Development of a new hybrid yarn construction from recycled carbon fibres for high-performance composites. Part III: Influence of sizing on textile processing and composite properties
Source abstract
Abstract
The processing of recycled carbon fibres (rCFs) into hybrid yarn constructions is a promising recycling option, converting rCF into products with added value. Along with fibre length and strength, the sizing of rCF crucially affects their processing behaviour and subsequent composite properties. This article reports on the influence of sizing on the processing properties of rCF by mixing with polyamide (PA) 6 fibres to form a hybrid yarn construction. Moreover, resulting composite properties were studied as well. Thus, commercially available CF with thermoplastic and thermoset matrix compatible sizing in addition to pyrolyzed rCF without sizing was used for the investigations presented in this article. Results revealed that different sizing strongly influence the processing of rCF and PA 6 into hybrid yarn constructions. The opening and bending behaviour of rCF bundles with different sizing varied during the carding process so that various degrees of fibre shortening occurred. As expected, the sizing developed for thermoplastic matrix enabled the highest tensile and flexural strengths in thermoplastic composites. These findings greatly contribute to the understanding of rCF processing from different or unknown sources on industrial scale.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Fiber-reinforced polymer composites · biodegradable polymer synthesis and properties · Natural Fiber Reinforced Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Fakultät Maschinenwesen, Institut Für Textilmaschinen und Textile Hochleistungswerkstofftechnik, Technische Universität Dresden, Dresden, Germany
Leibniz-Institut für Polymerforschung Dresden e.V., Dresden, Germany
Funding
Bundesministerium für Bildung und Forschung
References (50)
Show source-provided references
1. 10.1016/S1359-835X(00)00124-X10.1016/S1359-835X(00)00124-X ↗
2. 10.1116/1.57922010.1116/1.579220 ↗
3. 10.1016/j.jcis.2006.08.05310.1016/j.jcis.2006.08.053 ↗
4. Park SJ · Proc Mat Sci: A · 2005 · 408 · 269
5. 10.1016/0266-3538(91)90072-W10.1016/0266-3538(91)90072-W ↗
6. 10.1016/j.eurpolymj.2004.10.03510.1016/j.eurpolymj.2004.10.035 ↗
7. 10.1016/0266-3538(91)90021-G10.1016/0266-3538(91)90021-G ↗
8. 10.1016/j.compscitech.2014.07.00510.1016/j.compscitech.2014.07.005 ↗
9. Hengstermann M · Carbon Composites Magazin · 2016 · 2 · 21
10. 10.1177/002199831244013310.1177/0021998312440133 ↗
11. 10.1016/j.pmatsci.2015.02.00310.1016/j.pmatsci.2015.02.003 ↗
12. 10.1016/0266-3538(96)00049-810.1016/0266-3538(96)00049-8 ↗
13. Poeppel A · Kunststoffe · 2018 · 5 · 77
14. Hehl J. Erforschung eines Verfahrens zur Konsolodierung von Carbonfasertapes aus recycelten Carbonfasern zur Herstellung von Faserverbundbauteilen. Final Report, German Institutes of Textile and Fiber Research Denkendorf, Germany, February 2018.
15. 10.5604/12303666.120784510.5604/12303666.1207845 ↗
16. 10.5604/12303666.121552810.5604/12303666.1215528 ↗
17. 10.1177/004051751561236310.1177/0040517515612363 ↗
18. 10.1177/004051751665851110.1177/0040517516658511 ↗
19. Hengstermann M
20. 10.1515/aut-2016-003410.1515/aut-2016-0034 ↗
21. Hengstermann M
22. Hengstermann M · Technische Textilien / Technical Textiles · 2015 · 58 · 37
23. Dauner M
24. Bonten C
25. Sigmund I
26. 10.1016/j.compositesa.2011.09.01410.1016/j.compositesa.2011.09.014 ↗
27. Wolf HJ. Zum Einfluss der Schneckenplastifizierung auf die Daserstruktur diskontinuierlich langglasfasergefüllter Kunststoffe. PhD Thesis, TU Darmstadt, Germany, 1996.
28. 10.3139/978156990630910.3139/9781569906309 ↗
29. 10.1002/pen.76021010510.1002/pen.760210105 ↗
30. SGL Group. Datasheet, SIGRAFIL® continuous carbon fiber tow, April 2018.
31. 10.3390/ma1204056510.3390/ma12040565 ↗
32. 10.3390/molecules2109112710.3390/molecules21091127 ↗
33. Wu S · 1982
34. 10.1016/j.carbon.2003.12.08510.1016/j.carbon.2003.12.085 ↗
35. 10.1016/j.cemconcomp.2017.08.00910.1016/j.cemconcomp.2017.08.009 ↗
36. 10.1177/09636935000090060110.1177/096369350000900601 ↗
37. 10.1016/j.ijadhadh.2015.10.02010.1016/j.ijadhadh.2015.10.020 ↗
38. 10.1177/00405175400100120310.1177/004051754001001203 ↗
39. 10.1016/S0266-3538(00)00239-610.1016/S0266-3538(00)00239-6 ↗
40. 10.1088/0508-3443/3/3/30210.1088/0508-3443/3/3/302 ↗
41. 10.1016/0022-5096(65)90035-910.1016/0022-5096(65)90035-9 ↗
42. 10.1016/1359-835X(95)00065-A10.1016/1359-835X(95)00065-A ↗
43. 10.1016/1359-835X(96)00066-810.1016/1359-835X(96)00066-8 ↗
44. 10.1016/S1359-835X(02)00179-310.1016/S1359-835X(02)00179-3 ↗
45. 10.1016/j.compositesa.2006.01.00710.1016/j.compositesa.2006.01.007 ↗
46. 10.1016/1359-835X(96)00046-210.1016/1359-835X(96)00046-2 ↗
47. Piggott MR. Load-bearing fibre composites. 1st ed. Oxford: Pergamon, 1980, pp. 203–209.10.1016/B978-0-08-024231-6.50006-4 ↗
48. 10.1002/pc.75006021110.1002/pc.750060211 ↗
49. 10.1016/S1359-835X(96)00127-310.1016/S1359-835X(96)00127-3 ↗
50. 10.1177/002199831244073710.1177/0021998312440737 ↗