journal article·2025-05

Advancement of nanofiller reinforced fused filament fabrication polymers: A path to sustainable, weather-resistant 3D printing materials

Sagar Kailas Gawali, Prashant Kumar Jain

Publisher page

Abstract

Recent studies have focused on developing new materials capable of withstanding diverse environmental or weathering conditions, including sunlight, temperature, moisture, and chemicals, for various outdoor applications. Nowadays, nanotechnological advancements have opened possibilities for the development of polymer nanocomposites, which exhibit superior mechanical and weathering properties over traditional materials. However, there is limited literature available that summarizes the improvements in the mechanical and weathering properties of nanocomposites specifically for FFF. This paper provides a concise review of composite material development through the incorporation of nanofillers (NFs) to enhance product strength and durability. The primary focus is on examining the effect of the inorganic nanofillers, especially metal oxides NFs (TiO 2 , ZnO, SiO 2 ), on the mechanical and weathering properties of the polymers in different manufacturing processes. Paper also covered the challenges and opportunities along with the applications of metal oxide-based polymer nanocomposites for outdoor use.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Advanced Sensor and Energy Harvesting Materials · biodegradable polymer synthesis and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

FFF Lab, Mechanical Engineering Discipline, PDPM Indian Institute of Information Technology, Design & Manufacturing, Jabalpur, India

References (87)

