Effect of –COOH Functionalized Carbon Nanotubes on Mechanical, Dynamic Mechanical and Thermal Properties of Polypropylene Nanocomposites
Source abstract
Abstract
Multi-walled carbon nanotubes (CNTs) were functionalized on treatment with nitric acid and the surface-modified CNT was characterized using Fourier transform infrared spectroscopy (FTIR). Isotactic polypropylene (iPP)/CNT composites at different CNT loadings (i.e., 0.1, 0.25, 1.00, and 5.00 wt%) were prepared by melt blending in a mini blender. The differential scanning calorimetric (DSC) studies showed the nucleating effect of CNTs on the crystallization behavior of iPP. Results of X-ray diffraction studies are in conformity with the results of DSC studies. Results of stress–strain measurements reveal that Young's modulus increases, while elongation at break decreases with increase in CNT loading and the ductility of the composites is adversely affected at high loading of CNTs (>1.0 wt%). Functionalization of CNTs causes an improvement in Young's modulus, at all loadings studied, but elongation at break increases only up to 0.25%. At higher loading, the elongation at break drops down. Storage modulus increases with increase in CNT loading and the effect is greater in the case of functionalized CNTs. Tan δ shows a decrease with increase in CNT loading, but the effect is less pronounced at high CNT loading (>0.1 wt%).
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Carbon Nanotubes in Composites · Polymer Nanocomposites and Properties · Polymer crystallization and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Chemical Engineering, King Fahd University of Petroleum and Minerals, 31261 Dhahran, Kingdom of Saudi Arabia
Center of Research Excellence in Nanotechnology, King Fahd University of Petroleum and Minerals, 31261 Dhahran, Kingdom of Saudi Arabia
Department of Mechanical Engineering, King Fahd University of Petroleum and Minerals, 31261 Dhahran, Kingdom of Saudi Arabia
School of Materials Science and Engineering, University of New South Wales, Sydney 2052, Australia
References (33)
Show source-provided references
1. 10.1016/j.physe.2008.02.00110.1016/j.physe.2008.02.001 ↗
2. 10.1016/j.polymdegradstab.2008.01.03310.1016/j.polymdegradstab.2008.01.033 ↗
3. 10.1016/j.actamat.2008.01.01010.1016/j.actamat.2008.01.010 ↗
4. 10.1063/1.12650010.1063/1.126500 ↗
5. 10.1063/1.12212510.1063/1.122125 ↗
6. 10.1016/S1359-8368(03)00051-910.1016/S1359-8368(03)00051-9 ↗
7. 10.1016/j.msea.2007.01.10710.1016/j.msea.2007.01.107 ↗
8. 10.1016/j.polymer.2005.08.09210.1016/j.polymer.2005.08.092 ↗
9. 10.1016/j.polymer.2004.10.04810.1016/j.polymer.2004.10.048 ↗
10. 10.1021/cm060513q10.1021/cm060513q ↗
11. 10.1021/jp065399d10.1021/jp065399d ↗
12. 10.1002/polb.2112810.1002/polb.21128 ↗
13. 10.1002/adfm.20050014210.1002/adfm.200500142 ↗
14. 10.1016/j.carbon.2005.01.03110.1016/j.carbon.2005.01.031 ↗
15. 10.1002/app.2585210.1002/app.25852 ↗
16. 10.1063/1.163652110.1063/1.1636521 ↗
17. 10.1016/S0032-3861(03)00073-910.1016/S0032-3861(03)00073-9 ↗
18. 10.1016/S0266-3538(03)00036-810.1016/S0266-3538(03)00036-8 ↗
19. 10.1002/app.2043510.1002/app.20435 ↗
20. 10.1002/app.2070310.1002/app.20703 ↗
21. 10.1016/j.compscitech.2006.01.03410.1016/j.compscitech.2006.01.034 ↗
22. 10.1016/j.eurpolymj.2007.05.01010.1016/j.eurpolymj.2007.05.010 ↗
23. 10.1016/j.msea.2007.08.05010.1016/j.msea.2007.08.050 ↗
24. 10.1002/app.2547510.1002/app.25475 ↗
25. Tabuani D. · e-Polymers, Paper no · 2007 · 103 · 1
26. 10.1179/174328407X21327910.1179/174328407X213279 ↗
27. 10.3390/ma304288410.3390/ma3042884 ↗
28. 10.1016/j.compscitech.2009.10.02310.1016/j.compscitech.2009.10.023 ↗
29. Ritter U. · Polymer Composites · 2010 · 31 · 17910.1002/pc.20799 ↗
30. Socrates G. · 1980
31. 10.1016/j.polymer.2007.11.04110.1016/j.polymer.2007.11.041 ↗
32. Mark J.E. · 1996
33. 10.1002/star.1983035120210.1002/star.19830351202 ↗