Processing, characterization, and wear analysis of short glass fiber-reinforced polypropylene composites filled with blast furnace slag
Source abstract
Abstract
Blast furnace slag (BFS) is a major solid waste in iron industries that results from the fusion of fluxing stone with coke and the siliceous and aluminous residues remaining after the reduction and separation of iron from the ore. Using this BFS in different proportions (0, 10, 20, and 30 wt%) in thermoplastic polypropylene matrix base, hybrid composites are prepared with and without 20 wt% short glass fiber reinforcement, by injection-molding route. The composites are characterized in regard to their physical and mechanical properties and their dry sliding wear characteristics are studied experimentally. For this, a standard pin on-disk test set-up and Taguchi’s orthogonal arrays are used. Taguchi’s experimental design method eliminates the need for repeated experiments and thus saves time, materials, and cost. It identifies the significant control factors predominantly influencing the wear rate. From the experimental findings, optimal combinations of control factors are obtained for minimum wear rate and on that basis, predictive correlations are proposed. The morphology of worn surfaces is then examined by scanning electron microscopy and possible wear mechanisms are discussed. Furthermore, a model based on artificial neural networks (ANN) for the prediction of sliding wear properties of these thermoplastic polymer composites is implemented. The ANN prediction profiles for the characteristic wear properties exhibit very good agreement with the measured results demonstrating that a well-trained network has been created. The simulated results explaining the effect of significant process variables on the wear rate indicate that the trained neural network possesses enough generalization capability of predicting wear rate even beyond the experimental range.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Tribology and Wear Analysis · Natural Fiber Reinforced Composites · Polymer Nanocomposites and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical Engineering, National Institute of Technology, Rourkela, India
Department of Mechanical Engineering, Indian Institute of Technology, Guwahati, India
References (28)
Show source-provided references
1. 10.1016/j.wear.2006.10.00410.1016/j.wear.2006.10.004 ↗
2. 10.1007/BF0225465910.1007/BF02254659 ↗
3. 10.1016/0043-1648(93)90062-Q10.1016/0043-1648(93)90062-Q ↗
4. 10.1016/S0142-9418(01)00145-310.1016/S0142-9418(01)00145-3 ↗
5. 10.1016/S0043-1648(01)00799-210.1016/S0043-1648(01)00799-2 ↗
6. 10.1016/S0261-3069(03)00018-910.1016/S0261-3069(03)00018-9 ↗
7. 10.1016/S0043-1648(00)00469-510.1016/S0043-1648(00)00469-5 ↗
8. 10.1023/A:101398880464210.1023/A:1013988804642 ↗
9. 10.1016/S0032-3861(97)10028-310.1016/S0032-3861(97)10028-3 ↗
10. 10.1007/978-94-011-0523-1_110.1007/978-94-011-0523-1_1 ↗
11. 10.1002/apmc.1986.05138010810.1002/apmc.1986.051380108 ↗
12. 10.1016/S0043-1648(03)00252-710.1016/S0043-1648(03)00252-7 ↗
13. Rothon RN · Adhesion · 1997 · 64 · 8710.1080/00218469708010533 ↗
14. 10.1007/3-540-69220-7_210.1007/3-540-69220-7_2 ↗
15. Naga SAR
16. Naga SAR · Proc 5th Conj Appl Mech Eng · 1992 · 157
17. 10.1016/j.wear.2009.11.00810.1016/j.wear.2009.11.008 ↗
18. Axen N · 2001 · 493
19. Barber AJ, Renner TE, You S, Predicting tire handling performance using neural network models. Soc Automot Eng 2004: 1–9.10.4271/2004-01-1574 ↗
20. 10.1080/1040200970898366010.1080/10402009708983660 ↗
21. 10.1016/S0043-1648(97)00260-310.1016/S0043-1648(97)00260-3 ↗
22. 10.1016/S0043-1648(96)07432-710.1016/S0043-1648(96)07432-7 ↗
23. 10.1016/0043-1648(96)06944-X10.1016/0043-1648(96)06944-X ↗
24. 10.1016/S0301-679X(97)00056-X10.1016/S0301-679X(97)00056-X ↗
25. 10.1016/0890-6955(95)00089-510.1016/0890-6955(95)00089-5 ↗
26. 10.1016/S0301-679X(00)00115-810.1016/S0301-679X(00)00115-8 ↗
27. 10.1177/135065011246186810.1177/1350650112461868 ↗
28. 10.1177/073168441244799210.1177/0731684412447992 ↗