journal article·2026-02Open access

Experimental and failure analysis of the mechanical and fatigue properties of laser assisted hybrid stainless steel-thermoplastic composites joints

Mete Kayihan, Aysu Hande Yücel, Mustafa Bakkal

Abstract

Combining different types of materials increases its importance in lightweight component studies. However, conventional joining methods cannot provide perfect joining of dissimilar materials. In this context, glass fiber-reinforced Elium based thermoplastic materials and an AISI 304 stainless steel have been joined using laser-hybrid joining. After the joining operation, mechanical characterization tests (lap shear, compression shear, and three-point bending) were performed on coupon samples. In addition, after the tests, the joint grids have been examined and the failure type (cohesive/adhesive/mixed) has been analyzed. Moreover, fatigue tests have been applied to highlight the endurance of tensile-tensile loading condition. Finally, as a result of all these tests, it was determined that the laser-assisted bonding has a lap shear strength of nearly to 18 MPa and a fatigue life of up to 10 6 cycle at 30% UTS. As a result of all these tests, it was determined that the material maintains its strength in both dynamic tensile-tensile loading and static mechanical tests with the laser hybrid joining.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Material Properties and Applications · Surface Treatment and Coatings · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Istanbul Technical University

References (29)

Show source-provided references
1. McCrum NG, Buckley CP, Bucknall CB. Principles of polymer engineering. 2nd ed. Oxford University Press 1997; pp. 118–125.
2. 10.1080/09243046.2013.79521510.1080/09243046.2013.795215 ↗
3. 10.1080/10426914.2020.181954510.1080/10426914.2020.1819545 ↗
4. 10.1080/09243046.2023.217576410.1080/09243046.2023.2175764 ↗
5. 10.1016/j.procir.2019.10.00510.1016/j.procir.2019.10.005 ↗
6. 10.1016/j.optlastec.2016.09.02810.1016/j.optlastec.2016.09.028 ↗
7. 10.1002/pc.2988110.1002/pc.29881 ↗
8. 10.1016/j.jmatprotec.2011.01.02110.1016/j.jmatprotec.2011.01.021 ↗
9. Van der Straeten K, Engelmann C, Olowinsky A, et al. Comparison of laser-based joining approaches for plastic-metal-hybrids–strength vs. process speed. Proc. Hybrid Mater. Struct 2018; 203.
10. 10.1016/j.jajp.2020.10000810.1016/j.jajp.2020.100008 ↗
11. 10.1179/1362171814Y.000000023610.1179/1362171814Y.0000000236 ↗
12. 10.1179/1362171814Y.000000027610.1179/1362171814Y.0000000276 ↗
13. 10.1080/13621718.2020.171930410.1080/13621718.2020.1719304 ↗
14. 10.1080/13621718.2022.210602010.1080/13621718.2022.2106020 ↗
15. 10.1179/1362171811Y.000000006010.1179/1362171811Y.0000000060 ↗
16. 10.1080/13621718.2018.153578110.1080/13621718.2018.1535781 ↗
17. 10.1017/CBO9781139086233.02010.1017/CBO9781139086233.020 ↗
18. ASTM d3039/D3039M. 17 - standard test method for tensile properties of polymer matrix composite materials. West Conshohocken: ASTM, 2014.
19. ISO 14126:1999. Fibre-reinforced plastic composites - determination of compressive properties in the in-plane direction. Switzerland: ISO, 2001.
20. ASTM d7264/D7264M. 15 - standard test method for flexural properties of polymer matrix composite materials. West Conshohocken: ASTM, 2021.
21. ASTM d3479/D3479M. 12 - standard test method for tension-tension fatigue of polymer matrix composite materials. West Conshohocken: ASTM, 2023.
22. ISO 291. Plastics − Standard atmospheres for conditioning and testing. Switzerland: ISO, 2008.
23. ISO 16750-4:2010. Road vehicles — environmental conditions and testing for electrical and electronic equipment — Part 4: climatic loads. Switzerland: ISO, 2023.
24. 10.1016/j.procir.2020.09.17610.1016/j.procir.2020.09.176 ↗
25. 10.1007/s10103-012-1169-110.1007/s10103-012-1169-1 ↗
26. 10.1016/j.compositesb.2022.11005910.1016/j.compositesb.2022.110059 ↗
27. Kayihan M, Bakkal M. Fatigue life prediction of continuous glass-fiber reinforced elium thermoplastic composites via energy based thermographic approach. J Thermoplast Compos Mater 2024: 08927057241291783.
28. Goodman J. Mechanics applied to engineering. Harlow, UK: Longmans, 1899.
29. 10.1002/pc.2988110.1002/pc.29881 ↗