Thermo-mechanical properties of composite filaments for 3D printing of fabrics
Source abstract
Abstract
The objective of this study is to manufacture composite filaments to be used in three-dimensional (3D) printing of fabrics using fused deposition modeling (FDM) method. The primary properties of a fabric are flexibility and strength which are lacking in the available 3D printed materials. Polylactic acid (PLA), thermoplastic polyurethane (TPU) and poly(ethylene) glycol (PEG) were blended in different proportions and extruded using twin-screw extruder to obtain composite filaments. The properties of the filaments were studied using various material characterization methods such as uniaxial tensile test, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), dynamic mechanical analysis (DMA), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscope (SEM). With the addition of PEG in the PLA/TPU composition, it was found that the yield stress and Young’s modulus of the composite filaments have significantly decreased compared to that of pure PLA filament. It was also noted that there was no significant difference in ultimate tensile strength whereas the elongation at break was increased by more than 500%. Using the composite filament, a plain weave fabric structure was 3D printed to investigate the printing ability of a complex structure. It is concluded that the composite filaments developed are suitable for 3D printing but non-uniformity in diameter affects the print quality and hence the overall properties of fabrics.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · biodegradable polymer synthesis and properties · Microplastics and Plastic Pollution
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical Engineering, Auburn University, Auburn, AL, USA
Department of Industrial and Systems Engineering, Auburn University, Auburn, AL, USA
Interdisciplinary Center for Advanced Manufacturing Systems (ICAMS), Auburn University, Auburn, AL, USA
Funding
Auburn University · Interdisciplinary Center of Advanced Manufacturing Systems
References (57)
Show source-provided references
1. Hull CW · 1984
2. 10.1016/j.futures.2017.05.00110.1016/j.futures.2017.05.001 ↗
3. 10.1088/1757-899X/62/1/01201810.1088/1757-899X/62/1/012018 ↗
4. Partsch L, Vassiliadis S, Papageorgas P. 3D printed textile fabrics structures. In: 5th International Istanbul Textile Congress 2015: Innovative Technologies “Inspire to Innovate, Athens, Greece, September 2015, pp. 3–10.
5. Lussenburg K, Van Der Velden N, Doubrovski Z, et al. Designing with 3D printed textiles. In: International Conference on Additive Technologies, Delft, the Netherlands, October 2014, pp. 74–81.
6. 10.1080/17543266.2019.157326910.1080/17543266.2019.1573269 ↗
7. Nervous System. Kinematics bodice, https://n-e-r-v-o-u-s.com/projects/tags/3dprint/albums/kinematics-clothing/ (2014, accessed 03 November 2021).
8. 10.1177/155892502094821610.1177/1558925020948216 ↗
9. 10.1186/s40691-018-0162-010.1186/s40691-018-0162-0 ↗
10. 10.14502/Tekstilec2019.62.248-25710.14502/Tekstilec2019.62.248-257 ↗
11. 10.1016/B978-0-12-814062-8.00002-910.1016/B978-0-12-814062-8.00002-9 ↗
12. 10.1108/RPJ-05-2020-009510.1108/RPJ-05-2020-0095 ↗
13. 10.1007/s00170-021-06870-510.1007/s00170-021-06870-5 ↗
14. 10.1177/089270572096456010.1177/0892705720964560 ↗
15. 10.1177/1528083722111463810.1177/15280837221114638 ↗
16. 10.1177/1528083721106493710.1177/15280837211064937 ↗
17. 10.1016/j.matt.2021.10.01810.1016/j.matt.2021.10.018 ↗
18. 10.1177/0892705721106256110.1177/08927057211062561 ↗
19. 10.1177/089270571988601010.1177/0892705719886010 ↗
20. 10.1007/s11837-006-0234-210.1007/s11837-006-0234-2 ↗
21. 10.1016/j.carbpol.2007.05.04010.1016/j.carbpol.2007.05.040 ↗
22. 10.1007/s00170-016-9010-910.1007/s00170-016-9010-9 ↗
23. 10.1016/j.jmapro.2010.10.00210.1016/j.jmapro.2010.10.002 ↗
24. 10.1177/089270571984454610.1177/0892705719844546 ↗
25. 10.1177/089270571882325510.1177/0892705718823255 ↗
26. 10.1023/A:101018591030110.1023/A:1010185910301 ↗
27. 10.3390/app706057910.3390/app7060579 ↗
28. 10.1002/jbm.a.3200910.1002/jbm.a.32009 ↗
29. 10.1002/macp.1996.02197042710.1002/macp.1996.021970427 ↗
30. 10.3390/bioengineering501000210.3390/bioengineering5010002 ↗
31. 10.1016/j.polymdegradstab.2014.01.00210.1016/j.polymdegradstab.2014.01.002 ↗
32. 10.1002/app.4110410.1002/app.41104 ↗
33. 10.1016/j.msec.2013.07.03710.1016/j.msec.2013.07.037 ↗
34. 10.1016/j.polymer.2003.12.07710.1016/j.polymer.2003.12.077 ↗
35. 10.1016/j.polymertesting.2003.09.01310.1016/j.polymertesting.2003.09.013 ↗
36. 10.1002/pen.2463310.1002/pen.24633 ↗
37. 10.1088/1758-5082/4/3/03500510.1088/1758-5082/4/3/035005 ↗
38. 10.1016/S0142-9612(98)00025-810.1016/S0142-9612(98)00025-8 ↗
39. 10.1039/b413546f10.1039/b413546f ↗
40. 10.1007/978-1-4899-0703-510.1007/978-1-4899-0703-5 ↗
41. 10.1155/2015/39358210.1155/2015/393582 ↗
42. 10.1016/j.eurpolymj.2014.11.04110.1016/j.eurpolymj.2014.11.041 ↗
43. 10.1002/app.3286310.1002/app.32863 ↗
44. 10.1177/089270571667948010.1177/0892705716679480 ↗
45. 10.1177/089270571877286710.1177/0892705718772867 ↗
46. Purak Corbion. Luminy® LX175 product, 2016, https://cdn.shopify.com/s/files/1/0236/7897/files/TDS_Luminy_LX175_Filabot.pdf?v=1602610806.
47. L LifeSciences. Pellethane 2363-90ae TPU, 2016, https://www.techkits.com/products/resin-tpunat-90a/tpunat-90a.pdf.
48. 10.1016/0032-3861(89)90371-610.1016/0032-3861(89)90371-6 ↗
49. 10.1002/app.5041110.1002/app.50411 ↗
50. 10.1021/acsapm.0c0136310.1021/acsapm.0c01363 ↗
51. 10.1016/j.conbuildmat.2015.12.07510.1016/j.conbuildmat.2015.12.075 ↗
52. 10.3390/polym1203063210.3390/polym12030632 ↗
53. 10.1002/pi.614910.1002/pi.6149 ↗
54. 10.1016/j.eurpolymj.2021.11033810.1016/j.eurpolymj.2021.110338 ↗
55. 10.1080/03602559.2015.109868810.1080/03602559.2015.1098688 ↗
56. 10.1080/1023666X.2017.131275410.1080/1023666X.2017.1312754 ↗
57. 10.1002/app.4938710.1002/app.49387 ↗