Insert injection molding of low-density polyethylene single-polymer composites reinforced with ultrahigh-molecular-weight polyethylene fabric
Source abstract
Abstract
Low-density polyethylene single-polymer composites (SPCs) reinforced with sandwiched ultrahigh-molecular-weight polyethylene woven fabric were prepared by insert injection molding. The process combines aesthetic and processing advantages. A processing temperature window (135–155°C) of a very short cycle time (less than 30 s) could be realized. The mechanical properties and morphologies of the samples were evaluated. The results suggested that the polyethylene SPCs were prepared successfully with concurrent increases in flexural strength (∼57%), tensile strength (∼164%), and impact strength (∼69%). The effects of different processing parameters including the nozzle temperature, injection pressure, injection speed, and the holding time were discussed. Numerical simulation results were used in the analysis.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Polymer crystallization and properties · Natural Fiber Reinforced Composites · Mechanical Behavior of Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Chemistry and Chemical Engineering, Beijing Institute of Technology, Beijing, People’s Republic of China
References (22)
Show source-provided references
1. 10.1007/BF0055492810.1007/BF00554928 ↗
2. 10.1007/BF0035780110.1007/BF00357801 ↗
3. 10.1007/BF0040089910.1007/BF00400899 ↗
4. 10.1023/A:101864740161910.1023/A:1018647401619 ↗
5. 10.1023/A:100483581673510.1023/A:1004835816735 ↗
6. 10.1016/S0266-3538(96)00149-210.1016/S0266-3538(96)00149-2 ↗
7. 10.1016/S1359-835X(98)00085-210.1016/S1359-835X(98)00085-2 ↗
8. 10.1016/S0032-3861(98)00309-710.1016/S0032-3861(98)00309-7 ↗
9. 10.1016/S0266-3538(98)00090-610.1016/S0266-3538(98)00090-6 ↗
10. 10.1016/S0266-3538(98)00126-210.1016/S0266-3538(98)00126-2 ↗
11. 10.1016/j.polymertesting.2008.03.00110.1016/j.polymertesting.2008.03.001 ↗
12. 10.1002/app.1993.07050031410.1002/app.1993.070500314 ↗
13. 10.1016/S0032-3861(02)00848-010.1016/S0032-3861(02)00848-0 ↗
14. 10.1016/j.compscitech.2007.11.00310.1016/j.compscitech.2007.11.003 ↗
15. 10.1016/j.polymer.2011.04.02610.1016/j.polymer.2011.04.026 ↗
16. 10.1016/j.progpolymsci.2010.07.00210.1016/j.progpolymsci.2010.07.002 ↗
17. 10.1016/j.compscitech.2012.09.01710.1016/j.compscitech.2012.09.017 ↗
18. 10.1002/app.3941110.1002/app.39411 ↗
19. 10.1016/j.compscitech.2014.11.00210.1016/j.compscitech.2014.11.002 ↗
20. 10.1016/j.compscitech.2015.05.01510.1016/j.compscitech.2015.05.015 ↗
21. Mao Q · Polym Eng Sci · 2015 · 52 · 2237
22. 10.1080/0022234080221602010.1080/00222340802216020 ↗