Influence of fiber concentration and length on the dielectric, mechanical, and thermal properties of maple wood fiber-reinforced polypropylene
Source abstract
Abstract
Natural fiber-reinforced polymer composites are gaining popularity due to their sustainability and enhanced properties compared to pure polymers. Recently, these composites have been utilized as dielectric materials. In this study, polypropylene (PP) reinforced with maple wood fibers of different lengths (50, 75, and 100 µm) and various fiber concentrations (5%, 10%, 15%, and 20%) were examined. The effects of fiber length and concentration on the dielectric, mechanical, and thermal properties were investigated. All composites exhibited a higher dielectric constant and conductivity than pure PP, along with a lower loss factor. This suggests that adding maple wood fibers generally enhances the dielectric properties. As fiber concentration increases, the dielectric constant tends to rise while the loss factor tends to decrease. TGA results indicated that adding more fibers reduces thermal stability at low temperatures but increases stability at high temperatures. Mechanical testing revealed an increase in strength but a decrease in elongation. However, fiber length did not significantly impact the mechanical properties. SEM analysis showed a uniform distribution of fibers at 5% weight that improves strength, while a 20% weight leads to clustering that weakens the composite.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Natural Fiber Reinforced Composites · Additive Manufacturing and 3D Printing Technologies · Advanced Cellulose Research Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Engineering, UQAT, Université du Québec en Abitibi-Témiscamingue, Rouyn-Noranda, QC, Canada
Forest Research Institute, UQAT, Université du Québec en Abitibi-Témiscamingue, Rouyn-Noranda, QC, Canada
Faculty of Processing, Iran Polymer and Petrochemical Institute, Tehran, Iran
Funding
Fondation J.A. DeSève · Fondation de l’UQAT
References (57)
Show source-provided references
1. 10.3390/ijms1601056410.3390/ijms16010564 ↗
2. 10.1007/978-3-030-68024-4_2010.1007/978-3-030-68024-4_20 ↗
3. 10.1038/nature1454310.1038/nature14543 ↗
4. 10.1016/j.matpr.2021.12.59210.1016/j.matpr.2021.12.592 ↗
5. 10.1038/s41529-022-00277-710.1038/s41529-022-00277-7 ↗
6. 10.1126/science.abg543310.1126/science.abg5433 ↗
7. 10.1016/j.matpr.2021.08.03410.1016/j.matpr.2021.08.034 ↗
8. 10.1007/s10924-011-0349-610.1007/s10924-011-0349-6 ↗
9. 10.1016/j.apmt.2024.10236110.1016/j.apmt.2024.102361 ↗
10. 10.1016/j.matchemphys.2024.12973710.1016/j.matchemphys.2024.129737 ↗
11. 10.3390/polym1606083110.3390/polym16060831 ↗
12. Jubsilp C, Mora P, Bielawski CW, et al. Thermosetting matrix based glass and carbon fiber composites. Fiber Reinf Compos Const Compat Perspect Appl 2021: 341–403.
13. Dhiman B, Guleria V, Sharma P. Applications and future trends of carbon fiber reinforced polymer composites: a review. Int Res J Eng Technol 2020; 7: 1–7.
14. 10.1016/j.rineng.2021.10026310.1016/j.rineng.2021.100263 ↗
15. 10.3390/molecules2602040410.3390/molecules26020404 ↗
16. 10.1177/0892705724125432410.1177/08927057241254324 ↗
17. 10.1177/089270571984454610.1177/0892705719844546 ↗
18. 10.1177/089270571037647010.1177/0892705710376470 ↗
19. 10.1177/089270571876147610.1177/0892705718761476 ↗
20. Farshid B, Safdari V, Nourbakhsh A, et al. The effects of fiber length and fiber loading on the mechanical properties of wood-plastic (polypropylene) composites. Turk J Agric For 2010; 34: 191–196.
