journal article·2021-11Open access

Rheological survey of carbon fiber-reinforced high-temperature thermoplastics for big area additive manufacturing tooling applications

Christine Ajinjeru, Vidya Kishore, Xun Chen, Christopher Hershey, John Lindahl, Vlastimil Kunc, Ahmed Arabi Hassen, Chad Duty

Abstract

Carbon fiber (CF)-reinforced thermoplastic composites have been widely used in different structural applications due to their superior thermal and mechanical properties. The big area additive manufacturing (BAAM) system, developed at Oak Ridge National Laboratory’s Manufacturing Demonstration Facility, has been used to manufacture several composite components, demonstration vehicles, molds, and dies. These components have been designed and fabricated using various CF-reinforced thermoplastics. In this study, the dynamic rheological and mechanical properties of a material commonly used in additive manufacturing, 20 wt% CF-acrylonitrile butadiene styrene (ABS), as well as three CF-reinforced high-temperature polymers, 25 wt% CF-polyphenylsulfone (PPSU), 35 wt% CF-polyethersulfone (PES), and 40 wt% CF-polyphenylene sulfide (PPS), used to print molds were investigated. The viscoelastic properties, namely storage modulus, loss modulus, tan delta, and complex viscosity, of these composites were studied, and the rheological behavior was related to the BAAM extrusion and bead formation process. The results showed 20 wt% CF-ABS and 40 wt% CF-PPS to display a more dominant elastic component at all frequencies tested while 25 wt% CF-PPSU and 35 wt% CF-PES have a more dominant viscous component. This viscoelastic behavior is then used to inform the deposition and bead formation process during extrusion on the BAAM system.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Innovations in Concrete and Construction Materials · Manufacturing Process and Optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Manufacturing Demonstration Facility, Oak Ridge National Laboratory, Knoxville, TN, USA

Bredesen Center for Interdisciplinary Research and Graduate Education, University of Tennessee, Knoxville, TN, USA

Department of Mechanical, Aerospace and Biomedical Engineering, University of Tennessee, Knoxville, TN, USA

School of Aeronautics and Astronautics, Purdue University, West Lafayette, IN, USA

References (52)

Show source-provided references
1. 10.1108/0144515031050119010.1108/01445150310501190 ↗
3. 10.1088/0957-4484/18/34/34520210.1088/0957-4484/18/34/345202 ↗
4. 10.1016/S0007-8506(07)62438-X10.1016/S0007-8506(07)62438-X ↗
5. 10.1108/RPJ-01-2013-001210.1108/RPJ-01-2013-0012 ↗
6. 10.1115/1.402872510.1115/1.4028725 ↗
7. Holshouser C · Adv Mater Process · 2013 · 171 · 15
8. 10.1557/jmr.2014.21210.1557/jmr.2014.212 ↗
10. Hassen AA
11. Kunc V · 1
12. 10.1108/RPJ-12-2015-018310.1108/RPJ-12-2015-0183 ↗
13. 10.1007/s11668-014-9803-910.1007/s11668-014-9803-9 ↗
14. 10.1016/j.compscitech.2014.10.00910.1016/j.compscitech.2014.10.009 ↗
15. 10.1002/app.1249610.1002/app.12496 ↗
16. Hassen AA · 1
17. 10.1016/j.addma.2018.03.00410.1016/j.addma.2018.03.004 ↗
18. Kishore V · 906
19. 10.1007/s00170-018-2510-z10.1007/s00170-018-2510-z ↗
20. Ajinjeru C · 754
21. Kishore V
22. Kishore V. Melt processability and post-processing treatment of high temperature semi-crystalline thermoplastics for extrusion deposition additive manufacturing. PhD Thesis, University of Tenneessee. https://trace.tennessee.edu/utk_graddiss/5231 (2018, accessed 25 April 2019).
23. 10.1016/j.jmapro.2018.08.00810.1016/j.jmapro.2018.08.008 ↗
24. Graessley WW · 2008
25. 10.1021/ma00095a00110.1021/ma00095a001 ↗
26. 10.3139/978344641281110.3139/9783446412811 ↗
27. 10.1017/CBO978051160531410.1017/CBO9780511605314 ↗
28. 10.1016/B978-1-4557-2598-4.00011-310.1016/B978-1-4557-2598-4.00011-3 ↗
29. 10.1007/BF0112817810.1007/BF01128178 ↗
30. 10.1122/1.55082510.1122/1.550825 ↗
31. 10.1007/978-94-015-9213-0_810.1007/978-94-015-9213-0_8 ↗
32. 10.1016/S0032-3861(03)00094-610.1016/S0032-3861(03)00094-6 ↗
33. ISO · 2015
34. 10.1002/app.2185510.1002/app.21855 ↗
35. 10.1002/app.1962.07006211510.1002/app.1962.070062115 ↗
36. Ajinjeru C · 485
37. 10.1002/9781118140611.ch110.1002/9781118140611.ch1 ↗
38. 10.1002/pol.1958.120281181210.1002/pol.1958.1202811812 ↗
39. 10.1002/pen.2028510.1002/pen.20285 ↗
40. 10.1016/j.compscitech.2018.03.00810.1016/j.compscitech.2018.03.008 ↗
41. 10.1002/adma.20140180410.1002/adma.201401804 ↗
42. 10.1073/pnas.171515711510.1073/pnas.1715157115 ↗
43. Hoskins D · Solid Free Fabr Symp · 2018 · 1102
44. 10.1016/j.matdes.2008.05.00510.1016/j.matdes.2008.05.005 ↗
45. 10.4028/www.scientific.net/MSF.654-656.247110.4028/www.scientific.net/MSF.654-656.2471 ↗
46. 10.1016/j.jmatprotec.2016.07.02510.1016/j.jmatprotec.2016.07.025 ↗
47. Talagani MR · SAMPE · 2015 · 51 · 27
48. 10.1016/j.addma.2019.03.00710.1016/j.addma.2019.03.007 ↗
49. 10.1016/j.addma.2015.02.00110.1016/j.addma.2015.02.001 ↗
50. 10.3844/ajeassp.2016.1.1110.3844/ajeassp.2016.1.11 ↗
51. 10.3844/ajeassp.2014.307.31510.3844/ajeassp.2014.307.315 ↗
52. 10.1007/s11665-016-2157-610.1007/s11665-016-2157-6 ↗