journal article·2019-12Open access

Comparative manufacture and testing of induction- welded and adhesively bonded carbon fibre PEEK stiffened panels

M Flanagan, A Doyle, K Doyle, M Ward, M Bizeul, R Canavan, B Weafer, CM Ó Brádaigh, NM Harrison, J Goggins

Abstract

This work presents details of manufacturing and testing of a carbon fibre polyetheretherketone induction-welded hat-stiffened panel. Mechanical testing is carried out to evaluate the performance of the welded assembly and results are compared with similar testing of an adhesively bonded panel. The results show that the welded panel and the bonded panel had similar load-bearing capacity (<2% difference) and stiffness (<1% difference). Optical microscopy is used to verify the weld quality and identify manufacturing artefacts associated with induction welding. Inspection of the panel after welding shows that the induction welding process caused minor warpage, voids and delamination in the panel. The work addresses the lack of data relating to demonstrator scale welded assemblies in the literature, demonstrates that continuous induction welding is a suitable assembly technique for aerospace and automotive components under uniaxial in-plane compressive loading and identifies process-induced artefacts that may occur during induction welding.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Mechanical Behavior of Composites · Corrosion Behavior and Inhibition · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Civil Engineering, National University of Ireland Galway, Galway, Ireland

Engineering Department, ÉireComposites Teo, Indreabhán, County Galway, Ireland

Mechanical Engineering, University of Limerick, Limerick, Ireland

Institute for Materials and Processes, School of Engineering, University of Edinburgh, Scotland, UK

Mechanical Engineering, National University of Ireland Galway, Galway, Ireland

Advanced Manufacturing Research Centre (I-Form), Galway, Ireland

Irish Composites Research Centre (ICOMP), Galway, Ireland

Centre for Marine and Renewable Energy Ireland (MaREI), Galway, Ireland

Funding

Irish Research Council Employment Based Postgraduate Scheme

References (61)

