journal article·2005-09

Mechanical Properties of Hollow Glass Bead-filled ABS Composites

Ji-Zhao Liang

Publisher page

Abstract

In this article, three types of hollow glass beads (HGB1, HGB2, and HGB3) with different sizes and distribution are used as fillers. HGB1 has a small mean particle diameter and wide distribution, HGB2 has a large diameter and medium distribution, and HGB3 has a medium diameter and narrow distribution. The tensile, notched Charpy impact and flexural properties of HGB-filled acrylnitrile-butadiene-styrene copolymer (ABS) composites are measured at room temperature. It has been found that the Young’s modulus increases linearly with increasing volume fraction φ f of the fillers. The tensile yield stress and tensile stress at break decrease gently with the increase of φ f . For ABS/HGB2 system, the tensile fracture strength energy (E tb ) is obviously lower than that of the unfilled ABS. For ABS/HGB1 system, the E tb values are somewhat lower than that of the unfilled ABS. While for ABS/HGB3 system, the E tb values are slightly higher than that of the unfilled ABS. The notched Charpy impact strength decreases quickly at φ f ≤ 5%, and then decreases gently with increasing (φ f ). On the other hand, the flexural strength increases at φ f ≤ 5%, and then it decreases with increasing φ f . In general, the effects of filler size and its distribution on these mechanical properties are not significant.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Mechanical Behavior of Composites · Structural Analysis of Composite Materials · Natural Fiber Reinforced Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

College of Industrial Equipment and Control Engineering, South China University of Technology, Guangzhou 510640, PR China,

References (12)

Show source-provided references
1. 10.1002/pen.76012031010.1002/pen.760120310 ↗
2. Tang, C.Y. and Liang, J.Z. (2000). Proceedings of IMCC’2000, Hong Kong, August 16-17, pp. 45-46 .
3. 10.1002/pc.1014210.1002/pc.10142 ↗
4. 10.1002/pc.75008020810.1002/pc.750080208 ↗
5. 10.1007/BF0173060510.1007/BF01730605 ↗
6. 10.1002/app.1976.07020061610.1002/app.1976.070200616 ↗
7. 10.1007/BF0055174510.1007/BF00551745 ↗
8. 10.1002/pen.76035180310.1002/pen.760351803 ↗
9. 10.1002/pen.1156110.1002/pen.11561 ↗
10. 10.1002/(SICI)1097-4628(19990929)73:14<2985::AID-APP23>3.0.CO;2-F10.1002/(SICI)1097-4628(19990929)73:14<2985::AID-APP23>3.0.CO;2-F ↗
11. 10.1016/S0032-3861(98)00117-710.1016/S0032-3861(98)00117-7 ↗
12. 10.1002/(SICI)1097-0126(200002)49:2<170::AID-PI322>3.0.CO;2-U10.1002/(SICI)1097-0126(200002)49:2<170::AID-PI322>3.0.CO;2-U ↗