journal article·2011-05

Effects of Mica and Fly Ash Concentration on the Properties of Polyester Thermoplastic Elastomer Composites

M.S. Sreekanth, S. Joseph, S.T. Mhaske, P.A. Mahanwar, V.A. Bambole

Publisher page

Abstract

Particle-filled polymer composites are becoming attractive because of their wide applications and low cost. In this study, the effects of fillers such as mica and fly ash, at varying concentrations, on the mechanical, thermal, electrical, rheological, and morphological properties of polyester thermoplastic elastomer (Hytrel ® ) were investigated. Composites of Hytrel ® with varying concentrations (5—40 wt%) of mica and fly ash were prepared by twin screw extrusion. Mechanical properties, such as flexural strength and modulus, were found to increase with filler concentration. Mica showed a moderate increase in tensile strength with low concentrations, whereas the strength decreased with fly ash concentration. Thermal and electrical properties of the composites were found to increase with filler concentration. Morphological studies revealed that there was a good dispersion of filler in the polymer matrix at lower concentrations.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Polymer Nanocomposites and Properties · Tribology and Wear Analysis · Natural Fiber Reinforced Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department Polymer Engineering and Technology, Institute of Chemical Technology, Matunga, Mumbai 400019, India

Department Polymer Engineering and Technology, Institute of Chemical Technology, Matunga, Mumbai 400019, India,

Department of Applied Physics, Institute of Chemical Technology, Matunga Mumbai 400019, India

References (24)

Show source-provided references
1. Katz, H.S. and Milevski, J.V. ( 1978). Handbook of Fillers and Reinforcements for Plastics , Vol. 1, 1st edn, pp. 333-457, Van Notrand Reinhold, New York.
2. 10.1002/app.1192710.1002/app.11927 ↗
3. Walker, B.M. (ed.) ( 1979 ). Polyester Thermoplastic Elastomer, In: Handbook of Thermoplastic Elastomer, 1st edn, Vol. 1, pp. 103-118, Litton Education Publishing, New York.
4. 10.1002/app.1977.07021022010.1002/app.1977.070210220 ↗
5. 10.1016/S0141-3910(96)00189-910.1016/S0141-3910(96)00189-9 ↗
6. Aso, O. · Sci. Technol. · 2007 · 67 · 2854
7. George, W. (ed.) (1999). Mica , In: Handbook of Fillers, 2nd edn, Vol. 1, pp. 112-115, Chem Tech Publishing , Toronto, New York.
8. 10.1016/S0141-3910(98)00215-810.1016/S0141-3910(98)00215-8 ↗
9. 10.1016/S0014-3057(01)00069-610.1016/S0014-3057(01)00069-6 ↗
10. Gan, D. · J. · 2001 · 37 · 1359
11. Song, C. · Lett. · 2001 · 48 · 299
12. 10.1002/(SICI)1097-4628(19991107)74:6<1361::AID-APP6>3.0.CO;2-U10.1002/(SICI)1097-4628(19991107)74:6<1361::AID-APP6>3.0.CO;2-U ↗
13. Xuang, X. · J. Miner. Mater. Charact. Eng. · 2003 · 2 · 11
14. 10.1016/j.jhazmat.2005.10.02810.1016/j.jhazmat.2005.10.028 ↗
15. Bose, S. · J. Miner. Mater. Charact. Eng. · 2004 · 3 · 23
16. 10.1002/pat.90010.1002/pat.900 ↗
17. 10.1002/app.2443910.1002/app.24439 ↗
18. 10.1016/S0921-3449(98)00041-X10.1016/S0921-3449(98)00041-X ↗
19. 10.1177/15280837930230010910.1177/152808379302300109 ↗
20. 10.1177/00952443830150030210.1177/009524438301500302 ↗
21. 10.1002/app.1993.07049040810.1002/app.1993.070490408 ↗
22. Bose, S. · J. Miner. Mater. Charact. Eng. · 2004 · 3 · 23
23. 10.1002/app.1354310.1002/app.13543 ↗
24. 10.1002/app.1994.07053030410.1002/app.1994.070530304 ↗