Experimental investigation of tribological performance of 3D printed textured journal bearings for various polymers
Source abstract
Abstract
In this study, the 3D-printed textured journal bearings (TJBs) are developed by fused deposition modelling (FDM) process with three different polymers such as ABS, PLA and nylon. For the study, the process parameters such as texture depth (TD), rotor speed (S) and load (L) are considered as input parameters. The experimental analysis of 3D-printed TJB is performed based on the response surface methodology (RSM). With the RSM technique, the influence of these input parameters on the tribological performance of 3D-printed TJBs. The tribological performance of 3D-printed TJBs are wear resistance (WR) and wear temperature (WT). Further, the GRA analysis is performed to evaluate the optimum value of these process parameters for ABS, PLA and nylon polymer. These results demonstrate that the wear resistance (WR) of TJBs is first increases with the texture depth and then starts decreasing. Among all the polymers, the ABS polymer is the most significant, and nylon is the least significant polymer for the 3D-printed TJBs. The maximum WR (i.e. 76.576 m/mm 3 ) of 3D-printed TJBs is observed for the PLA polymer. Whereas, nylon provides the least WR (i.e. 9.572 m/mm 3 ) of 3D-printed TJBs. At the optimal value of process parameters (TD = 1.5 mm, S = 500 r/min and L = 10N), the WR and WT of 3D-printed TJBs (for ABS polymer) are 62.126 m/mm 3 and 323.75 K respectively.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Tribology and Wear Analysis · Orthopaedic implants and arthroplasty
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Mechanical Engineering Department, Rotor Dynamics and Diagnostics Lab., Motilal Nehru National Institute of Technology Allahabad, India
References (59)
Show source-provided references
1. 10.1016/j.promfg.2019.06.08910.1016/j.promfg.2019.06.089 ↗
2. 10.1155/2019/965693810.1155/2019/9656938 ↗
3. 10.1016/j.matpr.2021.10.00310.1016/j.matpr.2021.10.003 ↗
4. 10.1016/j.promfg.2018.07.10210.1016/j.promfg.2018.07.102 ↗
5. 10.1177/0892705721100645910.1177/08927057211006459 ↗
6. 10.1177/0892705723118571010.1177/08927057231185710 ↗
7. 10.3390/ma1515540510.3390/ma15155405 ↗
8. 10.3390/polym1207152910.3390/polym12071529 ↗
9. 10.2478/amm-2013-018610.2478/amm-2013-0186 ↗
10. 10.1177/0892705722109498410.1177/08927057221094984 ↗
11. 10.1155/2020/618714910.1155/2020/6187149 ↗
12. 10.1142/S0218625X2230002710.1142/S0218625X22300027 ↗
13. 10.1016/j.jmrt.2022.03.01310.1016/j.jmrt.2022.03.013 ↗
14. Menderes KAM, Saruhan H, Ipekci A. Investigation the effects of 3D printer system vibrations on mechanical properties of the printed products. Sigma J Eng Nat Sci 2018; 36(3): 655–666.