Show source-provided references
1. 10.1016/j.compstruct.2016.06.03210.1016/j.compstruct.2016.06.032 ↗
2. 10.1016/S0143-7496(00)00006-310.1016/S0143-7496(00)00006-3 ↗
3. 10.1016/j.ijadhadh.2017.02.01910.1016/j.ijadhadh.2017.02.019 ↗
4. 10.1016/0263-8223(90)90039-H10.1016/0263-8223(90)90039-H ↗
5. Beaumont P · 2015
6. 10.1533/978184569925310.1533/9781845699253 ↗
7. Van Ingen JW
8. 10.1016/j.matdes.2017.02.02410.1016/j.matdes.2017.02.024 ↗
9. Doyle K · 691 · 95
10. O’Bradaigh CM
11. Funk JG, Sykes GFJr. The effects of simulated space environmental parameters on six commercially available composite materials. NASA Technical Paper 2906, 1989.
12. Dolan J
13. TAPAS (n.d.) Thermoplastic affordable primary aircraft structure, http://www.tapasproject.nl/en/ (accessed 8 May 2018).
14. 10.1016/j.compositesa.2017.06.01310.1016/j.compositesa.2017.06.013 ↗
15. 10.1177/09673911150230080110.1177/096739111502300801 ↗
16. Xiao XR · 2 · 225
17. 10.1016/S1359-835X(04)00182-410.1016/S1359-835X(04)00182-4 ↗
18. 10.1016/j.compositesa.2004.12.00610.1016/j.compositesa.2004.12.006 ↗
19. 10.1002/adv.2017810.1002/adv.20178 ↗
20. 10.1016/j.ast.2015.03.01310.1016/j.ast.2015.03.013 ↗
21. 10.1177/08927050302819210.1177/089270503028192 ↗
22. 10.1177/002199831561499110.1177/0021998315614991 ↗
23. 10.1016/S1359-835X(00)00094-410.1016/S1359-835X(00)00094-4 ↗
24. 10.1016/1359-835X(95)00048-710.1016/1359-835X(95)00048-7 ↗
25. 10.1016/S1359-835X(00)00166-410.1016/S1359-835X(00)00166-4 ↗
26. 10.1177/089270571245603110.1177/0892705712456031 ↗
27. Moser L · 52
28. CompositesWorld. Thermoplastic composites gain leading edge on the A380, 1st March 2006, http://www.compositesworld.com/articles/thermoplastic-composites-gain-leading-edge-on-the-a380 (accessed 12 April 2017).
29. 10.1016/j.repl.2015.08.06710.1016/j.repl.2015.08.067 ↗
30. 10.1002/pen.1012910.1002/pen.10129 ↗
31. 10.1016/j.compositesa.2005.12.02510.1016/j.compositesa.2005.12.025 ↗
32. 10.1016/j.compositesa.2007.07.01410.1016/j.compositesa.2007.07.014 ↗
33. 10.1177/089270570201500245110.1177/0892705702015002451 ↗
34. 10.1016/j.compositesa.2013.10.02410.1016/j.compositesa.2013.10.024 ↗
35. 10.1177/089270570404518710.1177/0892705704045187 ↗
36. 10.1016/j.compscitech.2005.11.00910.1016/j.compscitech.2005.11.009 ↗
37. 10.1016/j.compositesa.2005.10.00910.1016/j.compositesa.2005.10.009 ↗
38. Fink BK · 1999
39. 10.1016/j.ast.2005.01.00810.1016/j.ast.2005.01.008 ↗
40. Carvetto F
41. Pappadà S · 5481
42. Worrall CM, Wise RJ. Novel induction heating technique for joining of carbon fibre composites. In: ECCM16 – 16th European conference on composite materials (ed F Paris), Seville, Spain, 22–26 June 2014. Spain: ECCM.https://www.twi-global.com/technical-knowledge/published-papers/novel-induction-heating-technique-for-joining-of-carbon-fibre-composites/
43. 10.1177/002199830303700677610.1177/0021998303037006776 ↗
44. Kim HJ · J Compos Mater · 2012 · 11 · 37
45. 10.1177/002199830203600417110.1177/0021998302036004171 ↗
46. 10.1177/09673911120200040110.1177/096739111202000401 ↗
47. Moser L. Experimental analysis and modeling of susceptorless induction welding of high performance thermoplastic polymer composites. PhD Thesis, Technische Universität Kaiserslautern, Institut für Verbundwerkstoffe GmbH, Germany, 2012.
48. Schieler O, Beier U, Mitschang P. Control of the through-thickness temperature distribution in carbon composite aerospace parts during induction welding. J Thermop Compos Mater 2018; 31(12): 1587–1608.10.1177/0892705717738390 ↗
49. 10.1016/j.compstruct.2015.03.06810.1016/j.compstruct.2015.03.068 ↗
50. Suprem · 2011
51. TohoTenax. Product data sheet. Toho Tenax, TPCL PEEK-HTA40, 2015.
52. 3M. Aerospace technical data sheet, 3M Scotch Weld B/A, two part structural adhesive. 3M Scotch Weld 9323, 2010.
53. ECSS European Cooperation for Space Standardization · 2011
54. British Standards Institute. BS EN 1465 · 2009
55. American Society for Testing and Materials ASTM E4-16 · Ann Book ASTM Stand · 2001 · 3 · 11
56. 10.1038/nmeth.208910.1038/nmeth.2089 ↗
57. 10.1016/S1359-835X(00)00183-410.1016/S1359-835X(00)00183-4 ↗
58. 10.1016/j.compositesa.2015.08.03710.1016/j.compositesa.2015.08.037 ↗
59. 10.1177/00219983880220050210.1177/002199838802200502 ↗
60. 10.1016/S0266-3538(02)00144-610.1016/S0266-3538(02)00144-6 ↗
61. Schulte KJ · 1989