journal article·2024-05

Study on buried polyethylene pipe reinforced by steel wires under internal pressure and foundation settlement

Jun Shi, Nanming Yu, Li Zeng, Hanxin Chen, Xiang Li

Publisher page

Abstract

A polyethylene pipe reinforced by winding steel wires (PSP) consists of steel wires and high- density Polyethylene (HDPE). Due to its unique structure and combination of material, the PSP possesses excellent mechanical properties, and it has been widely used in many fields as a buried pipe. Foundation settlement is an evitable loading, and strength failure of buried PSP sometimes occurs due to the foundation settlement. In this paper, numerical investigation of failure behavior of buried PSP was conducted. Firstly, groups of uniaxial tensile tests were carried out to acquire the rate-dependent constitutive equation of the HDPE. Secondly, finite element model of PSP embedded in soil subject to foundation settlement was established. Steel wires are represented by truss elements, and HDPE pipes were modeled with solid elements. The steel wires are built in a spiral structure similar to the real steel-wire mesh of PSP. The effect of the nonlinear material property of components were considered in the model, as the tensile curves were input into the model. The PSP was buried in soil, and foundation settlement was applied on a part of the soil’s top surface as the displacement boundary condition. Due to the great ductility of HDPE, the steel wires broke prior to the HDPE, so the maximum stress of steel wires was used as the failure criterion of PSP. Once the maximum stress of steel wires exceeds the ultimate strength, PSP was considered to have failed. Based on this model, the stress distribution along PSP was investigated with various internal pressure and settlement displacement. The combined influence of the internal pressure and foundation settlement on PSP failure behavior was analyzed, and the location where failure most possibly occurred was determined under different loading conditions. Furthermore, the influence of different structural parameters of PSP and soil was discussed.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Geotechnical Engineering and Underground Structures · Mechanical stress and fatigue analysis · Structural Integrity and Reliability Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Hubei Provincial Key Laboratory of Chemical Equipment Intensification and Intrinsic Safety, School of Mechanical and Electrical Engineering, Wuhan Institute of Technology, Wuhan, China

Department of Pressure Vessel, China Special Equipment Inspection & Research Institute, Beijing, China

Funding

the research fund of Wuhan Institute of Technology · the National Natural Science Foundation of China · the Foundation of Wuhan Science and Technology Bureau · the Open Research Fund Program of Hubei Provincial Key Laboratory of Chemical Equipment Intensification and Intrinsic Safety

References (33)

Show source-provided references
1. 10.1177/073168441562068710.1177/0731684415620687 ↗
2. Zheng JY, Li X, Xu P, et al. Analyses on the short-term mechanical properties of plastic pipe reinforced by cross helically wound steel wires. New York: J Press Vess-T ASME, 2009; 131.
3. 10.1631/jzus.A07147610.1631/jzus.A071476 ↗
4. 10.1016/j.compstruct.2014.11.01410.1016/j.compstruct.2014.11.014 ↗
5. 10.1115/1.404715910.1115/1.4047159 ↗
6. Shi J, Shi JF, Chen HX, et al. Short-term mechanical analysis of polyethylene pipe reinforced by winding steel wires using steel wire spiral structural model. New York: J press vess-T ASME, 2018; 140.
7. 10.1016/j.tws.2021.10838110.1016/j.tws.2021.108381 ↗
8. 10.1177/073168442096257710.1177/0731684420962577 ↗
9. 10.1177/073168441771366610.1177/0731684417713666 ↗
10. 10.1177/073168441350015910.1177/0731684413500159 ↗
11. 10.1177/089270571881140510.1177/0892705718811405 ↗
12. 10.1177/089270571036797810.1177/0892705710367978 ↗
13. 10.1016/j.engfailanal.2014.11.01410.1016/j.engfailanal.2014.11.014 ↗
14. Luo XP, Ma JJ, Zheng JY, et al. Finite element analysis of buried polyethylene pipe subjected to seismic landslide. New York: J Press Vess-T ASME 2014; 136.
15. 10.1016/j.matdes.2009.08.04510.1016/j.matdes.2009.08.045 ↗
16. 10.1016/j.engfailanal.2012.05.01110.1016/j.engfailanal.2012.05.011 ↗
17. 10.1016/j.engfailanal.2012.03.00810.1016/j.engfailanal.2012.03.008 ↗
18. 10.1016/j.engfailanal.2022.10613010.1016/j.engfailanal.2022.106130 ↗
19. 10.1016/j.engfailanal.2021.10566310.1016/j.engfailanal.2021.105663 ↗
20. 10.1016/j.engfailanal.2020.10449210.1016/j.engfailanal.2020.104492 ↗
21. 10.1016/j.ijpvp.2020.10427010.1016/j.ijpvp.2020.104270 ↗
22. 10.1177/089270570909599610.1177/0892705709095996 ↗
23. 10.1061/(ASCE)0899-1561(2004)16:6(511)10.1061/(ASCE)0899-1561(2004)16:6(511) ↗
24. 10.3390/polym1407135710.3390/polym14071357 ↗
25. Ma JJ. Numerical simulation of strength of buried polyethylene pipe under typical complex loading. MD Thesis.Hangzhou: Zhejiang Unversity, 2013.
26. ISO 527-1:2019. Plastics - Determination of tensile properties - Part 1: General principles.
27. Tao J. Study on yield behavior and macroscopic phenomenological constitutive model of semi-crystalline polymers. PhD Thesis Taiyuan University of Technology Taiyuan 2016.
28. 10.3390/polym603061310.3390/polym6030613 ↗
29. 10.1080/15376494.2018.150879610.1080/15376494.2018.1508796 ↗
30. 10.1016/j.ijimpeng.2013.05.00210.1016/j.ijimpeng.2013.05.002 ↗
31. 10.1016/j.euromechsol.2010.08.00210.1016/j.euromechsol.2010.08.002 ↗
32. 10.1016/j.engfailanal.2019.10435110.1016/j.engfailanal.2019.104351 ↗
33. Gere JM, Goodno BJ. Mechanics of materials. Lenexa: Cengage learning, 2012.