Microstructure generation of long fiber reinforced hybrid composites using the fused sequential addition and migration method
Source abstract
Abstract
We present a fused sequential addition and migration (fSAM) algorithm to generate synthetic microstructures for long fiber reinforced hybrid composites. To incorporate the bending of long fibers, we model the fibers as polygonal chains and use an optimization framework to search for a non-overlapping fiber configuration with the desired properties. As microstructures of hybrid composites consist of materials with varying characteristics, e.g., different fiber orientation distributions or fiber volume fractions, the unit cell needs to be divided in subcells. Then, the objective function is required to account for the characteristics of the subcells individually. To ensure that the location of a fiber is restricted to its respective subcell, we apply box constraints during the optimization procedure. Depending on the materials and the manufacturing processes, the interfaces within hybrid composites show either strict separation or interlocking of the different materials. Hence, we enable selecting the box-constraint type to model the interface according to the desired composite. We provide a detailed discussion of the extensions of the original fSAM algorithm to generate hybrid composites, considering two alternative procedures to handle the box constraints during the optimization procedure. As the selection of the box-constraint type influences the synthetic microstructures, we investigate the shape of the interfacial areas and the computed effective stiffnesses. Last but not least, to validate the capability of the fSAM algorithm to generate representative microstructures, we compare the resulting mechanical behavior with experimental data.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Composite Material Mechanics · Numerical methods in engineering · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Karlsruhe Institute of Technology (KIT)
University of Duisburg-Essen
Funding
Deutsche Forschungsgemeinschaft · HORIZON EUROPE European Research Council
References (100+)
Show source-provided references
1. 10.1016/j.compositesb.2019.04.00110.1016/j.compositesb.2019.04.001 ↗
2. Schüle H, Eyerer P. Polymer engineering. Berlin: Springer, 2020, 2.
3. 10.1016/j.compositesb.2022.11038010.1016/j.compositesb.2022.110380 ↗
4. Böhlke T, Henning F, Hrymak A, et al. Continuous—discontinuous fiber-reinforced polymers — an integrated engineering approach. Munich: Carl Hanser, 2019.
5. 10.1016/j.jcp.2016.10.07010.1016/j.jcp.2016.10.070 ↗
6. 10.1038/s41563-020-00913-010.1038/s41563-020-00913-0 ↗
7. Elmasry A, Azoti W, El-Safty SA, et al. A comparative review of multiscale models for effective properties of nano- and micro-composites. Comput Mech 2022; 132: 101022.
8. Kozlov SM. Averaging of differential operators with almost periodic rapidly oscillating coefficients. Math USSR Sbornik 1978; 107 (149)(2 (10)): 199–217.
9. Papanicolaou GC, Varadhan SRS. Boundary value problems with rapidly oscillating random coefficients. Random fields, Vol. I, II (Esztergom, 1979), Colloq. Math. Soc. János Bolyai. Amsterdam-New York: North-Holland, 1981, Volume 27, pp. 835–873.
10. 10.1063/1.114704310.1063/1.1147043 ↗
11. 10.1016/j.compscitech.2004.03.00310.1016/j.compscitech.2004.03.003 ↗
12. 10.1016/j.compscitech.2015.05.02010.1016/j.compscitech.2015.05.020 ↗
13. 10.3390/jcs101000210.3390/jcs1010002 ↗
14. 10.1016/S0020-7683(03)00143-410.1016/S0020-7683(03)00143-4 ↗
15. 10.1016/j.crme.2004.10.00310.1016/j.crme.2004.10.003 ↗
16. 10.1016/j.jmps.2021.10465210.1016/j.jmps.2021.104652 ↗
17. 10.1063/1.172654810.1063/1.1726548 ↗
18. 10.1016/0022-5193(80)90358-610.1016/0022-5193(80)90358-6 ↗
19. Tian W, Qi L, Zhou J, et al. Representative volume element for composites reinforced by spatially randomly distributed discontinuous fibers and its applications. Compos Struct 2013; 131(7): 366–373.