Show source-provided references
1. 10.1002/adfm.20200306210.1002/adfm.202003062 ↗
2. 10.1007/s12008-022-01097-410.1007/s12008-022-01097-4 ↗
3. 10.1016/j.matpr.2021.02.48510.1016/j.matpr.2021.02.485 ↗
4. 10.1177/0892705722110285710.1177/08927057221102857 ↗
5. 10.1007/s13369-022-07539-110.1007/s13369-022-07539-1 ↗
6. 10.3390/polym1403046510.3390/polym14030465 ↗
7. Dixit G Pandey PM. Experimental investigations of temperature-sensitive shape memory polymer composites for 4D printing. J Thermoplast Compos Mater: 08927057241254322.
8. Gawali SK, Pandey GC, Jain PK. Experimental investigations on effect of graphite loading on melt flow behaviour of ABS-Gr composite for fused filament fabrication (FFF) process. Adv Mater Process Technol 2022; 9: 391–401.
9. 10.1007/978-3-030-73495-4_2910.1007/978-3-030-73495-4_29 ↗
10. 10.1007/978-981-15-4619-8_110.1007/978-981-15-4619-8_1 ↗
11. 10.3390/ma1517616210.3390/ma15176162 ↗
12. 10.1002/pen.2619210.1002/pen.26192 ↗
13. 10.1007/s10853-022-08068-w10.1007/s10853-022-08068-w ↗
14. 10.1016/j.jcomc.2022.10024310.1016/j.jcomc.2022.100243 ↗
15. 10.1007/s10965-021-02707-710.1007/s10965-021-02707-7 ↗
16. 10.1002/app.5079110.1002/app.50791 ↗
17. Pinho AC Piedade AP. Sandwich multi-material 3d-printed polymers: influence of aging on the impact and flexure resistances. Polymers (Basel); 13: 4030. DOI: 10.3390/polym13224030.10.3390/polym13224030 ↗
18. 10.3390/polym1323413210.3390/polym13234132 ↗
19. Moreno Nieto D Alonso-García M Pardo-Vicente MA et al. Product design by additive manufacturing for water environments: study of degradation and absorption behavior of pla and petg. Polymers (Basel); 13: 1036. DOI: 10.3390/polym13071036.10.3390/polym13071036 ↗
20. 10.1016/j.addma.2020.10176410.1016/j.addma.2020.101764 ↗
21. 10.1002/pc.2578910.1002/pc.25789 ↗
22. 10.1177/009524432096183010.1177/0095244320961830 ↗
23. 10.1080/15376494.2020.172287010.1080/15376494.2020.1722870 ↗
24. 10.1016/j.jmst.2020.01.07210.1016/j.jmst.2020.01.072 ↗
25. 10.1002/pen.2619210.1002/pen.26192 ↗
26. 10.1016/j.jmrt.2021.07.01610.1016/j.jmrt.2021.07.016 ↗
27. 10.1177/0892705722114285410.1177/08927057221142854 ↗
28. Balan GS Raj SA. Effect of additives on the performance of extruded polymer composites: a comprehensive review. J Thermoplast Compos Mater: 08927057241261314.
29. 10.1177/089270571880552810.1177/0892705718805528 ↗
30. Müller K Bugnicourt E Latorre M et al. Review on the processing and properties of polymer nanocomposites and nanocoatings and their applications in the packaging automotive and solar energy fields. Nanomaterials; 7: 74. DOI: 10.3390/nano7040074.10.3390/nano7040074 ↗
31. Vidakis N Petousis M Velidakis E et al. Optimization of the filler concentration on fused filament fabrication 3d printed polypropylene with titanium dioxide nanocomposites. Materials (Basel); 14: 3076. DOI: 10.3390/ma14113076.10.3390/ma14113076 ↗
32. 10.3390/polym1207158910.3390/polym12071589 ↗
33. Olam M Tosun N. The effect of 3D printing temperature on PLA/HA/TiO2 composite filaments. In: 4th International E-Conference on Engineering Technology and Management 24 January 2021 pp. 37–44.
34. Olam M. Determining of process parameters of the PLA/titanium dioxide/hydroxyapatite filament. Adv Mater Process Technol 2022; 8: 4776–4787.
35. 10.1016/j.matpr.2019.07.08410.1016/j.matpr.2019.07.084 ↗
36. 10.1177/089270572095319310.1177/0892705720953193 ↗
37. 10.1007/s00170-022-09376-w10.1007/s00170-022-09376-w ↗
38. Nájera SE, Michel M, Hwan JK. Characterization of 3D printed PLA/PCL/TiO2 composites for cancellous bone. J Mater Sci Eng 2018; 07: 1–9.
39. 10.3390/polym1304058010.3390/polym13040580 ↗
40. 10.1016/j.compositesb.2018.01.03210.1016/j.compositesb.2018.01.032 ↗
41. Mohr LC Capelezzo AP Baretta CRDM et al. Titanium dioxide nanoparticles applied as ultraviolet radiation blocker in the polylactic acid bidegradable polymer. Polym Test; 77: 105867. DOI: 10.1016/j.polymertesting.2019.04.014.10.1016/j.polymertesting.2019.04.014 ↗
