Evaluation of slot milling processes on carbon fiber reinforced polyetheretherketone thermoplastic composite utilizing nanofluid-enhanced minimum quantity lubrication technique
Source abstract
Abstract
Sanctions aimed at reducing carbon emissions promote the adoption of sustainable materials, such as carbon fiber-reinforced polyetheretherketone (CF/PEEK) thermoplastic composites, in the aerospace sector due to their distinctive characteristics. The application of the secondary machining used in the production of functional components from CF/PEEK composite material in dry and wet cutting conditions causes performance and efficiency loss on the material and process. Therefore, in this study, the minimum quantity lubrication (MQL) and MQL using the multi-walled carbon nanotube-reinforced nanofluid (N-MQL) techniques were utilized for the first time in the milling of CF/PEEK, and the machining performance was evaluated in terms of cutting force, feed force, cutting temperature, surface roughness, surface topography, burr height, and dimensional error. In comparison to dry cutting, the N-MQL method achieved maximum improvements of 77.5%, 71.8%, 67.5%, 49.4%, 71.8%, 74.1%, and 90.4% in these machining outputs, respectively. Then, the optimum cutting parameters considering all machining responses were selected using TOPSIS, VIKOR, CoCoSo, and MOORA multi-criteria decision-making (MCDM) methods. MCDM results showed that to obtain optimum machining responses in CF/PEEK machining, the N-MQL cutting condition should be used as well as the low/average cutting speed and low feed values.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced machining processes and optimization · Injection Molding Process and Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Yildiz Technical University
Turkish Aerospace Industries Inc
.
Funding
Türk Havacılık ve Uzay Sanayii
References (51)
Show source-provided references
1. 10.1016/j.compositesb.2024.11124710.1016/j.compositesb.2024.111247 ↗
2. 10.1016/j.triboint.2024.10989310.1016/j.triboint.2024.109893 ↗
3. 10.1016/j.jmapro.2021.05.06610.1016/j.jmapro.2021.05.066 ↗
4. 10.1016/j.compositesb.2022.10975210.1016/j.compositesb.2022.109752 ↗
5. 10.1016/j.compositesb.2021.10903410.1016/j.compositesb.2021.109034 ↗
6. 10.1016/j.procir.2017.12.07710.1016/j.procir.2017.12.077 ↗
7. 10.1002/pc.2874810.1002/pc.28748 ↗
8. 10.3390/polym1313217510.3390/polym13132175 ↗
9. 10.1007/s00170-022-09430-710.1007/s00170-022-09430-7 ↗
10. 10.1016/j.jmapro.2022.02.04010.1016/j.jmapro.2022.02.040 ↗
11. 10.1007/s00170-021-08317-310.1007/s00170-021-08317-3 ↗
12. 10.1016/j.ijmecsci.2022.10761810.1016/j.ijmecsci.2022.107618 ↗
13. 10.1016/j.jmapro.2022.05.03310.1016/j.jmapro.2022.05.033 ↗
14. 10.1016/j.compscitech.2022.10956610.1016/j.compscitech.2022.109566 ↗
15. 10.1016/j.jcomc.2023.10038710.1016/j.jcomc.2023.100387 ↗
16. 10.1016/j.jmapro.2023.01.04210.1016/j.jmapro.2023.01.042 ↗
17. 10.1016/j.polymertesting.2023.10813210.1016/j.polymertesting.2023.108132 ↗
18. 10.1016/j.jmapro.2024.04.02610.1016/j.jmapro.2024.04.026 ↗
19. 10.1002/pc.2841510.1002/pc.28415 ↗
20. 10.1177/168781402096623210.1177/1687814020966232 ↗
21. 10.1016/j.compositesa.2022.10741810.1016/j.compositesa.2022.107418 ↗
22. 10.1016/j.compstruct.2024.11821210.1016/j.compstruct.2024.118212 ↗
23. 10.1007/s40430-023-04460-y10.1007/s40430-023-04460-y ↗
24. 10.1088/2053-1591/acfb5f10.1088/2053-1591/acfb5f ↗
25. 10.1016/j.jmapro.2022.07.06510.1016/j.jmapro.2022.07.065 ↗
26. 10.1016/j.jclepro.2024.14077110.1016/j.jclepro.2024.140771 ↗
27. 10.1016/j.susmat.2023.e0075610.1016/j.susmat.2023.e00756 ↗
28. 10.1016/j.susmat.2023.e0062810.1016/j.susmat.2023.e00628 ↗
29. 10.3390/su801003710.3390/su8010037 ↗
30. 10.1108/MD-05-2017-045810.1108/MD-05-2017-0458 ↗
31. Brauers WK, Zavadskas EK. The MOORA method and its application to privatization in a transition economy. Control Cybern 2006; 35: 445–469.
32. 10.1016/j.jmapro.2022.01.06910.1016/j.jmapro.2022.01.069 ↗
33. 10.1016/j.compositesa.2023.10782010.1016/j.compositesa.2023.107820 ↗
34. 10.1007/s42452-020-2416-x10.1007/s42452-020-2416-x ↗
35. 10.1002/pc.2566310.1002/pc.25663 ↗
36. 10.1016/j.icheatmasstransfer.2022.10605410.1016/j.icheatmasstransfer.2022.106054 ↗
37. 10.1016/j.jmapro.2021.11.04410.1016/j.jmapro.2021.11.044 ↗
38. 10.1016/j.enconman.2010.06.07210.1016/j.enconman.2010.06.072 ↗
39. 10.1016/j.triboint.2021.10689410.1016/j.triboint.2021.106894 ↗
40. 10.3390/s13091177210.3390/s130911772 ↗
41. 10.1080/10426914.2012.67791710.1080/10426914.2012.677917 ↗
42. 10.1016/j.triboint.2020.10632310.1016/j.triboint.2020.106323 ↗
43. 10.1016/j.matpr.2015.07.33110.1016/j.matpr.2015.07.331 ↗
44. 10.1007/s00170-021-08279-610.1007/s00170-021-08279-6 ↗
45. 10.1016/j.triboint.2023.10832010.1016/j.triboint.2023.108320 ↗
46. 10.1016/j.jmrt.2021.09.00710.1016/j.jmrt.2021.09.007 ↗
47. 10.1016/j.compositesb.2021.10915510.1016/j.compositesb.2021.109155 ↗
48. 10.1016/j.procir.2015.08.07410.1016/j.procir.2015.08.074 ↗
49. 10.1007/s00170-017-0023-910.1007/s00170-017-0023-9 ↗
50. 10.1016/j.triboint.2018.10.02510.1016/j.triboint.2018.10.025 ↗
51. 10.1016/j.tca.2006.11.03610.1016/j.tca.2006.11.036 ↗