journal article·2019-10

Thermomechanical investigations of SiC and Al 2 O 3 –reinforced HDPE

Narinder Singh, Rupinder Singh, IPS Ahuja

Publisher page

Abstract

This research work highlights the thermomechanical investigations of silicon carbide (SiC) and aluminum oxide (Al 2 O 3 )–reinforced high-density polyethylene (HDPE)–based feed stock filament of commercial fused deposition modeling (FDM) setup. The recycled HDPE waste was collected (from domestic waste) and washed with water jet for removal of contamination in the first stage. After contamination removal, rheological and thermal behavior (melt flow index, melting temperature, decomposition and enthalpy, etc.) of the unreinforced and reinforced polymer matrix was observed. The SiC and Al 2 O 3 reinforcements in the HDPE matrix have been controlled by twin-screw extrusion process, followed by its processing on single-screw extrusion for preparation of FDM feed stock filament. The feed stock filament prepared by single-screw extruder was subjected to tensile test for mechanical properties (such as peak strength, peak load, and Young’s modulus). After ascertaining mechanical properties, multifactor optimization has been performed. Finally, scanning electron micrographs were obtained to understand the distribution of ceramic particles. This study highlights the detailed procedure for managing the polymer waste with improved mechanical properties by considering multifactor optimization. This will enhance the sustainability and also helps to develop low-cost, in-house FDM filament for possible applications as rapid tooling.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · biodegradable polymer synthesis and properties · Natural Fiber Reinforced Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering, Punjabi University, Patiala, Punjab, India

Department of Production Engineering, Guru Nanak Dev Engineering College, Ludhiana, Punjab, India

Funding

Department of Science and Technology, Ministry of Science and Technology

References (20)

Show source-provided references
1. 10.1016/j.wasman.2009.06.00410.1016/j.wasman.2009.06.004 ↗
2. USEPA · Office of Solid Waste Management and Emergency Response
3. USEPA · Office of Solid Waste Management and Emergency Response
4. Dewil R · 27
5. Parfitt J · 2002
6. Clark JH, Hardy JJ. Towards sustainable chemical manufacturing: polylactic acid–a sustainable polymer . Sustainable development in practice: case studies for engineers and scientists. 1st ed. Hoboken: Wiley, 2004, pp. 250–282.10.1002/0470014202.ch7 ↗
7. Plastics Europe Market Research Group. Plastics – the Facts 2011: An analysis of European plastics production, demand and recovery for 2010, Plastic Europe Association of Plastic Manufacturers, Brussels, www.plasticeurope.org (2011)
8. 10.1016/j.compositesb.2016.09.01310.1016/j.compositesb.2016.09.013 ↗
9. 10.1016/j.compositesa.2011.02.00910.1016/j.compositesa.2011.02.009 ↗
10. 10.1016/j.compositesa.2009.06.00510.1016/j.compositesa.2009.06.005 ↗
11. 10.1016/j.compscitech.2010.01.02210.1016/j.compscitech.2010.01.022 ↗
12. 10.1002/app.2965010.1002/app.29650 ↗
13. 10.1016/j.polymertesting.2009.07.00110.1016/j.polymertesting.2009.07.001 ↗
14. 10.1016/j.compositesb.2017.03.04210.1016/j.compositesb.2017.03.042 ↗
15. 10.1002/pat.371010.1002/pat.3710 ↗
16. Qi Z, Lu L, Doan L, et al. Frequency effects on high-density polyethylene failure under cyclic loading (No. 2017-01-0332). SAE Technical Paper .10.4271/2017-01-0332 ↗
17. Salleh BS · Int J of Sustainable Constr Eng Technol · 2017 · 7 · 29
18. 10.1016/j.jclepro.2017.07.15710.1016/j.jclepro.2017.07.157 ↗
19. Matta JJ, Nguyen T, Bui HP. Cleaning composition. Patent 9,693,675-Medivators Inc. USA, 2017.
20. 10.1201/b2134710.1201/b21347 ↗