20. 10.1007/s12221-019-1178-910.1007/s12221-019-1178-9 ↗
21. 10.1016/j.compstruct.2019.01.05610.1016/j.compstruct.2019.01.056 ↗
22. 10.1016/j.compscitech.2021.10864710.1016/j.compscitech.2021.108647 ↗
23. 10.1016/j.compscitech.2023.11000810.1016/j.compscitech.2023.110008 ↗
24. 10.1016/j.compstruct.2023.11735210.1016/j.compstruct.2023.117352 ↗
25. Coelho D, Thovert JF, Adler PM. Geometrical and transport properties of random packings of spheres and aspherical particles. Phys Rev 1997; 55(2): 1959–1978.
26. Pan Y, Iorga L, Pelegri AA. Numerical generation of a random chopped fiber composite RVE and its elastic properties. Compos Sci Technol 2006; 68: 56–66.
27. 10.1007/BF0102598310.1007/BF01025983 ↗
28. Torquato S, Jiao Y. Dense packings of polyhedra: platonic and archimedean solids. Phys Rev 2009; 80(4): 041104.
29. Torquato S, Jiao Y. Robust algorithm to generate a diverse class of dense disordered and ordered sphere packings via linear programming. Phys Rev 2009; 82(6): 061302.
30. Williams S, Philipse A. Random packings of spheres and spherocylinders simulated by mechanical contraction. Phys Rev 2003; 67(5): 1–9.
31. 10.1007/s00466-016-1350-710.1007/s00466-016-1350-7 ↗
32. 10.1007/s00466-022-02201-x10.1007/s00466-022-02201-x ↗
33. 10.1016/j.compscitech.2019.10775210.1016/j.compscitech.2019.107752 ↗
34. 10.1016/j.compscitech.2014.09.00910.1016/j.compscitech.2014.09.009 ↗
35. 10.1177/002199830808860610.1177/0021998308088606 ↗
36. 10.3390/jcs403010410.3390/jcs4030104 ↗
37. Mehta A, Schneider M. A maximum-entropy length-orientation closure for short-fiber reinforced composites. Comput Mech 2024; Online First: 1–26.
38. 10.1002/nme.711010.1002/nme.7110 ↗
39. 10.1002/nme.757310.1002/nme.7573 ↗
40. 10.1007/978-1-4757-2201-710.1007/978-1-4757-2201-7 ↗
41. Petersen P. Riemannian geometry. In: Graduate texts in mathematics. Heidelberg: Springer, 2016, vol 171.
42. 10.1016/0020-7225(84)90090-910.1016/0020-7225(84)90090-9 ↗
43. 10.1122/1.54994510.1122/1.549945 ↗
44. 10.1007/BF0158127510.1007/BF01581275 ↗
45. 10.1007/BF0102710710.1007/BF01027107 ↗
46. 10.1137/1.978089871861410.1137/1.9780898718614 ↗
47. 10.1016/j.cma.2005.01.00410.1016/j.cma.2005.01.004 ↗
48. 10.1139/tcsme-1989-001410.1139/tcsme-1989-0014 ↗
49. 10.1016/S0167-2789(99)00054-810.1016/S0167-2789(99)00054-8 ↗
50. García AG. Random packings via mechanical contraction. Utrecht: Universiteit Utrecht, 2015.
51. 10.1017/CBO978051180444110.1017/CBO9780511804441 ↗
52. 10.1177/1056789521101906510.1177/10567895211019065 ↗
53. 10.1080/00029890.1969.1200021710.1080/00029890.1969.12000217 ↗
54. 10.1007/s10853-009-4016-410.1007/s10853-009-4016-4 ↗
55. 10.5566/ias.148910.5566/ias.1489 ↗
56. 10.1177/07316844840030020110.1177/073168448400300201 ↗
57. 10.1122/1.55063010.1122/1.550630 ↗
58. 10.1016/j.compscitech.2006.07.00810.1016/j.compscitech.2006.07.008 ↗
59. 10.3390/jcs303006710.3390/jcs3030067 ↗
60. 10.3390/jcs402006910.3390/jcs4020069 ↗
61. 10.1122/8.000024510.1122/8.0000245 ↗
62. 10.1016/j.jnnfm.2023.10504910.1016/j.jnnfm.2023.105049 ↗
63. 10.1017/jfm.2011.16510.1017/jfm.2011.165 ↗
64. 10.1016/j.jnnfm.2010.12.01010.1016/j.jnnfm.2010.12.010 ↗
65. DOW® Chemical Company. C711–70RNA polypropylene resin. Product information, 2003.
66. PPG fiber glass TufRov® 4575. Data Sheet, 2013.
67. 10.1016/j.mechmat.2022.10430710.1016/j.mechmat.2022.104307 ↗
68. Moulinec H, Suquet P. A fast numerical method for computing the linear and nonlinear mechanical properties of composites. Comptes Rendus de l’Académie des Sciences Série II 1994; 318(11): 1417–1423.
