journal article·2024-07

Optimizing process parameters of fused deposition molding for 3D printing customized control of polyetheretherketone scaffolds

Jingfeng Sun, Mantao Chen, Hui Zhao, Wenxu Zheng, Wuyi Zhou

Publisher page

Abstract

Polyetheretherketone (PEEK), with good biocompatibility and similar mechanical properties to natural bone, is extensively employed in the manufacture of prostheses. However, the precision and mechanical properties of current implants are major challenges for clinical applications. In this study, the effect of pore size, raster angle and printing temperature were investigated on length, width, thickness, material consumption, compressive strength and Young’s modulus. Taguchi design of experiment method was used to reduce the number of experiments and optimize the printing process parameters. Finally, predictive analysis was exploited to give the optimal set of process parameters. Experimental results indicated that the approach applied in this work provided more accurate predictions and control of the response variables. The maximum compressive strength and compressive modulus of PEEK scaffolds reached 43.4 MPa and 253.3 MPa, respectively. Therefore, the methodology of present work has the potential to meet the demand of design precision and manufacture of customized bone substitutes.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Bone Tissue Engineering Materials · 3D Printing in Biomedical Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

South China Agricultural University

Funding

Nanning Local Scientific Research and Technology Development Plan Project · The University Teachers Innovation Research Project · The Guangzhou Science and Technology Plan Project · IER Foundation 2021

References (39)

Show source-provided references
1. 10.1016/j.compstruct.2017.08.08810.1016/j.compstruct.2017.08.088 ↗
2. 10.1016/j.jmatprotec.2016.09.00510.1016/j.jmatprotec.2016.09.005 ↗
3. 10.1002/app.5457610.1002/app.54576 ↗
4. 10.1016/j.jallcom.2020.15434710.1016/j.jallcom.2020.154347 ↗
5. 10.1243/09544054JEM156510.1243/09544054JEM1565 ↗
6. 10.1108/1355254031048963110.1108/13552540310489631 ↗
7. 10.1016/j.compositesb.2018.02.01210.1016/j.compositesb.2018.02.012 ↗
8. 10.1007/s00170-022-09360-410.1007/s00170-022-09360-4 ↗
9. 10.1016/j.matlet.2022.13320610.1016/j.matlet.2022.133206 ↗
10. 10.3390/polym1420429310.3390/polym14204293 ↗
11. 10.1016/j.matdes.2018.03.01510.1016/j.matdes.2018.03.015 ↗
12. 10.1016/j.addma.2018.01.00210.1016/j.addma.2018.01.002 ↗
13. 10.1007/s00170-022-08663-w10.1007/s00170-022-08663-w ↗
14. 10.1177/0892705722109232710.1177/08927057221092327 ↗
15. 10.1177/0892705721105303610.1177/08927057211053036 ↗
16. 10.1016/j.matdes.2017.03.06510.1016/j.matdes.2017.03.065 ↗
17. 10.1002/app.4908710.1002/app.49087 ↗
18. 10.1177/089270572199753410.1177/0892705721997534 ↗
19. Mohamed T, Barhoumi N, Lamnawar K, et al. Optimization of fused deposition modeling process parameters using the Taguchi method to improve the tensile properties of 3D-printed polyether ether ketone. Proc Inst Mech Eng Part L 2021; 235(11): 2565–2573.
20. 10.1016/j.jmatprotec.2005.02.25910.1016/j.jmatprotec.2005.02.259 ↗
21. 10.1016/j.jmapro.2022.11.05710.1016/j.jmapro.2022.11.057 ↗
22. 10.1016/j.matdes.2019.10775810.1016/j.matdes.2019.107758 ↗
23. 10.1108/RPJ-07-2021-016610.1108/RPJ-07-2021-0166 ↗
24. 10.1177/0892705722108983210.1177/08927057221089832 ↗
25. 10.1016/j.cja.2020.05.04010.1016/j.cja.2020.05.040 ↗
26. 10.1016/j.jmbbm.2021.10447510.1016/j.jmbbm.2021.104475 ↗
27. 10.1177/089270572096456010.1177/0892705720964560 ↗
28. 10.1177/089270571456311910.1177/0892705714563119 ↗
29. 10.1016/j.compstruct.2018.09.07210.1016/j.compstruct.2018.09.072 ↗
30. 10.1080/00223980.1973.991560310.1080/00223980.1973.9915603 ↗
31. 10.1016/j.jmatprotec.2006.11.09510.1016/j.jmatprotec.2006.11.095 ↗
32. 10.1007/s00170-020-05555-910.1007/s00170-020-05555-9 ↗
33. 10.1016/j.matdes.2009.04.03010.1016/j.matdes.2009.04.030 ↗
34. 10.1080/00224065.2003.1198023210.1080/00224065.2003.11980232 ↗
35. Mahmood S, Qureshi AJ, Talamona D. Taguchi based process optimization for dimension and tolerance control for fused deposition modelling. Addit Manuf 2018; 21: 183–190.
36. 10.6028/jres.096.03410.6028/jres.096.034 ↗
37. 10.1108/RPJ-04-2014-005610.1108/RPJ-04-2014-0056 ↗
38. 10.1016/j.jmatprotec.2019.03.01610.1016/j.jmatprotec.2019.03.016 ↗
39. 10.1016/j.msec.2021.11233310.1016/j.msec.2021.112333 ↗