Ultrasonic consolidation of thermoplastic composite prepreg for automated fiber placement
Source abstract
Abstract
To address the industrial need for manufacturing advanced thermoplastic composite parts with less energy, waste, and time and at lower cost, the feasibility of automated fiber placement using ultrasonic consolidation (UC) is investigated as an alternative to hot gas torch, laser, and infrared (IR) heating. The flexural stiffness and strength of simple flat parts made using UC and also thermal pressing per manufacturer’s specifications are measured by three-point bending and compared. Whereas UC proved to be more effective in welding polyethylene terephthalate/carbon prepreg tape than thermal pressing for both unidirectional and quasi-isotropic layups, the opposite was true for high-density polyethylene/glass, although optimal welding process parameters may not have been used. Finally, a simple transient conduction model is used to predict temperature rise in the thickening laminate and is compared to experimental measurements.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Fiber Optic Sensors · Ultrasonics and Acoustic Wave Propagation · Mechanical Behavior of Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Center for Automation Technologies and Systems, Rensselaer Polytechnic Institute, Troy, NY, USA
References (35)
Show source-provided references
1. Grimshaw M · 2484
2. Favaloro M
3. Strong AB · 2008
4. Growth Opportunities in Global Composites Industry 2013–2018. Report, Irving: Lucintel, 2013.
5. Murphy J. The Reinforced Plastics Handbook. Oxford: Elsevier, 1998, p. 24.
6. Masi B. Fabrication methods and costs for thermoset and thermoplastic composite processing for aerospace applications. MS Thesis, Massachusetts Institute of Technology, 1988.
7. Drobny JG · 2007
8. Phillips WM · 1945
9. 10.1177/089270570404518710.1177/0892705704045187 ↗
10. Hauber H · 1990
11. 10.1177/089270570808948010.1177/0892705708089480 ↗
12. 10.1177/08927057910040010210.1177/089270579100400102 ↗
13. 10.1115/1.291056210.1115/1.2910562 ↗
14. 10.1177/08927057930060020410.1177/089270579300600204 ↗
15. Ghasemi Nejhad MN · Int J Mater Prod Technol · 1994 · 9 · 183
16. 10.1177/08927057970100060110.1177/089270579701000601 ↗
17. 10.1177/08927057980110060310.1177/089270579801100603 ↗
18. 10.1106/1RQV-317Q-36K0-1E6P10.1106/1RQV-317Q-36K0-1E6P ↗
19. 10.5028/jatm.2012.04030391210.5028/jatm.2012.040303912 ↗
20. Allaer K
21. 10.1177/08927057880010010910.1177/089270578800100109 ↗
22. Binetruy C · Proc. SPIE Vol. 8065: Article ID80650U-7, SPIE Eco-Photonics Engineering Workforce Education for a Green Future
23. Klein R · 2012
24. Automated Dynamics Corporation. Laser processing of thermoplastic composites. Available at: http://www.automateddynamics.com/content/laser_processing_thermoplastic_composites (accessed 15 November 2013).
25. Leemon V · 2002
26. Woods JA · 2003
27. Roylance M · 2003
28. Player J · 757
29. 10.1002/adv.2017810.1002/adv.20178 ↗
30. Lee EW · 2012
31. Inston D · 2004
32. Branson Ultrasonics Corporation · 2008
33. Ten Cate. TenCate Cetex TC930 Technical Data. Available at: www.tencate.com/emea/Images/CETEX-TC930_DS_041713_Web28-24791.pdf (accessed 21 November 2013).
34. Ten Cate. TenCate Cetex TC940 Technical Data. Available at: www.tencate.com/emea/Images/CETEX-TC940_DS_041713_Web28-24792.pdf (accessed 21 November 2013).
35. Mills AF · 1999