15. 10.29130/dubited.44122110.29130/dubited.441221 ↗
16. 10.1177/0892705722109295210.1177/08927057221092952 ↗
17. 10.1177/089270571986415010.1177/0892705719864150 ↗
18. 10.1177/089270572199789210.1177/0892705721997892 ↗
19. 10.1177/0892705722109232710.1177/08927057221092327 ↗
20. 10.1177/0892705723117080510.1177/08927057231170805 ↗
21. 10.1177/089270572092512310.1177/0892705720925123 ↗
22. 10.1007/s11947-019-02287-x10.1007/s11947-019-02287-x ↗
23. 10.1016/j.promfg.2018.06.10810.1016/j.promfg.2018.06.108 ↗
24. 10.3390/polym1311167110.3390/polym13111671 ↗
25. 10.3390/app1116727210.3390/app11167272 ↗
26. 10.1016/j.matpr.2022.01.42910.1016/j.matpr.2022.01.429 ↗
27. 10.1108/RPJ-06-2014-007610.1108/RPJ-06-2014-0076 ↗
28. 10.1016/j.triboint.2011.04.00810.1016/j.triboint.2011.04.008 ↗
29. 10.1016/j.wear.2003.10.02710.1016/j.wear.2003.10.027 ↗
30. 10.1016/S0043-1648(96)07314-010.1016/S0043-1648(96)07314-0 ↗
31. 10.1002/pen.1070210.1002/pen.10702 ↗
32. 10.1002/1099-0488(20010101)39:1<47::AID-POLB50>3.0.CO;2-210.1002/1099-0488(20010101)39:1<47::AID-POLB50>3.0.CO;2-2 ↗
33. 10.1002/pen.1041610.1002/pen.10416 ↗
34. 10.1002/pen.1122210.1002/pen.11222 ↗
35. 10.1002/pen.1036110.1002/pen.10361 ↗
36. 10.1016/0301-679X(96)00014-X10.1016/0301-679X(96)00014-X ↗
37. 10.3390/nano703006610.3390/nano7030066 ↗
38. 10.1016/j.mser.2008.10.00110.1016/j.mser.2008.10.001 ↗
39. 10.1002/pen.1108410.1002/pen.11084 ↗
40. 10.1016/0301-679X(90)90055-T10.1016/0301-679X(90)90055-T ↗
41. 10.1243/13506500276235532510.1243/135065002762355325 ↗
42. 10.1016/0301-679X(81)90050-510.1016/0301-679X(81)90050-5 ↗
43. 10.1177/135065012096640710.1177/1350650120966407 ↗
44. 10.1007/s13369-023-08077-010.1007/s13369-023-08077-0 ↗
45. 10.1016/j.triboint.2019.10595310.1016/j.triboint.2019.105953 ↗
46. Harsha KM Rao YS. Comparison of wear behaviour of polymer spur gears using FDM process. In: IOP Conference Series: Materials Science and Engineering Greater Noida India July 2021: IOP Publishing Vol. 1168 No. 1 p. 012028.10.1088/1757-899X/1168/1/012028 ↗
47. Šimek J. Application of a new type of aerodynamic tilting pad journal bearing in power gyroscope. Eng Mech 2012; 19(5): 359–368.
48. 10.1016/0301-679X(78)90118-410.1016/0301-679X(78)90118-4 ↗
49. Duman MS Kaplan E Cuvalcı O. Stress analysis and fatigue behaviour of PTFE-bronze layered journal bearing under real-time dynamic loading. In: IOP Conference Series: Materials Science and Engineering Nevsehir Turkey 2018: IOP Publishing. Vol. 295 No. 1 p. 012024.10.1088/1757-899X/295/1/012024 ↗
50. 10.1115/1.171510410.1115/1.1715104 ↗
51. 10.1016/j.jmapro.2020.02.00910.1016/j.jmapro.2020.02.009 ↗
52. 10.1016/j.promfg.2017.07.07910.1016/j.promfg.2017.07.079 ↗
53. 10.1016/j.addma.2021.10237810.1016/j.addma.2021.102378 ↗
54. 10.1007/978-981-16-0673-1_1710.1007/978-981-16-0673-1_17 ↗
55. Mourya V Bhore SP. Effect of corrosion pit on the structural characteristics of foil journal bearings. In: Gas Turbine India Conference Online December 2021: American Society of Mechanical Engineers. DOI: 10.1115/GTINDIA2021-76028.10.1115/GTINDIA2021-76028 ↗
56. 10.1016/j.biotri.2023.10024110.1016/j.biotri.2023.100241 ↗
57. 10.1080/10298436.2019.165410310.1080/10298436.2019.1654103 ↗
58. 10.1088/2631-8695/ac612110.1088/2631-8695/ac6121 ↗
59. 10.24874/ti.1334.07.22.1110.24874/ti.1334.07.22.11 ↗