journal article·2025-03Open access

Enhancing 3D-Printed PP-CF parts: A novel resin-filling technique for mechanical property optimization

Meltem Eryildiz, Ergin Kosa, Ismail Cem Akgun, Bekir Yavuzer

Abstract

This study investigates a novel post-processing technique aimed at enhancing the mechanical properties of 3D-printed polypropylene-carbon fiber (PP-CF) composite parts. The method involves printing components with internal voids to reduce weight and printing time, subsequently filling these voids with a low-cost resin known for its superior mechanical properties. Through systematic experimentation varying infill density and pattern, key quantitative findings were obtained. Tensile strength generally increased with higher infill density, reaching a maximum of 55.664 MPa for the resin-filled triangle infill pattern with 60% infill density. Impact energy showed a decreasing trend with increasing infill density, with the highest impact energy of 0.5 J recorded for the resin-filled triangle infill pattern with 60% infill density. Microstructural analysis revealed that the triangle infill pattern at 60% infill density exhibited the most effective resin penetration, contributing to superior mechanical performance. These findings emphasize the importance of infill pattern selection in resin distribution and mechanical enhancement in 3D-printed composite materials.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Manufacturing Process and Optimization · Injection Molding Process and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Istanbul Beykent University, Istanbul, Turkey

Istanbul Technical University, Istanbul, Turkey

References (25)

Show source-provided references
1. 10.1007/s10924-022-02516-z10.1007/s10924-022-02516-z ↗
2. Nadeem H · J Thermoplast Compos Mater · 2023 · 37 · 089270572311933
3. 10.3390/technologies903006110.3390/technologies9030061 ↗
4. 10.3390/polym1310155910.3390/polym13101559 ↗
5. Saraf C, Barodiya D. Post processing methods in fused deposition modelling-a review. In: 3rd International Symposium on 3d Printing Technology Towards Industry 4.0, Kolkata, October 2021.
6. 10.1007/s00170-022-09351-510.1007/s00170-022-09351-5 ↗
7. 10.1371/journal.pone.012291510.1371/journal.pone.0122915 ↗
8. 10.1016/j.compositesa.2022.10730810.1016/j.compositesa.2022.107308 ↗
9. 10.1186/s11671-023-03952-z10.1186/s11671-023-03952-z ↗
10. 10.1016/j.compositesa.2018.06.01810.1016/j.compositesa.2018.06.018 ↗
11. 10.1016/j.matpr.2022.02.31010.1016/j.matpr.2022.02.310 ↗
12. 10.1016/j.matpr.2022.05.31210.1016/j.matpr.2022.05.312 ↗
13. 10.1016/j.ijlmm.2020.03.00310.1016/j.ijlmm.2020.03.003 ↗
14. 10.1108/WJE-09-2018-032910.1108/WJE-09-2018-0329 ↗
15. 10.3390/mi1401012010.3390/mi14010120 ↗
16. Pandžić A · TEM J · 2021 · 10
17. 10.1186/s44147-023-00273-x10.1186/s44147-023-00273-x ↗
18. Mishra PK · J Inst Eng · 2023 · 105 · 275
19. 10.1007/s42452-019-1744-110.1007/s42452-019-1744-1 ↗
20. 10.3390/polym1502025510.3390/polym15020255 ↗
21. 10.1088/1757-899X/923/1/01204410.1088/1757-899X/923/1/012044 ↗
22. 10.1007/978-981-15-4485-9_2510.1007/978-981-15-4485-9_25 ↗
23. 10.26666/rmp.jesr.2019.2.510.26666/rmp.jesr.2019.2.5 ↗
24. 10.31803/tg-2022041311295510.31803/tg-20220413112955 ↗
25. 10.1177/073168441245267810.1177/0731684412452678 ↗