Elastic buckling of rectangular fiber-metal laminated plates under uniaxial compression
Source abstract
Abstract
In this article, the elastic buckling response of rectangular simply supported and clamped fiber-metal laminates (FMLs) subjected to uniaxial compressive loading is investigated using the finite element method and eigenvalue buckling analysis. Using validated finite element method (FEM) models, the buckling coefficient-aspect ratio diagrams and the mode shapes of nine GLARE grades are obtained and studied along with the diagrams and the mode shapes of three unidirectional glass-epoxy composites and monolithic 2024-T3 aluminum. It is found that the critical average buckling stress and the buckling load of the materials increases for increasing metal volume fraction, when the plate aspect ratio is greater than 1.5. The rule of mixtures is evaluated and found to be a simple method to estimate approximately the average critical buckling stress of the GLARE plates. An approximate formula is derived for the estimation of the critical buckling coefficient of the GLARE plates using the buckling coefficients of their constituents. The applicability of the results to thermoplastic-based FMLs is discussed.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Composite Structure Analysis and Optimization · Mechanical Behavior of Composites · Structural Load-Bearing Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanics, Laboratory of Strength of Materials, National Technical University of Athens, Athens, Greece
References (35)
Show source-provided references
1. 10.1023/A:101600631463010.1023/A:1016006314630 ↗
2. 10.1023/A:102559331478010.1023/A:1025593314780 ↗
3. 10.1023/A:102553370180610.1023/A:1025533701806 ↗
4. 10.1177/089270571140816510.1177/0892705711408165 ↗
5. 10.1016/S0894-9166(14)60018-510.1016/S0894-9166(14)60018-5 ↗
6. 10.1016/j.compstruct.2016.09.09710.1016/j.compstruct.2016.09.097 ↗
7. 10.1016/j.compstruct.2012.12.01610.1016/j.compstruct.2012.12.016 ↗
8. 10.1016/j.compstruct.2017.04.06310.1016/j.compstruct.2017.04.063 ↗
9. 10.1016/j.compstruct.2017.04.03010.1016/j.compstruct.2017.04.030 ↗
10. 10.1177/089270570201500573210.1177/0892705702015005732 ↗
11. 10.1177/08927057940070020410.1177/089270579400700204 ↗
12. 10.1016/j.compstruct.2012.03.00410.1016/j.compstruct.2012.03.004 ↗
13. 10.1177/073168441349843410.1177/0731684413498434 ↗
14. 10.1016/j.tws.2016.06.01810.1016/j.tws.2016.06.018 ↗
15. 10.1016/j.compositesa.2014.02.01110.1016/j.compositesa.2014.02.011 ↗
16. 10.1177/002199830808975010.1177/0021998308089750 ↗
17. 10.1177/002199830606529110.1177/0021998306065291 ↗
18. 10.1007/s13726-013-0210-y10.1007/s13726-013-0210-y ↗
19. 10.1007/s10853-007-2437-510.1007/s10853-007-2437-5 ↗
20. 10.1177/107754631769861910.1177/1077546317698619 ↗
21. 10.1016/S0263-8223(03)00036-910.1016/S0263-8223(03)00036-9 ↗
22. 10.12989/scs.2014.17.1.00110.12989/scs.2014.17.1.001 ↗
23. Ghaheri A · J Eng Mech · 2014 · 140
24. ANSYS · 2014
25. Jones RM · 1999
26. Whitney JM · 1987
27. Gay D · 2003
28. Hughes OF · 2010
29. Hughes OF · 1983
30. Timoshenko SP · 1961
31. Spyrakos CC, Raftoyiannis J. Linear and nonlinear finite element analysis in engineering practice. Athens: Algor Inc. 1997, p. 363.
32. 10.1177/00219983730070010810.1177/002199837300700108 ↗
33. 10.1016/j.polymertesting.2017.11.00810.1016/j.polymertesting.2017.11.008 ↗
34. 10.1177/00219983690030011110.1177/002199836900300111 ↗
35. Leissa AW. Buckling of laminated composite plates and shell panels. Ohio: Air Force Wright Aeronautical Laboratories, 1985, p. 126.