42. Cabello-Alvarado C Reyes-Rodríguez P Andrade-Guel M et al. Melt-mixed thermoplastic nanocomposite containing carbon nanotubes and titanium dioxide for flame retardancy applications. Polymers (Basel); 11: 1204. DOI: 10.3390/polym11071204.10.3390/polym11071204 ↗
43. 10.1149/2.0341905jes10.1149/2.0341905jes ↗
44. 10.3390/nano1011214410.3390/nano10112144 ↗
45. 10.1007/s00170-022-09038-x10.1007/s00170-022-09038-x ↗
46. 10.11648/j.nsnm.20210701.1110.11648/j.nsnm.20210701.11 ↗
47. 10.1021/acsami.9b0749010.1021/acsami.9b07490 ↗
48. Zeljko M Bulatović VO Špada V et al. Environmentally friendly uv-protective polyacrylate/tio2 nanocoatings. Polymers (Basel); 13: 2609. DOI: 10.3390/polym13162609.10.3390/polym13162609 ↗
49. 10.1016/j.compositesb.2016.06.01210.1016/j.compositesb.2016.06.012 ↗
50. 10.1016/j.porgcoat.2016.10.00710.1016/j.porgcoat.2016.10.007 ↗
51. 10.5755/j01.ms.22.3.821710.5755/j01.ms.22.3.8217 ↗
52. 10.1016/j.apsusc.2017.04.23410.1016/j.apsusc.2017.04.234 ↗
53. 10.3390/polym1420431210.3390/polym14204312 ↗
54. 10.1016/j.jmapro.2020.10.02710.1016/j.jmapro.2020.10.027 ↗
55. 10.1016/j.jmapro.2021.01.00310.1016/j.jmapro.2021.01.003 ↗
56. 10.1177/089270572093596110.1177/0892705720935961 ↗
57. 10.3390/mi1106061510.3390/mi11060615 ↗
58. 10.1039/C8NR06788K10.1039/C8NR06788K ↗
59. 10.1016/j.polymertesting.2020.10652610.1016/j.polymertesting.2020.106526 ↗
60. 10.1016/j.surfcoat.2018.11.08010.1016/j.surfcoat.2018.11.080 ↗
61. Wasim M Khan MR Mushtaq M et al. Surface modification of bacterial cellulose by copper and Zinc Oxide sputter coating for UV-resistance/antistatic/antibacterial characteristics. Coatings; 10: 364. DOI: 10.3390/coatings10040364.10.3390/coatings10040364 ↗
62. 10.1007/s11998-020-00411-710.1007/s11998-020-00411-7 ↗
63. Rahman MM. Polyurethane/zinc oxide (PU/ZnO) composite-synthesis protective property and application. Polymers (Basel); 12: 1535. DOI: 10.3390/polym12071535.10.3390/polym12071535 ↗
64. 10.1016/j.jcis.2018.10.10510.1016/j.jcis.2018.10.105 ↗
65. 10.1515/hf-2019-031210.1515/hf-2019-0312 ↗
66. 10.15376/biores.13.3.6480-649610.15376/biores.13.3.6480-6496 ↗
67. 10.1016/j.fpsl.2019.10032710.1016/j.fpsl.2019.100327 ↗
68. 10.3390/polym1312202910.3390/polym13122029 ↗
69. 10.3390/nano1104101210.3390/nano11041012 ↗
70. 10.1016/j.polymer.2018.10.00410.1016/j.polymer.2018.10.004 ↗
71. 10.1016/j.compositesb.2019.10742810.1016/j.compositesb.2019.107428 ↗
72. 10.1088/1757-899X/416/1/01208610.1088/1757-899X/416/1/012086 ↗
73. 10.1016/j.compscitech.2021.10916710.1016/j.compscitech.2021.109167 ↗
74. 10.3390/polym1315242310.3390/polym13152423 ↗
75. 10.1007/s12633-020-00878-410.1007/s12633-020-00878-4 ↗
76. 10.3390/polym1403050910.3390/polym14030509 ↗
77. 10.3390/jcs401002310.3390/jcs4010023 ↗
78. 10.1016/j.optmat.2021.11137110.1016/j.optmat.2021.111371 ↗
79. 10.3390/polym1316267310.3390/polym13162673 ↗
80. 10.3390/polym1210229810.3390/polym12102298 ↗
81. Hedayati F Sabahi S Laleh NB et al. Preparation and properties of enhanced nanocomposites based on PLA / PC blends reinforced with silica nanoparticles. 2019; 31: 1–8.10.1002/pat.4797 ↗
82. 10.1007/s13726-021-00962-510.1007/s13726-021-00962-5 ↗
83. 10.1063/5.000192710.1063/5.0001927 ↗
84. 10.1002/pi.582410.1002/pi.5824 ↗
85. Li W, Wang C, Lei W. Preparation and in-vitro degradation properties of 3D printed nano silica / hydroxyapatite / polylactide biocomposite. DEStech Transactions on Biology and Health. 2017; 233–238.
86. Meng S, He H, Jia Y, et al. Effect of nanoparticles on the mechanical properties of acrylonitrile – butadiene – styrene specimens fabricated by fused deposition modeling. J Appl Polym Sci 2016; 44470: 1–9.
87. 10.1016/j.porgcoat.2020.10555610.1016/j.porgcoat.2020.105556 ↗