journal article·2017-02

Fabrication of high-density polyethylene/multiwalled carbon nanotube composites via submerged friction stir processing

Jicheng Gao, Yifu Shen, Chao Li

Publisher page

Abstract

The focus of this work was to study the effect of multiwalled carbon nanotubes (MWCNTs) on morphology, mechanical, and thermal properties of high-density polyethylene (HDPE) nanocomposites. MWCNTs/HDPE nanocomposites were prepared using submerged friction stir processing (SFSP) technique. The pristine MWCNTs without any pretreatment were blended with HDPE at a fixed traverse speed of 30 mm min −1 and various rotational speeds ranging from 1200 r min −1 to 2100 r min −1 . The effect of rotational speed on MWCNTs dispersion in HDPE matrix was assessed using scanning electron microscopy. The experimental results showed the rotational speed affected the disperision of the MWCNTs. The mechanical properties of the composites were measured, and the results indicated that the tensile strength increased at first and then decreased with the increase of the rotation speed. The thermal properties of MWCNTs-filled HDPE nanocomposites were studied by differential scanning calorimetry, and the crystalline content of the prepared composites by the SFSP technology was increased. From the experimental research, it was found that the SFSP technique was a practical way to fabricate polymeric composites.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis · Tribology and Wear Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

College of Material Science and Technology, Nanjing University of Aeronautics and Astronautics, Nanjing, People’s Republic of China

References (32)

Show source-provided references
1. 10.1016/j.polymer.2014.04.05210.1016/j.polymer.2014.04.052 ↗
2. 10.1177/089270571244680210.1177/0892705712446802 ↗
3. 10.1177/089270571140184510.1177/0892705711401845 ↗
4. 10.1177/089270570910597810.1177/0892705709105978 ↗
5. 10.1016/j.polymer.2012.11.04210.1016/j.polymer.2012.11.042 ↗
6. 10.1177/089270571039745610.1177/0892705710397456 ↗
7. 10.1016/j.carbon.2003.10.02810.1016/j.carbon.2003.10.028 ↗
8. 10.1177/089270571140615910.1177/0892705711406159 ↗
9. 10.1177/089270571141265010.1177/0892705711412650 ↗
10. 10.1177/089270571143053210.1177/0892705711430532 ↗
11. 10.1177/089270571245503610.1177/0892705712455036 ↗
12. Choudhury M · J Thermoplast Compos
13. 10.1016/j.mser.2005.07.00110.1016/j.mser.2005.07.001 ↗
14. 10.1016/j.acme.2013.01.00310.1016/j.acme.2013.01.003 ↗
15. 10.1016/j.msea.2012.01.05510.1016/j.msea.2012.01.055 ↗
16. 10.1016/j.pmatsci.2008.05.00110.1016/j.pmatsci.2008.05.001 ↗
17. 10.1016/j.matchar.2013.05.01010.1016/j.matchar.2013.05.010 ↗
18. 10.1533/9780857094551.110.1533/9780857094551.1 ↗
19. 10.1016/j.jmatprotec.2014.04.02610.1016/j.jmatprotec.2014.04.026 ↗
20. 10.1016/j.jmapro.2013.08.00710.1016/j.jmapro.2013.08.007 ↗
21. 10.1016/j.msea.2010.12.08310.1016/j.msea.2010.12.083 ↗
22. 10.1002/app.4105910.1002/app.41059 ↗
23. 10.1016/j.matdes.2012.12.02610.1016/j.matdes.2012.12.026 ↗
24. 10.1016/j.msea.2013.01.02610.1016/j.msea.2013.01.026 ↗
25. 10.1016/S1003-6326(13)62573-X10.1016/S1003-6326(13)62573-X ↗
26. 10.1016/j.matdes.2012.06.05910.1016/j.matdes.2012.06.059 ↗
27. 10.1016/j.matdes.2013.12.03810.1016/j.matdes.2013.12.038 ↗
28. 10.1016/S0008-6223(03)00387-710.1016/S0008-6223(03)00387-7 ↗
29. Strand SR · 1 · 1078
30. 10.1002/app.3900010.1002/app.39000 ↗
31. 10.1016/j.msea.2005.12.01910.1016/j.msea.2005.12.019 ↗
32. 10.1016/j.eurpolymj.2012.01.00210.1016/j.eurpolymj.2012.01.002 ↗