21. 10.3390/en1410275810.3390/en14102758 ↗
22. 10.3390/polym1403043110.3390/polym14030431 ↗
23. 10.63995/IYWJ693610.63995/IYWJ6936 ↗
24. 10.1080/15583724.2022.212968010.1080/15583724.2022.2129680 ↗
25. 10.1002/advs.20220243810.1002/advs.202202438 ↗
26. 10.1002/adma.20230867010.1002/adma.202308670 ↗
27. 10.1016/j.nanoen.2021.10643810.1016/j.nanoen.2021.106438 ↗
28. 10.1016/j.heliyon.2024.e3473710.1016/j.heliyon.2024.e34737 ↗
29. 10.1021/acsapm.0c0034910.1021/acsapm.0c00349 ↗
30. 10.1016/j.mssp.2022.10675410.1016/j.mssp.2022.106754 ↗
31. Luo Q Shen H Zhou G et al. Dielectric properties of cellulose and nanocellulose-based materials.
32. Nayak N, Reddappa HN, Kalagi G, et al. Electrical insulating properties of natural fibre reinforced polymer composites; a review. Int J Eng Res 2017; 6: 166–171.
33. 10.1016/j.indcrop.2021.11392810.1016/j.indcrop.2021.113928 ↗
34. 10.1016/j.indcrop.2024.11849310.1016/j.indcrop.2024.118493 ↗
35. 10.1016/j.elstat.2013.12.00610.1016/j.elstat.2013.12.006 ↗
36. 10.1016/j.compositesa.2012.11.00910.1016/j.compositesa.2012.11.009 ↗
37. 10.1002/app.3291010.1002/app.32910 ↗
38. 10.1039/C7RA00686A10.1039/C7RA00686A ↗
39. Li N Li X Yao A et al. Effect fiber length on mechanical and thermal properties of glass fiber reinforced polyphenylene sulfide composite. Epub ahead of print February 2024. DOI: 10.1177/07316844241232960.10.1177/07316844241232960 ↗
40. Norizan MN Abdan K Salit MS et al. Physical mechanical and thermal properties of sugar palm yarn fibre loading on reinforced unsaturated polyester composites. J Phys Sci; 28: 115.10.21315/jps2017.28.3.8 ↗
41. 10.1007/s00289-020-03382-210.1007/s00289-020-03382-2 ↗
42. 10.1080/0022235810808001410.1080/00222358108080014 ↗
43. 10.1002/(SICI)1098-2329(199924)18:4<351::AID-ADV6>3.0.CO;2-X10.1002/(SICI)1098-2329(199924)18:4<351::AID-ADV6>3.0.CO;2-X ↗
44. 10.15376/biores.8.3.4619-463210.15376/biores.8.3.4619-4632 ↗
45. 10.1007/s10924-008-0113-810.1007/s10924-008-0113-8 ↗
46. 10.1177/089270571453579510.1177/0892705714535795 ↗
47. Yuan Q Wu D Gotama J et al. Wood fiber reinforced polyethylene and polypropylene composites with high modulus and impact strength. 2008; 21: 195–208.10.1177/0892705708089472 ↗
48. 10.1016/j.jallcom.2017.09.08210.1016/j.jallcom.2017.09.082 ↗
49. 10.1016/j.carbpol.2018.06.08810.1016/j.carbpol.2018.06.088 ↗
50. 10.1016/j.compositesa.2011.11.01810.1016/j.compositesa.2011.11.018 ↗
51. Pathania D, Singh D. A review on electrical properties of fiber reinforced polymer composites. Int J Theor Appl Sci 2009; 1: 34–37.
52. 10.3390/jcs804011710.3390/jcs8040117 ↗
53. 10.1088/2053-1591/ada1a610.1088/2053-1591/ada1a6 ↗
54. 10.1002/app.4614710.1002/app.46147 ↗
55. Panaitescu DM, Notingher PV, Ghiurea M, et al. Properties of composite materials from polyethylene and cellulose microfibrils. J Optoelectron Adv Mater 2007; 9: 2524–2528.
56. Markiewicz E, Paukszta D, Borysiak S. Acoustic and dielectric properties of polypropylene-lignocellulosic materials composites. In: Polypropylene. London: InTech, 2012, pp. 193–217.
57. 10.1109/MEI.2006.170585410.1109/MEI.2006.1705854 ↗