journal article·2004-03

Statistical Modeling and Response Surface Optimization of Extruded HDPE/Wood-Flour Composite Foams

Laurent M. Matuana, Qingxiu Li

Publisher page

Abstract

In this paper, a regression model was constructed to optimize the relationships between the void fraction of foamed HDPE/wood-flour composites, the processing conditions (extruder’s die temperature and screw speed rate), and the formulation compositions [chemical foaming agent (CFA) concentration and the moisture content of wood flour] by applying a four-factor central composite design (CCD) statistical approach. Design Expert software was employed to carry out the experimental design, statistical analysis, and numerical optimization. The analysis of variance (ANOVA) of the model showed that the void fraction of HDPE/wood-flour composites was a strong function of the extruder’s die temperature, the screw speed rate, and the moisture content of wood flour, while independent of the CFA content within the studied range (0 1%). In addition, the moisture content of wood flour and the extruder’s screw speed rate exhibited significant interaction effect on the void fraction of the foamed composites. The response surface optimization generated using the regression model suggests that HDPE/wood-flour composite foams with the highest void fraction can be achieved at the highest levels of extruder’s screw speed rate (120 rpm) and moisture content of wood flour (12%), together with the lowest levels of extruder’s die temperature (170 BC) and no chemical foaming agent.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Polymer Foaming and Composites · Natural Fiber Reinforced Composites · Epoxy Resin Curing Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Forestry, Michigan State University, East Lansing, Michigan 48824-1222, USA

School of Forestry and Wood Products, Michigan Technological University, Houghton, Michigan 49931-1295, USA

References (21)

Show source-provided references
1. 10.1177/0021955X960320050310.1177/0021955X9603200503 ↗
2. 10.1002/pen.1175810.1002/pen.11758 ↗
3. 10.1002/pen.1035610.1002/pen.10356 ↗
4. 10.1002/vnl.1026910.1002/vnl.10269 ↗
5. 10.1002/vnl.1028210.1002/vnl.10282 ↗
6. 10.1177/02624893010200020310.1177/026248930102000203 ↗
7. 10.1002/app.1200310.1002/app.12003 ↗
8. 8. Zhang, H., Rizvi, G. M., and Park, C. B. (2003). Development of an Extrusion System for Producing Fine-Celled HDPE/Wood-Fiber Composite Foams Using CO2, Adv Polym Tech, in press.10.1002/adv.20016 ↗
9. 10.1002/vnl.1005810.1002/vnl.10058 ↗
10. 10.1002/pen.1134510.1002/pen.11345 ↗
11. 10.1002/vnl.1037310.1002/vnl.10373 ↗
12. 12. Montgomery, D. C. (1996). Design and Analysis of Experiments, John Wiley & Sons, Inc., New York .
13. 13. Myers, R. H. and Montgomery, D. C. (1995). Response Surface Methodology: Process and Product Optimization Using Designed Experiments, John Wiley & Sons, Inc., New York .
14. 14. Khuri, A. I. and Cornell, J. A. (1996). Response Surfaces: Designs and Analyses, Marcel Dekker, Inc., New York .
15. 10.1021/jf001050q10.1021/jf001050q ↗
16. 10.1021/op000088110.1021/op0000881 ↗
17. 10.1007/s00253005094010.1007/s002530050940 ↗
18. 10.1021/es001802x10.1021/es001802x ↗
19. 10.1002/vnl.1028110.1002/vnl.10281 ↗
20. 20. Skaar, C. (1988). Wood–Water Relations, Springer-Verlagcomma, New York .10.1007/978-3-642-73683-4 ↗
21. 10.1080/00224065.1980.1198096810.1080/00224065.1980.11980968 ↗