journal article·2025-08Open access

Process-induced skewness of flow fronts and fiber orientations in LFT-D compression molding considering processing, characterization, and simulation

Christoph Schelleis, Benedikt M Scheuring, Louis Schreyer, Wilfried V Liebig, Andrew Hrymak, Luise Kärger, Kay A Weidenmann, Frank Henning

Abstract

Mechanical properties of long fiber-reinforced thermoplastic (LFT) materials are defined by the fiber microstructure, including fiber orientation (FO). Compression molding of directly compounded LFT-D semi-finished materials results in pronounced anisotropy caused by fiber orientation mechanisms during material flow, with fibers aligning in flow direction. However, various authors noticed a deviation of the FO from the anticipated flow direction, which affected the mechanical properties and possibly blurred experimental conclusions. This study investigates possible reasons for this phenomenon, considering the process chain from plastificate and molding to final FO. For this purpose, we conduct a comprehensive mold-filling study comprising short shots and plates for mechanical characterization. A method is presented to characterize the skewness of the flow front of short shots. In addition, a method for deriving FO from tensile discs is applied. Both results are compared to a state-of-the-art simulation in which results from the characterization of the semi-finished LFT material, the plastificate, are considered. The results indicate that the density distribution of the LFT-D plastificate is not homogeneous; the influence of extrusion time causes a density gradient of around 10 %. This can be traced across the mold filling, where the flow fronts as well as the FOs are skewed towards the most recently extruded portion of the LFT, as well as to the FO. An FO deviation from the flow direction between 10° and 15° is found.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Epoxy Resin Curing Processes · Electronic Packaging and Soldering Technologies · Composite Material Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Fraunhofer Institute for Chemical Technology ICT

Institute of Vehicle Systems Technology

Karlsruhe Institute of Technology

Institute for Applied Materials

Western University

Institute of Materials Resource Management

University of Augsburg

Funding

Deutsche Forschungsgemeinschaft

References (33)

Show source-provided references
1. 10.1080/09506608.2019.158500410.1080/09506608.2019.1585004 ↗
2. Witten E Mathes V. The european market for fibre-reinforced plastics and composites 2022: market developments trends challenges and outlook. https://www.avk-tv.de/files/20230425_2023_avk_market_report_final.pdf
3. 10.3139/9781569906958.fm10.3139/9781569906958.fm ↗
4. Eyerer P, Krause W, Geiger O, et al. Development of a technology for the large-scale production of continuous fiber reinforced composites. SPE Annual Technical Conference ANTEC 2006. https://www.researchgate.net/publication/274138649_KRAUSE_W_GEIGER_O_HENNINGF_EYERER_P_Development_of_a_Technology_for_the_Large-Scale_Production_of_Continuous_Fiber_Reinforced_Composites_SPE_Annual_Technical_Conference_ANTEC_john_B_Hynes_Convention_C
5. 10.1016/S0034-3617(05)00546-110.1016/S0034-3617(05)00546-1 ↗
6. 10.3390/polym1509204110.3390/polym15092041 ↗
7. 10.1080/13588265.2019.160297310.1080/13588265.2019.1602973 ↗
8. McLeod M Hétu JF Deaville T et al. Morphological and mechanical comparision of injection and compression moulding in-line compounding of direct long fibre thermoplastics. In: Proceedings of the 10th Annual SPE ACCE. 10th Annual SPE Automotive Composites Conference and Exhibition (ed). Troy MI USA. https://archives.speautomotive.com/SPEA_CD/SPEA2010/tp.htm.
9. Tröster S. Materialentwicklung und -charakterisierung für thermoplastische Faserverbundwerkstoffe im Direktverfahren, Wissenschaftliche Schriftenreihe des Fraunhofer ICT. Stuttgart, Germany: Fraunhofer- IRB-Verl, 2004, vol volume 39.
10. 10.18419/opus-178810.18419/opus-1788 ↗
11. Schelleis C Scheuring BM Hrymak A et al. Study on mechanical characteristics of glass fiber reinforced polycarbonate lft-d for codico structures. In: Falzon B McCarthy C (eds.) Proceedings of the 23rd International Conference on Composite Materials (ICCM 2023). Belfast United Kingdom: Queen’s University Belfast 2024 pp. 1–10. doi:10.24406/H-451656.10.24406/H-451656 ↗
12. Schelleis C Hrymak A Henning F. Optimizing processing parameters for glass fiber reinforced polycarbonate lft-d composites. In: SAMPE Europe (ed) SAMPE Europe Conference. Madrid Spain: SAMPE Europe 2023 pp. 1–13. doi:10.24406/PUBLICA-2084.10.24406/PUBLICA-2084 ↗
13. 10.1177/07316844840030020110.1177/073168448400300201 ↗
14. 10.1016/j.compositesa.2017.05.02110.1016/j.compositesa.2017.05.021 ↗
15. Schreyer L Blarr J Höger K et al. Generation of initial fiber orientation states for long fiber reinforced thermoplastic compression molding simulation. DOI:10.5445/IR/1000155599.10.5445/IR/1000155599 ↗
16. 10.1016/j.compscitech.2013.06.00910.1016/j.compscitech.2013.06.009 ↗
17. 10.1016/j.commatsci.2023.11228610.1016/j.commatsci.2023.112286 ↗
18. 10.1016/j.ijmecsci.2024.10947010.1016/j.ijmecsci.2024.109470 ↗
19. 10.1016/j.matdes.2017.03.01010.1016/j.matdes.2017.03.010 ↗
20. 10.1016/j.compositesb.2023.11092710.1016/j.compositesb.2023.110927 ↗
21. 10.1002/pen.76031180610.1002/pen.760311806 ↗
22. 10.1016/j.compscitech.2015.05.02010.1016/j.compscitech.2015.05.020 ↗
23. 10.5445/IR/100017711210.5445/IR/1000177112 ↗
24. 10.21105/joss.0529510.21105/joss.05295 ↗
25. Perez C, Osswald T, Goris S. Study on the fiber properties of a lft strand. SPE ACCE, 2013, pp. 1115–1126.
26. Schreyer L Scheuring BM Christ N et al. Continuous simulation of a continuous-discontinuous fiber reinforced thermoplastic (codicofrtp) compression molding process. In: Falzon B McCarthy C (eds.) Proceedings of the 23rd International Conference on Composite Materials (ICCM 2023). Belfast United Kingdom: Queen’s University Belfast 2024 pp. 1–12. doi:10.5445/IR/1000163456.10.5445/IR/1000163456 ↗
27. 10.1002/app.1981.07026072110.1002/app.1981.070260721 ↗
28. Rohan K McDonough TJ Ugresic V et al. Mechanical study of direct long fiber thermoplastic carbon/polyamide 6 and its relations to processing parameters. In Proceedings of the 14th Annual SPE ACCE. 14th Annual Automotive Composite Conference and Exhibition; Novi MI USA.
29. 10.24406/publica-78510.24406/publica-785 ↗
30. 10.1007/s00170-023-12017-510.1007/s00170-023-12017-5 ↗
31. 10.1122/1.54994510.1122/1.549945 ↗
32. 10.1109/TVCG.2010.19910.1109/TVCG.2010.199 ↗
33. Meckes L. Charakterisierung des LFT-D Plastifikates: Methodenentwicklung und Ermittlung der Prozesszusam- menhänge mit Fokus auf die Dichteeigenschaften. Master thesis. Karlsruhe Germany: Karlsruhe Institute for Technology 2024. DOI: 10.24406/h-477101.10.24406/h-477101 ↗