926 ↗
29. 10.1016/j.tws.2024.11173010.1016/j.tws.2024.111730 ↗
30. 10.1177/00219983910250050510.1177/002199839102500505 ↗
31. 10.1016/j.compscitech.2019.03.02210.1016/j.compscitech.2019.03.022 ↗
32. 10.1016/j.compositesa.2012.12.00110.1016/j.compositesa.2012.12.001 ↗
33. 10.1016/j.jmps.2024.10590210.1016/j.jmps.2024.105902 ↗
34. 10.1177/0021998322109688010.1177/00219983221096880 ↗
35. 10.1016/j.compositesa.2016.12.02610.1016/j.compositesa.2016.12.026 ↗
36. 10.1016/j.compositesa.2021.10630010.1016/j.compositesa.2021.106300 ↗
37. 10.1177/0892705722111079110.1177/08927057221110791 ↗
38. 10.1016/j.compscitech.2023.11011610.1016/j.compscitech.2023.110116 ↗
39. 10.1016/j.ijsolstr.2024.11313010.1016/j.ijsolstr.2024.113130 ↗
40. 10.1080/09243046.2024.241446710.1080/09243046.2024.2414467 ↗
41. 10.1016/j.compositesa.2021.10636510.1016/j.compositesa.2021.106365 ↗
42. 10.1016/0020-7683(90)90017-P10.1016/0020-7683(90)90017-P ↗
43. 10.1177/00219983890230050410.1177/002199838902300504 ↗
44. 10.1177/089270570934709410.1177/0892705709347094 ↗
45. 10.1007/BF0110569010.1007/BF01105690 ↗
46. 10.1177/0892705723122282010.1177/08927057231222820 ↗
47. 10.1177/0021998324124062210.1177/00219983241240622 ↗
48. 10.3390/polym1522446810.3390/polym15224468 ↗
49. 10.1016/j.compositesa.2014.10.00310.1016/j.compositesa.2014.10.003 ↗
50. 10.1177/0021998323116894310.1177/00219983231168943 ↗
51. 10.1007/s10853-019-04090-710.1007/s10853-019-04090-7 ↗
52. 10.1016/j.compstruct.2023.11780410.1016/j.compstruct.2023.117804 ↗
53. Lian E. Medium toughness PAEK thermoplastics: Toray (Formerly TenCate) Cetex TC1225 (LM PAEK) T700GC 12K T1E unidirectional Tape 145 gsm 34% RC Qualification material property data report. Wichita State University, 2021. Technical report. https://www.wichita.edu/industry_and_defense/NIAR/Documents/TorayTC1225UnitapeCAM-RP-2019-036RevA5.10.2021MPDRFinal.pdf (accessed 19 February 2025).
54. JEC Composites. NCAMP announces release of first thermoplastic material, 2020. https://www.jeccomposites.com/news/spotted-by-jec/ncamp-announces-release-of-first-thermoplastic-material/ (accessed 19 February 2025).
55. 10.1016/j.compositesa.2025.10896310.1016/j.compositesa.2025.108963 ↗
56. Toray Advanced Composites. Toray Cetex® TC1225 LMPAEK product data sheet. Technical report, 2023. https://www.toraytac.com/media/3bd72fac-0406-48e4-bfc4-2ffd2398ac0c/fxj5OQ/TAC/Documents/Data_sheets/Thermoplastic/UD_tapes,_prepregs_and_laminates/Toray-Cetex-TC1225_PAEK_PDS.pdf (accessed 19 February 2025).
57. Toray Advanced Composites. 2510 Prepreg SystemData Sheet. Technical report, 2020. https://www.toraycma.com/wp-content/uploads/2510-Prepreg-System.pdf (accessed 19 February 2025).
58. ASTM D5766. Standard test method for open-hole tensile strength of polymer matrix composite laminates, 2011.
59. ASTM D6484. Standard test method for open-hole compressive strength of polymer matrix composite laminates, 2009.
60. 10.1016/j.compositesa.2005.12.02510.1016/j.compositesa.2005.12.025 ↗
61. 10.1016/j.compscitech.2006.03.02410.1016/j.compscitech.2006.03.024 ↗
62. 10.1016/S0266-3538(97)00183-810.1016/S0266-3538(97)00183-8 ↗
63. 10.1016/j.compositesa.2007.11.00510.1016/j.compositesa.2007.11.005 ↗
64. Camanho PP Dávila CG. Mixed-mode decohesion finite elements for the simulation of delamination in composite materials. Technical report 2002.10.2514/6.2001-1486 ↗
65. 10.1016/j.compstruc.2015.10.00510.1016/j.compstruc.2015.10.005 ↗
66. 10.1016/j.compositesa.2013.11.01210.1016/j.compositesa.2013.11.012 ↗
67. 10.1016/B978-0-12-341801-2.50007-210.1016/B978-0-12-341801-2.50007-2 ↗
68. 10.1177/002199830504645210.1177/0021998305046452 ↗
69. 10.1016/j.mechmat.2007.03.00510.1016/j.mechmat.2007.03.005 ↗
70. Christensen RM. Mechanics of composite materials. New York: John wiley & sons, 1979. https://doi.org/10.1002/pol.1980.130181009.
71. 10.1016/j.compositesa.2005.06.00810.1016/j.compositesa.2005.06.008 ↗
72. 10.1016/j.compositesa.2012.04.00910.1016/j.compositesa.2012.04.009 ↗
73. 10.1002/pc.75010060310.1002/pc.750100603 ↗
74. 10.1016/j.ijsolstr.2014.03.03810.1016/j.ijsolstr.2014.03.038 ↗
75. 10.3390/ma1522812310.3390/ma15228123 ↗
76. 10.1038/2201024a010.1038/2201024a0 ↗
77. 10.1177/00219983770110040810.1177/002199837701100408 ↗
78. 10.1177/00219983870210040210.1177/002199838702100402 ↗
79. 10.1016/j.engfracmech.2019.10659510.1016/j.engfracmech.2019.106595 ↗
80. 10.1177/00219983850190030510.1177/002199838501900305 ↗
81. 10.1007/BF0035643710.1007/BF00356437 ↗
82. 10.1016/j.compscitech.2011.06.00410.1016/j.compscitech.2011.06.004 ↗
83. 10.1016/j.compscitech.2017.06.00610.1016/j.compscitech.2017.06.006 ↗