69. 10.1016/S0045-7825(97)00218-110.1016/S0045-7825(97)00218-1 ↗
70. 10.1002/nme.500810.1002/nme.5008 ↗
71. 10.1016/j.jcp.2010.07.01010.1016/j.jcp.2010.07.010 ↗
72. 10.1016/j.cma.2012.01.00310.1016/j.cma.2012.01.003 ↗
73. 10.1016/0167-6636(85)90012-210.1016/0167-6636(85)90012-2 ↗
74. 10.1016/j.commatsci.2019.10945610.1016/j.commatsci.2019.109456 ↗
75. 10.1016/j.commatsci.2023.11228610.1016/j.commatsci.2023.112286 ↗
76. 10.1002/mma.325910.1002/mma.3259 ↗
77. 10.1016/0022-5096(63)90036-X10.1016/0022-5096(63)90036-X ↗
78. 10.1016/0022-5096(96)00007-510.1016/0022-5096(96)00007-5 ↗
79. 10.1214/10-AOP57110.1214/10-AOP571 ↗
80. 10.1016/j.compositesa.2016.12.01810.1016/j.compositesa.2016.12.018 ↗
81. 10.1002/pc.75013040910.1002/pc.750130409 ↗
82. 10.3390/fib905003210.3390/fib9050032 ↗
83. Ernesti F, Schneider M. Computing the effective crack energy of heterogeneous and anisotropic microstructures via anisotropic minimal surfaces. Comput Mech 2021; 69(3): 45–57.
84. 10.1007/s00419-023-02472-710.1007/s00419-023-02472-7 ↗
85. 10.1177/0892705723122347110.1177/08927057231223471 ↗
86. Altech®. Technical datasheet ALTECH PA6 A 1000/677 2020.
87. 10.1023/A:101441150317010.1023/A:1014411503170 ↗
88. ZOLTEK Corporation. Technical datasheet ZOLTEKTM PX35 vinyl ester compatible tow 2019.
89. Fiedler B, Holst S, Hobbiebrunken T, et al. Modelling of the initial failure of CFRP structures by partial discretisation: a micro / macro-mechanical approach of first ply failure. Compos Adv Mater 2004; 13: 219–226.
90. Krause W, Henning F, Tröster S, et al. LFT-D — a process Technology for large scale production of fiber reinforced thermoplastic components. J Thermoplast Compos Mater 2003; 289–302(4): 117352.
91. 10.3390/polym1607097610.3390/polym16070976 ↗
92. DOMO. Technical datasheet TECHNYL® LITE C130 C60 2023.
93. 10.1016/j.ijmecsci.2024.10947010.1016/j.ijmecsci.2024.109470 ↗
94. Böhlke T, Brüggemann C. Graphical representation of the generalized Hooke’s law. Tech Mech 2001; 21(2): 145–158.
95. 10.1016/j.matdes.2017.03.01010.1016/j.matdes.2017.03.010 ↗
96. 10.3390/polym1509204110.3390/polym15092041 ↗
97. 10.1016/j.compstruct.2018.10.09610.1016/j.compstruct.2018.10.096 ↗
98. 10.1007/s42452-020-04009-x10.1007/s42452-020-04009-x ↗
99. 10.1016/j.compscitech.2024.11064910.1016/j.compscitech.2024.110649 ↗
100. Yarlagadda S Deitzel J Heider D et al. Tailorable universal feedstock for forming (TUFF): overview and performance. In: Proceedings of the International SAMPE Technical Conference. Charlotte NC USA 2019.10.33599/nasampe/s.19.1605 ↗