journal article·2025-12Open access

Preparation and characterization of basalt fiber (BF) reinforced acrylonitrile butadiene styrene (ABS)/cocoanut fiber (CF) hybrid composites: Study on mechanical, thermal and viscoelastic properties

Basanta Kumar Behera

Abstract

The shift towards natural fiber reinforcements in thermoplastic composites is gaining momentum, replacing traditional synthetic fibers like glass fiber. Among inorganic fibers basalt fiber (BF) stands out for its superior mechanical properties and broad industrial applications. This study focuses on developing Acrylonitrile Butadiene Styrene (ABS)/cocoanut fiber (CF) blend reinforced with varying BF concentrations (0, 10, 20, and 30 wt%). The ABS/CF blend as the matrix (95:5 ratio) was compounded using a two roll mill, followed by NaOH treatment of BF and compression molding for the preparation of composites. Whie a 10 wt% of BF addition resulted in the decrease in performance, but higher BF concentrations led to significant improvements. Notably, the addition of 30 wt% of BF enhanced the tensile strength by 4.74% and the specific tensile strength by 18.25%. Flexural strength and modulus also increased by 13.71% and 51.36% respectively. Furthermore, the storage modulus exhibited notable improvement across 30 – 85°C, while the impact strength improved by 72.7%. The heat deflection temperature (HDT) raised from 83°C to 96.2°C, marking 15.9% enhancement in HDT. The findings of this research work underscore the potential of BF in enhancing the mechanical, viscoelstic, and the thermal properties of ABS based composites.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Additive Manufacturing and 3D Printing Technologies · Mechanical Engineering and Vibrations Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

B.S. Abdur Rahman Crescent Institute of Science and Technology

References (43)

Show source-provided references
1. 10.1016/j.heliyon.2024.e2992010.1016/j.heliyon.2024.e29920 ↗
2. Lucas PF, Walter RW, Marco ADP. ABS composites with cellulose fibers: towards fiber-matrix adhesion without surface modification. Composites Part C 2021; 5: 100142.
3. Milena CS, Ivan M, Victor R, et al. Impact and flexural properties of ABS bio-composites reinforced with coir fiber. Coir fiber and its composites: processing, properties and applications. Elsevier, UK: Woodhead Publishing Series in Composites Science and Engineering, 2022, pp. 295–309, In preparation.
4. 10.1088/1757-899X/1248/1/01209810.1088/1757-899X/1248/1/012098 ↗
5. 10.1007/s40032-017-0435-110.1007/s40032-017-0435-1 ↗
6. Mohammed AO, Mustafa A. Investigation of ABS-rice straw composite feedstock filament for FDM. Rapid Prototyp J 2018; 24(3): 1067–1075.
7. 10.1007/s11814-015-0069-z10.1007/s11814-015-0069-z ↗
8. Santosh K, Shamprasad MS, Varadarajan YS, et al. Coconut coir fiber reinforced polypropylene composites: investigation on fracture toughness and mechanical properties. Mater Today Proc 2021; 46(7): 2471–2476.
9. 10.1038/s41598-021-83140-010.1038/s41598-021-83140-0 ↗
10. 10.1002/pc.2821410.1002/pc.28214 ↗
11. 10.1007/s40033-024-00727-310.1007/s40033-024-00727-3 ↗
12. 10.3390/jcs603007210.3390/jcs6030072 ↗
13. 10.1002/pc.2830410.1002/pc.28304 ↗
14. 10.1016/j.polymertesting.2020.10646710.1016/j.polymertesting.2020.106467 ↗
15. 10.1016/j.compositesb.2019.01.08510.1016/j.compositesb.2019.01.085 ↗
16. 10.3390/jcs303008910.3390/jcs3030089 ↗
17. 10.3390/polym1406122010.3390/polym14061220 ↗
18. 10.1007/s12221-017-6752-410.1007/s12221-017-6752-4 ↗
19. Ying S, Zhou X. Chemical and thermal resistance of BF in inclement environments. Mater Sci 2013; 28: 560–565.
20. 10.1016/j.compositesb.2018.12.14810.1016/j.compositesb.2018.12.148 ↗
21. 10.1080/19443994.2015.112964910.1080/19443994.2015.1129649 ↗
22. 10.1016/j.compositesb.2011.04.00110.1016/j.compositesb.2011.04.001 ↗
23. 10.1016/j.compscitech.2003.10.00110.1016/j.compscitech.2003.10.001 ↗
24. 10.1016/j.polymertesting.2018.03.04310.1016/j.polymertesting.2018.03.043 ↗
25. 10.1016/j.compositesb.2015.09.02810.1016/j.compositesb.2015.09.028 ↗
26. 10.1177/0021998322107734510.1177/00219983221077345 ↗
27. 10.3390/polym1502040810.3390/polym15020408 ↗
28. Morchid FE, Akkouri N, Elfarissi L, et al. Thermal and mechanical properties of a high-density polyethylene (HDPE) composite reinforced with wood flour. Mater Today Proc 2022; 72: 3602–3608.
29. 10.1002/pc.2853710.1002/pc.28537 ↗
30. 10.1016/j.conbuildmat.2023.13427010.1016/j.conbuildmat.2023.134270 ↗
31. 10.3390/met1211192510.3390/met12111925 ↗
32. 10.1007/s13726-021-00988-910.1007/s13726-021-00988-9 ↗
33. 10.1016/j.cirpj.2021.01.00210.1016/j.cirpj.2021.01.002 ↗
34. 10.1007/978-3-319-91713-9_1110.1007/978-3-319-91713-9_11 ↗
35. Toyoki M, Yuto S, Goda K. Major cause of strength improvement of a ramie/PA composite with low fiber contents. Adv Ind Eng Polym Res 2018; 1(1): 93–98.
36. Abdel GM, Mazen AA, El-Mahallawy NA. Application of the rule of mixture and Halpin – Tsai equations to woven fabric reinforced epoxy composites. J Eng Sci 2006; 34(1): 227–236.
37. 10.1039/D2MA00831A10.1039/D2MA00831A ↗
38. 10.1021/acsomega.6b0017510.1021/acsomega.6b00175 ↗
39. 10.1016/j.conbuildmat.2019.11746410.1016/j.conbuildmat.2019.117464 ↗
40. 10.7569/JRM.2017.63416210.7569/JRM.2017.634162 ↗
41. 10.3390/polym1107108510.3390/polym11071085 ↗
42. 10.1088/2053-1591/aae27410.1088/2053-1591/aae274 ↗
43. 10.1016/j.molstruc.2022.13318110.1016/j.molstruc.2022.133181 ↗