journal article·2012-02

Comparative Studies of Mechanical and Interfacial Properties between Jute and Bamboo Fiber-Reinforced Polypropylene-Based Composites

S. Nahar, R.A. Khan, K. Dey, B. Sarker, A.K. Das, S. Ghoshal

Publisher page

Abstract

Jute and bamboo fiber-reinforced polypropylene (PP) based composites (50 wt% fiber) were fabricated by compression molding. Tensile strength (TS), bending strength (BS), tensile modulus (TM), and bending modulus (BM) of the jute-reinforced PP composite were found to be 48, 56, 900, and 1500 MPa, respectively. Then, bamboo fiber-reinforced PP-based composites (50 wt% fiber) were fabricated and the mechanical properties evaluated. The TS, BS, TM, and BM of bamboo-reinforced PP composites were found to be 60, 76, 4210, and 6210 MPa, respectively. It was revealed that bamboo fiber-based composites had higher TS, BS, TM, and BM compared to jute-based composites. Degradation tests of the composites (jute fiber/PP and bamboo fiber/PP) were performed in soil at ambient conditions for up to 24 weeks. It was revealed that bamboo fiber/PP composite retained its original mechanical properties higher than that of jute fiber/PP composite. The interfacial shear strength of the jute and bamboo fiber-based composites was investigated using the single-fiber fragmentation test and it was found to be 2.14 and 4.91 MPa, respectively. Fracture sides of the composites were studied by scanning electron microscope, and the results revealed poor fiber matrix adhesion for jute fiber-based composites compared to that of the bamboo fiber-based composites.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Bamboo properties and applications · Structural Behavior of Reinforced Concrete

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Nuclear and Radiation Chemistry Division, Institute of Nuclear Science and Technology, Bangladesh Atomic Energy Commission, Dhaka 1000, Bangladesh

Department of Chemistry, Bangladesh College of Leather Engineering and Technology, Dhaka, Bangladesh

Department of Applied Chemistry & Chemical Engineering, Faculty of Engineering and Technology, University of Dhaka, Dhaka 1000, Bangladesh

Department of Technical Physics II, Faculty of Mathematics and Natural Science, Ilmenau University of Technology, Ilmenau, Germany

References (29)

Show source-provided references
1. 10.1002/(SICI)1098-2329(199924)18:4<351::AID-ADV6>3.0.CO;2-X10.1002/(SICI)1098-2329(199924)18:4<351::AID-ADV6>3.0.CO;2-X ↗
2. 10.1177/073168440910314810.1177/0731684409103148 ↗
3. 10.1002/(SICI)1097-4628(19991024)74:4<900::AID-APP16>3.0.CO;2-J10.1002/(SICI)1097-4628(19991024)74:4<900::AID-APP16>3.0.CO;2-J ↗
4. 10.1016/j.radphyschem.2009.06.01110.1016/j.radphyschem.2009.06.011 ↗
5. Khan M.A. · Journal of Applied Polymer Science · 1999 · 77 · 841
6. 10.1002/(SICI)1097-4628(19981031)70:5<843::AID-APP2>3.0.CO;2-T10.1002/(SICI)1097-4628(19981031)70:5<843::AID-APP2>3.0.CO;2-T ↗
7. 10.1002/(SICI)1098-2329(199923)18:3<267::AID-ADV6>3.0.CO;2-L10.1002/(SICI)1098-2329(199923)18:3<267::AID-ADV6>3.0.CO;2-L ↗
8. 10.1016/S1359-835X(04)00178-210.1016/S1359-835X(04)00178-2 ↗
9. 10.1016/S0266-3538(00)00012-910.1016/S0266-3538(00)00012-9 ↗
10. 10.1016/S0266-3538(02)00225-710.1016/S0266-3538(02)00225-7 ↗
11. 10.1002/(SICI)1097-4628(20000404)76:1<83::AID-APP11>3.0.CO;2-L10.1002/(SICI)1097-4628(20000404)76:1<83::AID-APP11>3.0.CO;2-L ↗
12. 10.1002/(SICI)1097-4628(19980906)69:10<1891::AID-APP1>3.0.CO;2-910.1002/(SICI)1097-4628(19980906)69:10<1891::AID-APP1>3.0.CO;2-9 ↗
13. 10.1177/073168440810069910.1177/0731684408100699 ↗
14. Khan R.A. · Journal of Polymer Plastics Technology and Engineering · 2010 · 49 · 40710.1080/03602550903532174 ↗
15. 10.1002/(SICI)1097-4628(19980711)69:2<329::AID-APP14>3.0.CO;2-R10.1002/(SICI)1097-4628(19980711)69:2<329::AID-APP14>3.0.CO;2-R ↗
16. 10.1016/S0142-9418(03)00039-410.1016/S0142-9418(03)00039-4 ↗
17. 10.1016/S0266-3538(03)00084-810.1016/S0266-3538(03)00084-8 ↗
18. 10.1016/S0143-7496(99)00068-810.1016/S0143-7496(99)00068-8 ↗
19. 10.1016/0022-5096(65)90035-910.1016/0022-5096(65)90035-9 ↗
20. 10.1080/0021846830807491110.1080/00218468308074911 ↗
21. 10.1007/BF0111603110.1007/BF01116031 ↗
22. 10.1016/S1359-835X(01)00018-510.1016/S1359-835X(01)00018-5 ↗
23. 10.1002/(SICI)1097-4636(19970915)36:4<469::AID-JBM4>3.0.CO;2-C10.1002/(SICI)1097-4636(19970915)36:4<469::AID-JBM4>3.0.CO;2-C ↗
24. 10.1002/app.1359310.1002/app.13593 ↗
25. 10.1016/S1359-8368(96)00020-010.1016/S1359-8368(96)00020-0 ↗
26. 10.1016/0015-0568(81)90023-310.1016/0015-0568(81)90023-3 ↗
27. 10.1002/app.2905010.1002/app.29050 ↗
28. 10.1080/0360255090282435810.1080/03602550902824358 ↗
29. 10.1163/15685610332134084010.1163/156856103321340840 ↗